ANNEXURE

PROJECT EXPERIENCE

*. Client: ADDAR Group

Project: FEED & Detailed Design Engineering of Specialty Chemical and

Liquid SO2 plant

Location: Jubail, KSA

Duration: 16 months till date

Hazardous Area Classification: Zone 0/1 (Ex 'ia')

Project Synopsis:

ADDAR GROUP was founded in 1999 as an Industrial / IT consulting company by

H.E. Dr. Ibrahim A. Ibn Salamah after his retirement from SABIC as a vice-

chairman and managing director.

The project was first of the specialty chemical plants by the ADDAR Chem

group in the chain of 7 future plants on the same lines to be set up in

next 10 years. It required production of 1500 TPD production of Sulpholane

and 1000 TPD production of SO2 plant.

Typical Learning:

. Validation of Basic Engineering Packages

. Instrumentation on typical services like Hydrogen, Isopropyl Alcohol,

Butadiene, Caustic Lye,etc

. Close interaction with LSPB contractors for selection of instruments

and misc. I&C items.

. Clear Distinction between engineering requirements from LSPB

contractor at bid stage and post bid award stage.

2. Client: Sonangal Logistica & Petrobras

Project: Basic & Detailed Design Engineering for Topsides Jetty

Location: Namibia, Africa

Duration: 18 months

Hazardous Area Classification: Zone 0/1 (Ex 'ia')

Project Synopsis:

A topsides jetty is used for loading/unloading of petroleum products like

Gasoline, Jet A1, Kerosene, etc. and transporting the fuel to tank farm

located around 10 km away via underground pipe lines. Detailed engineering

of entire loading/unloading till tank farm was project scope.

Typical Learning:

. Pipeline Leak Detection Systems

. Engineering for 16" Coriolis Flowmeter for process application

. Custody Transfer Flow Metering System

. Instrumentation Requirements for Utility and Process packages.

3. Client: Qatar Petroleum

Project: Basic & Detailed Design Engineering for Desalination Plant

Location: Halul Island, Qatar

Duration: 16 months

Hazardous Area Classification: Zone 0/1 (Ex 'ia')

Project Synopsis:

The design team was required to be directly stationed at Client Office in

Doha since close and face to face coordination was essential with QP top

engineers to adapt to volatile project needs. A desalination plant with a 4

reverse osmosis systems and required dosing for disinfection of water for

generating & supply potable water supply to QP Halul Island residents.

Typical Learning:

. QP Offshore Engineering Standards

. Instrumentation on severely corrosive services like Sea Water and 99%

H2SO4

. SIL Evaluation Study

4. Client: Emirates National Oil Company

Project: Basic Design & Cost Engineering for LPG Terminal

Location: Namibia, Africa

Duration: 12 months

Hazardous Area Classification: Zone 0/1 (Ex 'ia')

Project Synopsis:

A new Mounded Liquefied Petroleum Gas (LPG) bulk storage terminal with LPG

handling facilities was developed after being transported from a topsides

jetty. The LPG is loaded onto trucks using Truck Loading Automation System.

Typical Learning:

. Radar Tank Gauging System

. General Specification for Terminal Automation System

5. Client: Kansai Nerolac

Project: Basic & Detailed Design Engineering of Nerolac Paints

Location: Hosur, India

Duration: 8 months

Hazardous Area Classification: Zone 0/1 (Ex 'ia')

Project Synopsis:

Detailed design production plant for 2500 TPD OEM Paints (Automobile Paint)

and 3000 TPD DECO Paints (Decorative Paints) ranging over 4 Process

Buildings, Offsite Building and Utility Building.

Typical Learning:

. Instrumentation on typical services like DECO and OEM (Paints) &

Resins.

. Cable Tray Routing for 100 km Instrument Signal Cables, 152 Ex 'd'

Junction Boxes and 22 RIO Cabinets

MAYANK MALHOTRA

( : +91-958*******

( : acgzje@r.postjobfree.com, acgzje@r.postjobfree.com

JOB OBJECTIVE

To seek assignments in the field of Design Engineering whilst ensuring

professional and personal growth.

