JINFENG (VICTOR) MENG

*** ********** *****, ***. * Amherst, Massachusetts, 01002

508-***-**** acgoie@r.postjobfree.com

MECHANICAL ENGINEER

* ***** ********** ****** ********** focusing on mechanical and fluid system with a master degree in mechanical

engineering. Proven ability in managing all phases of the research and development process from the initial calculation

and concept design, to the mechanical design and simulation in Solidworks, and to the later test and validation.

Proficiency in generating draft, specifications, tolerance and dimensioning for the mechanical part, familiar with

measurement and data acquisition process and good at developing testing procedure. Possessed strong hands -on skills

and great troubleshooting ability using professional knowledge. Involved in several in-depth undergraduate and graduate

projects, assisted or lead project developments from conceptualizing new ideas through design, prototypes, testing,

analyses and validation. Managed an experiment with a budget of $8,000.

Mechanical Design/ Solidworks Simulation/ FEA DOE/ DFMA

Research/ Development Project Management Team Leadership / Motivation

Measurement and Calibration Data Acquisition / Analysis

Experimental/ hands-on Skills Manufacture Lean Green Belt

MULTI-SCALE HEAT TRANSFER LABORATORY (WORCESTER POLYTECHNIC INSTITUTE) Worcester, MA

1/2013 to 5/2014

The Multi-Scale Heat Transfer Laboratory focuses on theoretical, numerical and experimental studies in heat transfer and mass

transport enhancement in micro, meso and nano scales, in single -phase and two-phase flows, in the presence and absence of gravity.

Research Assistant

Assisted in designing mechanical components and thermal system app roaching the optimal mechanical and thermal

performance in theoretical and experimental ways. Involved several in-depth graduate projects: convectional heat

transfer experiment, fluid system control with EHD pump, hydropower collection for later use . Successfully managed an

individual project from the initial technical calculation and concept design, to the 3D Solidworks design of the

components, manufacture and assembly, to prototype validation with little supervision.

Achievements:

Accomplished an individual graduate research studying the performance of an Electrohydrodynamics(EHD) pumps,

managed all phases of the design process for a multitude of components, housing, fittings and assemblies, including

drafting, dimensioning, tolerancing and prototyping.

Assisted in designing a new EHD pump based on the previous design by simplifying its geometric al structure,

manufacturability and assembly, reduced the cost for the prototype, and addressed the previous electrical

connection using the jumper and electrical feed-through.

Developed the assembly and testing procedures for the EHD pump to validate its functionality.

Generated the 3D design for the individual components, and utilized Solidworks assemblies as guidance for the

prototype.

Collaborated in executing a convection heat transfer experiment, tested the thermal performance of different fins at

different flow rates, utilized Labview to record the data from the measurement and used Matlab to analyze the data,

finally figured out the fins that achieved the optimal convecti onal heat transfer at the corresponding flow rate.

STATE KEY LABORATORY OF CLEAN ENERGY UTILIZATION (NORTH CHINA ELECTRIC POWER UNIVERSITY)

Beijing, China 3/2010 to 8/2011

Lab Assistant

Assisted in designing several of advanced mechanical and fluid systems to improve the utilization of the energy.

Involved in projects designing heat sink with military-level heat load using the self-oscillating heat pipe and assisted in

applying the oscillating heat pipe into the solar energy collection. Lead a team of seven, participated in National Student

Social Practice and Science Contest on Energy and Emission Reduction, brought about a new portable device with

cooling and heating functions using the solar energy.

Resume

JINFENG (VICTOR) MENG Page 2 acgoie@r.postjobfree.com

Achievements:

Lead a team of seven, invented a brand-new portable model using a semiconductor refrigeration slice with a heating

function, oversaw the entire process from concept design, initial calculations, material and key components selection,

electrical circuit design, prototyping, testing and troubleshooting.

Creatively introduced a solar panel and a rechargeable battery as the power for the refrigeration slice, realized free

external electricity consumptions, employed a manual switch which co uld change the direction of the current applied

to the semiconductor and thus generated an extra heating function, enriched the application and brought extra

benefits for this invention.

Designed the invention lightweight with a compact size to facilitated its embedment into the clothing, applied a

patent for this device and awarded “ Creative Design Scholarship” from 3M.

Designed a heat sink for high heat load electronics using a self-oscillating heat pipe. Since the heat load exceeded

the capacity of the previous heat sink, improved the system by changing the dimensions and shapes, and compared

different settings with mathematical calculations and Solidworks thermal simulations. Finally arrived at an optimal

point where the most heat could be dissipated and the design met requirement from the client.

EDUCATION

Master of Science in Mechanical Engineering, 05/2014

W orcester Polytechnic Institute, Worcester, Massachusetts

Bachelor of Science in Power Plant and Thermal Engineering, 05/2012

North China Electric Power University, Beijing, China

Related Courses

Heat Transfer, Advanced Fluid Mechanics, Engineering Experiment, Analytical Mathematics, Numerical Mathematic,

Fiber Optics, Finite Element Analysis, Renewable Energy, CFD, Thermodynamics and Stati stics, Turbomachinery

CERTIFICATION

Lean Green Belt Certification

Institute of Industries Engineers

3D CAD Software Engineer

Information of National Manufacturing Industry Training Center China

AFFILIATIONS

Institute of Industries Engineers

COMPUTER SKILLS

Solidworks, CAD, Microsoft Office Suite, Labview, Matlab, R

PUBLICATIONS

Patent (China): Jinfeng Meng, Xing Yu, etc. A Refrigeration Device with Heating Function. App. NO 200820115302.5

Jinfeng Meng, Jamal. Yagoobi/ Control of Single Phase and Two Phase Flow with EHD Conduction Mechanism

LANGUAGES

English, Chinese

Resume

Contact this candidate