Engineer Mechanical

César Marcelo Méndez Sepúlveda

Mechanical Engineer. Universidad de Chile

PROFESSIONAL EXPERIENCE

**-****/**-**** : CODELCO-CHILE, Vicepresidencia de Proyectos. Dirección de Mantenibilidad (DM),

Santiago, Chile. Maintainability and Reliability Specialist Engineer. Ion Exchange Plant Project, for

Chuquicamata Division.

Design of equipment’s breakdown structure in Ion Exchange Plant.

•

05-2013/06-2013 : CODELCO-CHILE, Vicepresidencia de Proyectos. Dirección de Mantenibilidad (DM),

Santiago, Chile. Maintainability and Reliability Specialist Engineer. Molibdenum Corporative Project:

Reliability Centered Maintenance (RCM) developing in software MDM. Analysis of maintenance’s tasks

•

in Molybdenum Corporative Project, in software MDM.

10-2012/04-2013 : CODELCO-CHILE, Vicepresidencia de Proyectos. Dirección de Mantenibilidad (DM),

Santiago, Chile. Maintainability and Reliability Specialist Engineer. Roasting Complex Project, for

Ministro Hales Division:

RCM developing in MDM, jointly with final User and MH Project. Maintenance Task analysis for Roasting

•

Complex Project Plants:

- Roaster

- Effluent Treatment Plant

- Reverse osmosis Plant

- Whitewash Plant

- Cooling system Plant

- Acid Plant Terminal

07-2012/09-2012 : CODELCO-CHILE, Vicepresidencia de Proyectos. Dirección de Mantenibilidad (DM),

Santiago, Chile. Maintainability and Reliability Specialist Engineer. RTII Project.

• Maintainability and Realiability Checklist developing for process equipment in RTII Project.

• Using of PTGIP (AVEVA NET) for Project design reviewing and detection of bad dimensions in design.

01-2012/06-2012 : CODELCO-CHILE, Vicepresidencia de Proyectos. Dirección de Mantenibilidad (DM),

Santiago, Chile. Maintainability and Reliability Specialist Engineer. Chuquicamata Underground

Project (PMCHS).

• Opex maintenance estimating for large Belt conveyors in PMCHS.

06-2010/12-2011 : CODELCO-CHILE, Vicepresidencia de Proyectos. Gerencia de Puesta en Marcha y Mantenibilidad

(GPMM), Santiago, Chile. Maintainability and Reliability Engineer. Chuquicamata Underground

Project (PMCHS).

Maintainability and Reliability Requirements (M&R) identificating for Process equipment in PMCHS.

•

Maintainability and Reliability Checklist developing (M&R) for process equipment in PMCHS, using of

•

Bentley modelling software and AVEVA NET, stronger than Bentley.

RCM/ FMECA análisis for Process equipment: in PMCHS, in MH Project, in Molibdenum Corporative

•

Project TADA Project.

Active participation in meetings, Workshops, and 3d Sessions for reviewing models, with Hatch

•

Company, PMCHS Project and suppliers of PMCHS, Basic Engineering.

Reviewing of Documents made by PMCHS Project, as functional reviewer. Documents like:

•

1. Technical Specifications

2. Drawings

3. 3D model (using Bentley)

Developing and estimating of infrastructure for maintenance of underground mining equipment.

•

Using of simulation software Arena and Queue Theory. Basis Engineering in PMCHS.

Using of MDM software, for PMCHS, RTII, TADA, Basic Engineering . MH, Detailed Engineering.

•

Detailed developing of maintenance tasks in RCM, for Project like PMCHS, RTII, MH, Molybdenum

•

Corporative, TADA.

Maintainability análisis for PMCHS, Basis Engineering.

•

Opex maintenance estimating for PMCHS, Basic Engineering.

•

: Activa Internacional, services for client SONANGOL, Angola, África. Senior Consultant Engineer.

02-2010/05-2010

In this position, main activities were:

Chain supply implementation in SONANGOL LOGISTIC (branch accountable for logistic of products

•

supply, into Angola)

Permanent training of managers in SONANGOL LOGISTIC ( supply chain, software, stock managing,

•

inventory managing, Planning, programming, etc.)

