Maintenance High School

DENNIS J. QUINN ***

FOX HILL ROAD

201-***-**** - cell

DENVILLE NJ 07834 *********@*******.***

973-***-****- home

EMPLOYMENT:

***-*/** ***** ***., Randolph, NJ

. Disassemble, clean and reassemble various types of rotating blade mixing machines for

the Chemical and

. Food Industry. Assess amount and type of repairs needed to bring unit up to specs.

. Determine parts to be replaced or repaired by use of micrometers,calipers,levels,magnifluxing for cracks and

excessive wear along with other measuring devices.

. Processes and skills to include, but not limited to, Arc, Mig,and Tig Welding of steel,

stainless steel, and

. aluminum, drilling and taping of threads, fabrication, grinding and Pharmacutical

polishing, reading of

mechanical drawings and prints .

. Setup machines in order to test all mechanical, hydraulic,electrical systems for proper

fit and function.

Estes Express Lines, Pinebrook, NJ

6/11- 4/14

Mechanic Class-B Trailer

. Perform both A and B type Maintenance inspections and repairs on Tractor- Trailer

equipment and shop facility.

. Inspections to include power train, frame, body, suspension, tires,ABS and non ABS air

brake systems, electrical,

powered cargo handling systems and safety equipment in accordance with all DOT rules and regulatio

. Duties to include, but not limited to: Grease,adjust or replace brake system parts.

Replace or repair of worn

or broken suspension. Replace tires. Weld frames and supports. Repair trailer interior

such as scuff liners,

threshold plates.Repairs to rollup and swing out doors. Diagnosis of electrical system for

open circuits, short to

ground. and lights. Tractor maintenance including oil change, grease, all filters, brakes,

tires, body, suspension,

frame and safety equipment.

. Facilities maintenance for the fuel pumping systems, air hoses, signage, storage, and

general house keeping.

. Maintenance and repair to include all shop service vehicles and emergency equipment.

Maintenance Mechanic / Welder

8/10 – 10/10 3M

Whippany, NJ

Short-term Contract position required the welding and fabrication of metal bracing,

bracketing, guards,

metal hoods for air handling systems which were integral to the manufacturing

processes and plant facility

using Mechanical drawings and prints provided by manufacturer and department

supervisor.

Welded various thicknesses [14ga. & 16 ga.] of mild steel using

MIG welding processes.

Acetylene and Plasma cutting equipment experience.

Maintenance Mechanic / Welder

6/02 - 3/09 ELEMENTIS SPECIALTIES

Jersey City, NJ

Installed new and replacement capital equipment for chemical production /

manufacturing facility.

Fabricated loading platforms, metal decks, S/S structures integral to the

manufacturing facility per custom

plant facility requirements with specifications and drawings from Engineering

department.

Welded various thicknesses [16 ga. to 1/2"] of mild steel and stainless steel using Arc

and Tig processes.

Eperience with Acetylene cutting equipment

Fabricated and repaired S/S lined rotating gringing mills with water cooling jackets

able to hold 85lbs.water pressure.

Modified and repaired large capacity product transfer tanks, tank covers and hardware.

Jobs accomplished using fitting skills for Black, S/S and PVC Pipe for thread, weld

and flanged type assemblies. .

. Maintain pumps, filters, heat exchangers and copper lines for Closed circuit Chilled

water cooling systems

and facilities plumbing repair up to 3" diameter.

. Type of equipment such as large capacity Attritor Rotating Media Grinding Mills.

High capacity Vari-speed

driven and direct drive mixers. .

Troubleshoot, identify and resolve Light electrical and mechanical problems related to

inoperable equipment.

.. Repair, Rebuild and Installation of Sandpiper Air Powered Diaphragm Product transfer

pumps, Blackmere

rotary vane positive displacement pumps, Positive displacement, mechanical seal,

impeller type, hot caustic

cleaning solution pumps for Renzman SKM 1,100 LTR. tank cleaning machines using

factory blue prints and

schematics for the disassembly, parts ordering, retrofit and reassembly.

. Maintain and repair steam boiler, lines,valves, condensate tanks, pumps and traps for

production and facility.

. Modify and repair S/S lined rotating mills with water cooling jackets able to hold

85lbs. water pressure.

. Modify and repair large capicity product transfer tanks, tank covers and hardware.

Maintenance Mechanic / Welder

8/92 – 11/01 DYE SPECIALTIES

Jersey City, NJ

Installed new and replacement capital equipment for chemical production /

manufacturing facility.

Welded Schedule 40 & 80 various sized custom lengths of S/S & mild steel pipe.

Dismantled existing 9,000 gal. production vessels, took measurements then

fabricated a smaller custom 6,000 gal.process salt bath tanks.

Fabricated: 12ft x 15ft steel chemical containment room, product transfer lines

throughout production areas, heating boxes which housed 2" s/s heating

coils using drawings and prints from plant Engineer.

Fabricated, installed and welded in-house designed 24" square x 1/8" thick, 316 S/S

equipment liner panels.

Participated on company First Response Hazmat team as certified and trained by

Jersey City Fire Dept.

Installed oil fed 250hp boiler,pipes,pumps, valves,controles,platforms, safety rails,

decks, and most types of steam tracing and insullation.

.

Maintenance Mechanic / Welder

1/89 – 1/92 BASF CORPORATION

Kearny, NJ

Welded and fabricated 1/2" to 3" diameter Carbon Steel and S/S chemical product tank

lines

Fabricated and welded structural support systems including platforms, safety railings,

staircases for the chemical production facility

Fabrication of Black and S/S product loading and transfer lines along with various

pumps, valves, filters,

support brackets, steam tracing and out door rated insulation..

EDUCATION:

Clifton High School College Preparatory Clifton, NJ

NY Institute of Technology No Degree – moved out of state New York,

NY

CERTIFICATIONS:

Arc Welding – D1.1- G-3,G-4 American Welding Society

2003

Tig Welding Bergen Tech High School Adult Class

1999-2005

Trained, Tested and Certified Forklift Operator for 3M Corp.

2010

Contact this candidate