Snr Mechanical Engineer

Profession: Power/Mechanical Engineer

Specialisation: Technical and economic expertise on various energy related technologies (Steam Turbine, CGT SiGe, HRSG, OSTG, Evaporative Heat Rejection, trigeneration)

Experienced in concept design, detailed design, specification, procurement and commissioning.

Preparation of MFC for EPC contracts and technical review of EPC contractor’s proposals.

Title: Senior Mechanical Engineer (CEng)

Education:

MSc Renewable Energy Engineering 2001, Reading University.

BEng (Hons), Energy Engineering 2000, LSBU

French Degree in Energy and Heat & Mass Transfer Engineering.

Registrations: Chartered Engineer

Certifications:

Construction skill scheme certified (CSCS),

Engineering Construction Industry certified, ECITB.

Affiliations: Institute of Mechanical Engineering,

Awards: 2012 K.Dale Technical Travel bursary (Japan, USA, China)

Deivy is a chartered engineer with over 10 years’ experience. He has gained his initial experience in France as a site mechanical engineer working on cogeneration plant (Centrax, Gas turbine, Allison 501-KB7 with district heating scheme). He has been working in the UK for 10 years on feasibility to concept design of various cogeneration schemes with prime movers (medium speed gas engines, steam and gas turbines). Deivy has produced MFS for GDF and Marubeni (namely IWPP Facility D). He has also developed valuable knowledge on Utility boilers by comparing technicalities of Foster Wheeler and Alstom CFB Boilers. Deivy was involved in the London 2012 Olympic Games power plant. (200MW heat, 64MW chilled, 50MW electrical with Spark Ignition Gas Engine (medium speed)). He has managed several packages for a total value of over £20M.

Special Fields of Knowledge:

• Technical and Economic assessment of Thermal Plants (OCGT, CCGT SiGe, HRSG, WHRU);

• P&ID and Heat Balance review ;

• Balance of Plant ;

• Rotating equipment (medium and low speed engines);

• Piping engineering (B31.1/B31.3/EN13480);

• Hydraulic and heat and mass transfer modelling;

• CDM, auditing, and risk assessment;

• Specification preparation, Tender prequel/evaluation, Commissioning and Testing.

Languages: English, French and VBA for MS Excel.

Employment History:

Jacobs 2013 – present

Title : Senior Mechanical Engineer

PROJECT STATFORD ENERGY FROM WAST PLANT (OPERATED BY VEOLIA)

Client: Local authorities

Role: Consultant/ Cost Estimator

Key achievements:

• FEED and AACE Cost estimate for implementing a dedicated district heating scheme on existing waste driven Siemens pass out turbine.

PROJECT Facility D, IWPP, INTEGRATED WATER AND POWER PLANT

Client: GdF Suez.

Role: Developers Engineer

Key achievements:

• Technical review RFB, specification of Rotating and Piping equipment’s of the EPC contract.

• Technical review of the Contractor proposal

PROJECT Technical Review Oil Shale fired Boilers

Client: a Government.

Role: Technical Adviser

Key achievements:

• Technical review Alstom and FWC, Circulating Fluidized Bed boilers.

PROJECT OPC ROTEM COMBINED CYCLE POWER STATION

Client: OPC ROTEM Ltd.

Role: Lenders Engineer

Key achievements:

• Technical review of the oil fired procedure performance test for the 400 MW CCGT,

• Technical review of the Due Diligence Report

Parsons Brinckerhoff 2005 – 2013

Title : Senior Mechanical Engineer

PROJECT Citigen Replanting, City of London

Client: E.ON

Role: Owners Engineer

Key achievements:

• Review of the plant Mothballing strategy,

• Engines options appraisal, (Gas turbine, medium speed gas engines)

• Hazops studies,

• Thermal optimisation of district network.

• Technical review of Balance of Plant

PROJECT Addenbrook Hospital, Cambridge, UK

Client: Utilyx, (former MITIE)

Role: Owners Engineer

Key achievements:

• Design of the P&ID of the Steam and Condensate Loop,

• Manage the procurement of items of plants and BOP (DNOX, Oil transfer, WTP).