Design of slides for training managers and workers in SONANGOL REFINERY (brach accountable for

•

refinating), specially in industrial maintenance, Maintenance managing, maintenance auditing, etc.)

Workshop designing for managers and workers in SONANGOL DISTRIBUIDORA (brach accountable for

•

distributión of products), specially in maintenance managing and safety issues.

05-2009 / 01-2010 : ERNST & YOUNG LTDA. Santiago. Consultant. Business Risk Consulting Department.

• Inspection on site of heavy duty equipment through all Client’s Divisions and valorization under IFRS

Standard.

11-2008 / 04-2009 : CODELCO-CHILE, División El Teniente, Dirección de Mantenimiento DIMA

(Through GSAPGROUP Ltda) SAP PM Consultant .

• Updating of Maintenance base Plan for Crusher Plants at Teniente DIvision.

• Reviewing of maintenance waybills for equipments, maintenance schedules and materials reports,

to be after included in SAP PM.

• Managing of professionals in charge.

12-2007 /10-2008 : BHP BILLITON, Minera Escondida Ltda. Gerencia de Mantención Mina, Superintendencia

de Talleres, Taller Mantenimiento Preventivo. Ingeniería de Mantenimiento (through GSAPGROUP Ltda.)

SAP PM Consultant.

• Inproving of maintenance schedules for extraction trucks Caterpillar 793B, 793C, 793D

and 797B, Komatsu 830E, designing updated and improved maintenance schedules, to be registered in

SAP PM.

• Reviewing of data and charge in SAP PM.

02-2005 -11-2007 : CODELCO-CHILE, División El Teniente. Superintendencia de Mantenimiento Mina

(SMM). Ingeniería de Mantenimiento (Through CIMM T&S (02/2005-03/2006) and APIRES S.A. (04/2006

–11/2007). Assistant Engineer Jump Fleet).

User of SAP, modules PM and FICO. Analysis of data equipment.

• Modelling of fleets in software MES (Maintenance Engineering System).

Analysis of materials compsumption.

•

Analysis of economical life of assets.

•

KPI estimating.

•

Failure analysis and trends reporting.

•

Improvement of maintenance schedules for jumps, LHD and other heavy duty equipment.

•

Managing of oil samples and laboratory’s reports.

•

Designing of Prof. Protocol for new equipment .

•

• Permanent assistance to Jump Fleet manager, reports, estimating, sheets and searching for

SAP information, etc.

• Developing of special technical reports

.

08-2004 / 01- 2005 : ERNST & YOUNG LTDA., Santiago. Business Advisory Services. Consultant.

• Inspection on site of Assets of CCAF Los Héroes and construction of auxiliary accountant sheet,

based on data recovered.

07-2003 / 11-2003 : ERNST & YOUNG LTDA., Santiago. Business Advisory Services. Consultant.

- Appraisal of Reusing materials for “ Empresa de Ferrocarriles del Estado E.F.E.”

- Inspection of equipment (flowmeters, clorators, gas environment detectors, turbidity meters, pH meters) at

Potable Water Plant and waste water Plant, for Aguas Andinas S.A., Aguas Cordillera S.A., Aguas

Manquehue S.A. and Aguas Los Dominicos S.A.

09- 2002 / 06-2003: VAPOR INDUSTRIAL S.A., Santiago. Jefe de Proyectos. Depto. De Ingeniería.

- Planning, programming and leading construction of differents projects

- User of modelling software Pro-Engineer and Construction Software (VAPOR).

- Strenghtens his expertise in using of Autocad (r14, r2000) and Microsoft Project.

- On December, 2002 obtain prizes “Best Worker” and “Best co-worker”.

05-2002 / 08- 2002: VAPOR INDUSTRIAL S.A., Santiago. Production Supervisor.

- Supervision of process equipment fabrication, pressure tanks, metallic structures for mining and Oil&Gas

Industry.

- Workers in charge. 12 permanently; 60 eventually.

10- 2001 / 05-2002: GAS SEGURO LTDA., Santiago. On site Inspector.

- Maintenance of gas equipment.

11- 2000 / 07- 2001: ARTHUR ANDERSEN, Santiago. Consultant. Depto. Business Consulting

- Inspection on site of heavy duty equipment

09- 1999 / 06- 2000: SOCIEDAD FORESTAL CONCEPCIÓN LTDA.,Concepción. Process Engineer

- Managing Production and Maintenance of 2 chip plants

- Increasing of productivity(BDMT/Hora/HH).

