Ronnie Marquez Marquez
#** ***** *, ****** *** Fernando City
Mobile No.: +639*********
Email Add: acgwv6@r.postjobfree.com
Skype ID: ronnie-marquez
Current Location: Philippines
[pic]
PERSONAL DATA
Age:
44
Date of Birth:
Aug 18, 1970
Gender:
Male
Civil Status:
Married
Height:
162 cm
Weight:
68 kg
Nationality:
Filipino
Religion:
Christianity - Roman Catholic
Permanent Address:
#74 Purok 5, Bacsil, San Fernando City
La Union, Philippines 2500
WORK EXPERIENCE
I have been working for 18 years
1. Position: Electrical Instructor
Duration: July 01, 2013 - October 2014
School: Don Mariano Marcos Memorial State University
(Philippines)
Location: Quezon Avenue, Sevilla, San Fernando, La Union
Department: College of Technical Education
Job Description: ( Conduct classroom lectures on subjects related to
Practical Electricity, House Wiring, AC/DC Motors and Motor Controls,
Electro-pneumatics and Basic PLC, Transformers and Basic Distribution
Lines as well as Industrial Electrical Maintenance.
( Facilitates practical classroom laboratory on subjects related to
Practical Electricity, House Wiring, Basic Electro-pneumatics, Basic
PLC, Basic Distribution Lines, Transformers, Motors and Generators.
( Assess students and give necessary coaching to improve their skills to
be able to teach and practice the following subjects stated above.
2.
Position:
Senior Engineer II
Duration:
Jan 17, 2011 - Oct 09, 2012 (1.75 yrs)
Company:
QT Technology (Singapore)
Company Industry:
Semiconductor (Service)
Location
Woodlands Spectrum II Singapore
Department:
Engineering Operations
Job Description:
( Leads to carry out refurbishment, assembly, testing and calibration of
highly sophisticated equipment, machines, chambers used to manufacture
semiconductor products including all accessories and peripherals such as
chillers, heat exchangers, roughing pumps, cryo pumps, gas panels, RF
generators, DC power supply and robots driven by servo motors in
preparation for shipment and set-up on customer sites. Equipment
restoration activities include both electrical and mechanical works.
( Performs equipment set up and start-up activities on customer site
relative to installation and facility hook up of electrical supply power
line, umbilical cables, control line, gas line, cooling line, CDA line,
pumping forelines and exhaust ductings.
( Interconnect, configure and calibrate all components of the equipment
such as the following: The mainframe, system controller, RF generators,
DC sources, chillers, heat exchangers, vacuum pumps (cryo, turbo and
rough pumps), gas panels, remote plasma sources, microwave generators,
heaters, servo and stepper motors, pick and place robots, pressure
controllers, pneumatic valves, transducers and sensors.
( Attends and presents on meetings with the customer relevant to the
updated status of the project as well as to discuss issues that needs
customer interventions.
( Initiates trouble shooting activities during the warranty period base
on equipment alarm, faults and/or process related issues and recommends
counter measures to eliminate occurrences of the same.
( Projects completed:
150mm Endura (Pre clean, Titanium and Aluminum chambers)
- STMicroelectronics - Catania Italy
Centura (Tungsten and Etch Back chambers)
- STMicroelectronics - Catania Italy
RTP (BPSG centura mainframe)
- STMicroelectronics - Catania Italy
200mm CVD Centura (TEOS/TEPO and Nitride chambers)
- STMicroelectronics - Singapore
3.
Position:
PVD Equipment Shift Engineer
Duration:
Aug 16, 2010 - Jan 7, 2011 (0.4 yr)
Company:
Global Foundries (Singapore)
Company Industry:
Semiconductor / Wafer Fabrication
Location
Industrial Park D Street 2 Singapore 738406
Department:
Equipment Engineering Support
Job Description:
( Organizes a schedule and guide technicians to perform preventive
maintenance and kit change on equipment that are due for maintenance.
( Attends and presents on the daily meeting for the updated status of
the PVD module.
( Leads to initiates trouble shooting, repair and carrying out
corrective maintenance activities involving replacement of
malfunctioning parts such as cryo pump, turbo pump, rough pump, RF
generator, RF match, DC power supply, chiller, heat exchanger, heaters,
throttle valve, mass flow controller, EV valve, nupro valve, pneumatic
cylinder, ISO valve, relays, contactor, breaker, hard disk, controllers,
I/O card, baratron, ion gauge, sensor, servo motor, stepper motor, motor
driver, etc..