SUMMARY

. Possess 6 years of experience in Instrumentation & Control Design

Engineering, Procurement & Vendor Management majorly in Oil & Gas,

Speciality Chemical & Process Plants.

. Involved in Basic, FEED, Detailed Design Engineering.

. Well versed with various National & International Standards/Codes such as

API, ISA, IEC, ISO, ANSI, ASTM, ASME used in Instrumentation & Control

Design

. Exposure to and application of QP Onshore Standards & SHELL DEP

Standards.

. Adept in managing procurement, installation & commissioning activities

involving resource planning, in-process inspection, team building and co-

ordination with internal / external departments

. Keen contributor in developing Instrumentation Engineering SOP and

Standard Checklists for L&T-Technology Services.

. Involved in man-hour estimation for 50+ proposals.

. Adjudged twice as Top Performer among 3 appraisal cycles till date.

. Well versed with standards of Hazardous Area Approval agencies such as

ATEX, etc.

. Effective communicator & negotiator with strong analytical, problem

solving & organizational abilities

. For projects handled; please refer to the Annexure

ORGANIZATIONAL EXPERIENCE

Since Nov'08: Larsen & Toubro Technology Services, Vadodara as

Senior Instrumentation and Controls Engineer

(Assistant Manager)

CORE COMPETENCIES

Technical Competencies

. Involved in Process PID development & preparation of Design Basis

Documents

. Selection & Sizing of Instruments/Control Valves.

. Executing standard Instrumentation Deliverables:

o Instrument Datasheets and Specifications

o Hookup Diagrams, Instrument Installation Drawings

o Instrument Cable Schedule, Cable Tray Sizing and Routing Drawings

o Loop Drawings, Logic diagrams, Program Flow Diagrams, Junction Box

Schematics and Interconnection drawings

o Control System Functional Description Document

o UPS/Air Consumption Calculations

o PRV/PSV/Self Operated Regulator selection

o Instrumentation & Commissioning Specification

. Selection & sizing of Process Analysers.

. Instrumentation Requirements for Utility and Process packages.

. Developing Material Requisitions for Instruments; carrying out

Technical Bid Evaluations and generating Technical Queries upon the

same.

. Preparing Material Take Off

. Carrying out Safety Interlock review, Instrument Protective functions

(SIS), SIL study, Hazardous area instrumentation

. Conducting Vendor Document verification & collecting/gathering

product specifications & analyzing and modifying / upgrading existing

designs

Managerial Competencies

. Leading a group of 4 core and 4-6 flexible Design Engineers.

. Active involvement in Resource Planning, checking 'Utilization' and

'Billability' for the team.

. Immediate Superior (IS) responsible for annual performance appraisal

review for 10 Design Engineers

. Head Co-coordinator for weekly intra department "Lessons Learnt"

session.

TECHNICAL SKILLS

Programming Languages: C

Design Software: AutoCAD

Instrumentation Software: CONVAL (Instrument Sizing and Orifice

Sizing), SPI-Intools (Basic)

Software Package: MS-Office Suite (Word, Excel & PowerPoint)

EDUCATION

2008 B.E. (Electronics & Instrumentation) from Institute of Technology &

Management, Gurgaon with 70.08 %

2004 HSC from Delhi Public School, Vasant Kunj, New Delhi

with 75.4%

EXTRACURRICULAR ACTIVITIES/ACHIEVEMENTS

. Shortlisted by Baroda Management Association for 20 Annual Awards for

Outstanding Young Managers-2011(AAOYM) on the theme Change Management

in Industries - Yesterday, Today and Tomorrow

. Awarded with "Valuable Contribution Award" at organizational level

based "Estrellas-2013" employee recognition function

. Successfully completed certificate course for MS-Office by L&T-

Learning Management Team.

. First runner up in inter-college football tournament

PERSONAL DETAILS

Date of Birth: 22nd July, 1987

Linguistic Abilities: English, Hindi & Punjabi

Contact this candidate