PROJECT Energy from Waste, Biossence East London ldt 2013

Client: Biossence East London ldt 2013

Role: Technical advisor

Key achievement: Capital Cost Assessment of the heat recovery scheme. Selection of the steam / water Shell and tube heat interface for the EfW plant.

PROJECT Beddington ERF assessment, Viridor Waste Management site.

Client: Beddington, Borough of Sutton (LBS)

Role: Technical advisor

Key achievement:

• Capital Cost Assessment of the Total Energy Scheme for the upgrade of the EfW plant.

• Hydraulic modelling and costing of the district heating pipework

• Full capital investment review of the heat recovery scheme for the existing Spark ignition engine onViridor site (Jenbacher).

PROJECT NOVA (former VC) VTI (Victoria Transfer Interchange)

Client: Land security

Role: Owners Engineer

• Design of the Energy centre Trigeneration scheme (high speed engines)

• Preparation of specification documents, review of technical submittals, value engineering.

• Specification for medium speed engines and heat recovery units.

Project CCHP City University

Client: City University of London

Role: Owners Engineer

• Project manager of the £k125 fee project.

• Detailed Design of the engine heat recovery system and medium speed engines

Project London 2012 Olympic

Client: Cofely East London Energy ltd

Role: Owners Engineer

• Technical review of the prime mover options appraisal

• Full Hydraulic modelling, sizing and costing of the 5 district networks (3 heating and 2 chilled)

• Design of the LTHW, HTHW and Condenser Water P&ID

• Writing specification for boilers, pumps, absorption chilling, evaporative heat rejections, flues, thermal stores and balance of plant

• Manage prequalification and tender review on a technical basis (total value of £20M)

Project Israel Eshkol 2009

Client:

Role: Designers and owners engineer

• Front End Design Engineering Integration of steam driven vapour absorption chillers.

• Thermal Interface between Gas turbine heat recovery and large scale refrigeration plant

• Full design of the steam and condensate loop P&IDs.

Project Huddersfiled district heating scheme

Client: Kirklees Metropolitan Council

Role: Feasibility study

• Technical assessment of the different heat supply option (gas turbine, Steam turbines, and low speed engines ).

• Hydraulic modelling of district network.

• Capital cost estimation of the overall scheme.

Project Dunfermline Community energy Project 2008

Client: Fife Council

Role: Feasibility Study and Owners Engineer

• Feasibility through to concept design and construction of a pipe connection between a 2MWe landfill generation plant (medium speed engines) and existing public and residential local authority owned buildings.

Project London Thames Gateway Heat Network 2008

Client: London Development Agency

Role: Consulting/Studies

• Option appraisal for the cogenerations strategy.

• Site surveying of the least cost DH route in surveying the route of the 14 kilometres heat transmission main from Barking Power Station to potential customers across the Royal Docks and City area.

Project Citigen Replanting feasibility study 2008

Client: Eon, Citigen

Role: Consulting/Studies

• Feasibility study for extending and hydraulically optimizing the existing district heating and cooling networks. Work also included on-site work for the re-planting feasibility study.

Project Cooling the Tube project 2007 (TfL)

Client: Transport for London

Role: Feasibility study

• Concept design and budgeting of the fully centralized option

• Trigeneration assessment, investigating technical aspect of medium speed and gas turbine.

Project EDF Energy Barkantine Heat & Power 2007

Client: EdF Energy

Role: Consulting/Studies

• Capacity assessment and hydraulic optimisation of the existing district heating network.

Energie Demain 2004 – 2005

Title : Project Engineer

• Total Energy Scheme modeling using Excel and VBA tools

• Technico-Economic assessment of Combined Heat Power (Cogeneration) and district networks in la defense Nanterre, L’eco-quartier Hoche.

ADEME, Guyane 2003 – 2004

Title : Project Engineer

• Energy efficient building in equatorial climate

• Energy strategies in the fishing industry

ElyoCofely, France 6 months1999

Title : Graduate Site Engineer

• Technical assessment of new and existing consumers to optimise the total energy scheme. (Site with GasTurbine and Geothermal wells and district networks).

Extracurricular:

UK standard cyclist instructor, avid traveller, Long distance swimmer, enjoy thermal modelling, enjoys watching and practicing juggling. Football player.

Contact this candidate