( Performs robot teaching and calibration of parts such as throttle
valve, RF generator and MFC.
( Equipment handled are: 300mm AMAT Endura 2, AMAT ISprint Centura,
Novellus Sabre Electroplating and Novellus Inova HCM.
4.
Position:
Equipment Engineer (Shift Leader)
Duration:
Sep 1, 2004 - Aug 12, 2010 (5.9 yrs)
Company:
STMicroelectronics (Singapore)
Company Industry:
Semiconductor / Wafer Fabrication
Location
8 Ang Mo Kio Avenue 12 (Singapore) 569709
Department:
Equipment Engineering Support
Job Description:
( Assigns and supervises group of technicians to perform preventive
maintenance, process kit change and wet cleans.
( Assumes leadership role related on trouble shooting, repair and
carrying out corrective maintenance activities involving replacement of
malfunctioning parts such as cryo pump, turbo pump, rough pump, RF
generator, RF match, DC power supply, chiller, heat exchanger, heaters,
throttle valve, mass flow controller, EV valve, nupro valve, pneumatic
cylinder, ISO valve, relays, contactor, breaker, hard disk, controllers,
I/O card, baratron, ion gauge, sensor, servo motor, stepper motor, motor
driver, etc..
( Performs robot teaching and calibration of parts such as throttle
valve, RF generator and MFC.
( Equipment handled are 200mm ENDURA and CENTURA of the PVD (Physical
Vapor Deposition) section and Applied Material RTP/RTO Centura for the
diffusion section.
5.
Position:
Electrical Supervisor
Duration:
Mar 10, 2004 - Aug 25, 2004 (0.5 yr)
Company:
Somico Steel Mill Corporation (Philippines)
Company Industry:
Manufacturing
Location
Km 49 Indang Rd. Brgy. Inocencio Trece Martires City Cavite 4109
Department:
Electrical Department
Job Description:
( Leads to perform corrective and preventive maintenance involving the
following:
Plant substation with an incoming power of 13.8KV, Transformers, AC and
DC motors and controllers, PLC controllers, Cooling towers, Conveyors,
Recuperator, Furnace, Pumps, Cranes, Hydraulics systems and Pneumatic
systems.
( Supervises operation of electrical control room to ensure smooth
continuous plant operation and provide immediate assistance if
necessary.
( Performs PLC programming to adapt improvements on process flow or
revision on operations.
( Schedules activities for the Electrical Section and leads electricians
in troubleshooting of problems encountered during plant operations.
( Significant Accomplished Projects:
- Leads to carry out de-installation and installation of electrical
equipments involving configurations, rewiring, cable re-routing,
including relocation of control room to support plant expansion.
- Constructed and programmed an automated station and control for
cutting corrugated iron bars that was used temporarily while relocation
and de-installation was done.
6.
Position:
Electrical Engineer/Electrician
Duration:
Apr 14, 2001 - Mar 9, 2004 (2.9 yrs)
Company:
Electrical Private Practitioner
Company Industry:
Construction
Location
San Fernando City, 2500 La Union
Department:
Electrical
Job Description:
( Provides a detailed electrical plan and design proposal for
prospective projects.
( Prepares an estimated bill of materials needed for the projects.
( Plans and organizes a Gantt Chart for construction and installation
activities.
( Performs direct on site supervision to all electrical staff during
construction.
( Initiates roughing-in and wiring installation/termination activities.
( Carries out project testing and commissioning.
7.
Position:
Manufacturing Supervisor
Duration:
Mar 26, 1999 - Apr 13, 2001 (2.1 yrs)
Company:
Texas Instruments Philippines Inc.
Company Industry:
Semiconductor / Wafer Fabrication
Location
Loakan Road Baguio City
Department:
Production Operation
Job Description:
( Plans, organizes, coordinates and manage shift operation through
people, equipment and process.
( Carries out strategies to maintain production parameters related to
cycle time, productivity, yield, cost and safety.
( Performs supervisory task related to disciplining and counseling
subordinates and recommends policy changes or modification if necessary.
8.
Position:
Equipment Engineer
Duration:
Mar 28, 1995 - Mar 25, 1999 (4 yrs)
Company:
Texas Instruments Philippines Inc.
Company Industry:
Semiconductor / Wafer Fabrication
Location
Loakan Road Baguio City
Department:
Engineering Support
Job Description:
( Performs various technical duties associated with PLC, pneumatics,
hydraulics, VFD, servo motor controls and sensors which includes
troubleshooting, repair, maintenance, upgrade, calibration and
conversion of equipment.