- Decreasing of maintenance costs.

CONOCIMIENTOS COMPUTACIONALES

Software : SAP PM, Aveva Net, Brava, Autocad 12, 13, 14, 2000. Microsoft Office: Excel, pivot tables, macros),

Microsoft Word, Microsoft Power Point, Microsoft Project.

OTROS CURSOS / SEMINARIOS

2012 English online course Rossetta Stone, levels 4 and 5. Scores: 97% y 98%, respectively.

2012 Training in software: “Availability Workbech”, AREMAS, Santiago.

2009 Course: “First Aids”, ACHS, Rancagua.

2008 Internal Training in GSAPGROUP (SAP PM).

2007 Training in “Availability Workbech”, de Isograph, ARMS, Antofagasta.

2006 Curso : “Excel Avanzado”, Dictado por SODEC Capacitación Ltda., Rancagua.

OTHER COURSES

Economy area “Economía”, “Gestión de Operaciones”, “Evaluación de Proyectos”, “Investigación De Operaciones”,

“Contabilidad y Control de Gestión”. Universidad de Chile.

Math area : “Elementos Finitos”, “Resistencia Probabilística de materiales”. Universidad de Chile.

REFERENCIAS

Phd Ramón Frederick, Director Depto. De Ingeniería Mecánica de la FCFM de la Universidad de Chile. F: 02-9784448.

Sergio Adauy D., Ingeniero Civil Mecánico, Managing Director, GSAPGROUP Ltda. F: 9-2210232

Juan Méndez G., Jefe de Unidad de Ingeniería de Mantenimiento Minas, División El Teniente, Codelco Chile. F: 72-296927.

Leonardo Vergara Marchant, Jefe Estudios & Ingeniería, Unidad Ingeniería, Superintendencia de Mantenimiento Minas,

División El Teniente, Codelco Chile. F: 72-296978.

Carlos Araya M., Jefe de Flota Jumbos, Codelco Chile, División El Teniente, Codelco. F: 72-296965.

Mauricio Gajardo R., Ingeniero Abastecimiento, División El Teniente, Codelco Chile, F: 9-89125899.

Mauricio González G. Jefe de Mantenibilidad y Confiabilidad, DM, GFIP, VP Codelco Chile, fono: 22-2506666.

STRENGHTS

• Languages:

English: Reading and writing, advanced level. Speaking,medium- advanced level.

Portuguese: Reading and writing, advanced level. Speaking, medium- advanced level

• Goals focussed

• Permanent searching of optimizing process. Always looking for application of new technologies to decrease costs,

process time and increase safety.

• Excelentes relaciones interpersonales. Promotor del trabajo en equipo y de los logros diarios en su entorno de trabajo.

PRINCIPALES AREAS DE INTERÉS

Maintenance Managing, Maintenance Planning, Assets managing.

•

Project and Plants Modelling.

•

Reliability, RCM, FMECA, RCA, failure mode Analysis..

•

Process Optimizing

•

Project Leadership

•

Human resource and training. Equipment supervision.

•

GENERAL INFORMATION

NAME : César Marcelo Méndez Sepúlveda.

NACIONALITY : Chilean

BORN DATE : november 12, 1974

MARITAL STATUS : Single

DRIVE LICENCE : B class

PHONE (movil phone) : 7-4304353

EMAIL ADDRESS : **********@*****.***

ACADEMIC BACKGROUND

October 1998 Obtains the title of Mechanical Engineer, with distinction.

1998 : Developes his Thesis about natural convection, maximum score.

1992-1998 : Studies Mechanical Engineering at Universidad de Chile.

1988-1991 : Secondary at Liceo A Nº 9 de Aplicación. Santiago.

1980-1987 : Primary at School D Nº476, San Joaquín, Santiago.

DEGREES

BSC in Engineering Sciences, Mechanic mention, FCFM, Universidad de Chile.

•

Mechanical Engineer, FCFM, Universidad de Chile

•

Income Expectation : USD 9000 gross/month.

César M. Méndez Sepúlveda, 12.642.742-5

Contact this candidate