( Works on the implementation of changes on the process flow based on
the analysis of the experiment or evaluation conducted that would give a
positive impact on the productivity and quality.
( Area of assignment are Trim and Form, Deflashing / Electroplating and
Marking sections.
( Project completed:
- Redesigned and reprogrammed the previous strip slider at Deflashed
Plating section into a pick and place system that have totally
eliminated crumpled strips.
- Integrated an auto-burner shut-off to protect IC units from being
burnt if an alarm occurred on the burner drive of the marking machine.
- Initiated an installation of turbo initialization on all marking
machine that have improved initialization time for the loader drive.
EDUCATION
Education Level:
Education Field:
Course:
School/University:
Location:
Date:
Technical Education
Technician
Technical Electronics
Don Mariano Marcos Memorial State University
San Fernando, La Union
June 1987 - Oct 1988
Highest Education
Education Level:
Prof'l License(Passed Board/Prof'l License Exam)
Education Field:
Engineering(Electrical/Electronic)
Course:
BS Electrical Engineering
School/University:
Don Mariano Marcos Memorial State University
Location:
San Fernando, La Union
Date:
Oct 1988 - Mar 1994
LICENSES/CERTIFICATIONS
License/
Certification
License/
Certification No.
Date
1.
2.
3.
Registered Electrical
Engineer
Registered
Master Electrician
Electrical Installation and Maintenance NC2
0033298
0015816
Apr 04, 2001
Feb 23, 1994
Sept 30, 2013
SKILLS
Skill
Yrs of Experience
Remarks
1.
Semiconductor Equipment Set-up
7
High confidence level to carry out interconnection, configuration,
calibration, qualification and start-up of sophisticated equipment use
in semiconductor.
2.
PLC
5
Competent in programming, wiring, and troubleshooting
3.
Motor Controls
5
Competent in designing, installation and troubleshooting
4.
Pneumatic and Hydraulic Technology
5
Knowledgeable in troubleshooting, repair and maintenance
5.
Electrical Building Wiring
3
Proficient in Design, Estimate, Installation and Troubleshooting
6.
Computer Literacy
15
Proficient in Microsoft Office applications
TRAININGS/SEMINARS
Date
Topic/Course Title
June 14, 15, 28, 29, June 5
Until June 6, 2013
Mar 22, 2013 - Mar 23, 2013
Sept 26, 2012 - Sept 27, 2012
May 06, 2007 - Jan 27, 2008
July 14, 1999 - July 16, 1999
Instrumentation and Control Servicing NC II
Mechatronics Technologies Corporation
ISSI, E. Virata Hall, Jacinto St., UP, Diliman, Cubao Quezon City
Philippines
Project Estimating and Costing
Institute of Integrated Electrical Engineers of the Philippines
41 Monte de Piedad, Cubao Quezon City Philippines
Managing and Leading Facilities
FMS Associates Asia Pte Ltd
NUSS Suntec City, Singapore
PVD Technology Transfer
STMicroelectronics
Agrate, Italy
Industrial Vacuum Technology
SMC
Texas Instruments Baguio City Philippines
June 19, 1997 - June 21, 1997
Advance Programmable Logic Controller
SMC
Texas Instruments Baguio City Philippines
Apr 10, 1996 - April 12, 1996
Electropneumatic and PLC Application
SMC
Texas Instruments Baguio City Philippines
LANGUAGES SPOKEN
Language
Proficiency Level
(5=Excellent;1=Poor)
1.
Filipino
5
2.
English
4
AVAILABLE DOCUMENTS
Passport
Number:
EB7136900
Expiry Date:
January 10, 2018
Place of Issue:
DFA - La Union
Date of Issue:
January 11, 2013
IELTS
Test Report Form Number:
12PH018624MARR009G
Examination Date:
February 14, 2013
Overall Band Score:
6.5
REFERENCES
Kwak Dong Won
Tay Shi Ka
Deputy Director
QT Technology Pte Ltd
Tel.No.: +659*******
Email: acgwv6@r.postjobfree.com
Relationship: former immediate boss
Human Resource Manager
QT Technology Pte Ltd
Tel.No.: +656*******
Email: acgwv6@r.postjobfree.com
Herminia Flores Department Chairman
Ph. D. College of Technical Education
Don Mariano Marcos Memorial State University
Tel.No.: +639*********
Ma. Cleofe Bello Dean
Ph. D. College of Technical Education
Don Mariano Marcos Memorial State University
Tel.No.: +639*********