Constantine Constantinide

** ******** ******

Yonkers, NY 10704 USA

Phone: 1-347-***-****

acgjpb@r.postjobfree.com

Zero International Contact: David Crocco Vice-president 914-***-****

EMPLOYMENT HISTORY

From October the 2nd 1995

To Present: Chief of Research and

Development Department at Zero International Inc.

Bronx, New York.

ACTIVITIES AS ENGINEER AT ZERO INTERNATIONAL

As engineer at Zero International I have done tests and analyses for the

inorganic raw materials and finished products. I have done welding tests

and analyses for the metals used by the company mainly for the steel,

stainless steel, aluminum and bronze. Also I have done tensile strength

tests, shear tests, hardness (Rockwell) tests and composition tests for all

the metals including steel and stainless steel. I have developed many new

formulas of fireproofing composites (known also as intumescent materials)

that have been produced and sold bringing millions of dollars in profit to

the company. Also I have developed fireproof paints and caulking,

phosphorescent rubber and epoxy composites, antislip thresholds, composites

for special uses (fiber glass/epoxy, carbon fiber, Kevlar, polyurethane,

bulletproofing and fireproofing for navy and army) and many other

improvements (too many to enumerate) who had raised the profit of the

company by tens of millions. I have scaled up from pilot size to production

different production lines resolving many complicated engineering problems.

I have developed many new soundproof composite products from recycled,

environmentally friendly, renewable and biodegradable materials. I have

developed new polymers and plastic materials from biodegradable plant

extracted oils.

I have solved welding problems for nonferrous alloys and ferrous alloys. I

have built fixed and maintained industrial robots (Arduino smart stamps

based).

From October the 1st 1994

To October the 2nd 1995: I was transferred from the

Department of

Inorganic

Chemistry to the Department of the Inorganic Chemical

Technology.

From November 30th 1990

to October the 1st 1994: I was nominated as Associated

Assistant Professor at the Polytechnic

University of Bucharest, Faculty of Industrial

Chemistry, Department of

Inorganic

Chemistry

From October the 15th 1990

to November the 30th 1990 : I was employed as Scientific

Researcher at the Center of Research,

Technological

Engineering and Projects for Precious and Radioactive

Metals

(C.C.I.T.P.M.R.R.) at the Center of Nuclear and Applied Physics

Magurele,

Bucharest, Romania.

From October the 15th 1990

to November the 30th 1990 : I was employed as Scientific

Researcher at the Center of Research,

Technological

Engineering and Projects for Precious and Radioactive

Metals

(C.C.I.T.P.M.R.R.) at the Center of Nuclear and Applied Physics

Magurele,

Bucharest, Romania

From January the 15th 1990 to

October the 15th 1990: I was working as specialist

engineer at the Nuclear Power Plant from

Cernavoda in cooperation with C.A.N.D.U.-A.E.C.L.

Canada in the Quality Test Laboratory for the

Processing of Radiographic Films.

From October the 1st 1988

to January 15th 1990 : I was employed as

engineer at the Center of Research,

Technological Engineering and Projects for Precious and Radioactive

Metals

(C.C.I.T.P.M.R.R.) at the Center of Nuclear and Applied Physics

Magurele,

Bucharest, Romania as a specialist in hydrometallurgy for

rare,

precious and radioactive metals (gold, cooper, uranium, thorium,

Nickel,

actinides and lanthanides).

Graduated as

P.E. chemical engineer with the papers:

"Synergetic

effects of a mix of dibutylether and tri-n-butyl phosphate in

extraction

and purification of uranium radio nuclides for nuclear uses.

PART TIME JOBS

From August the 1st 1982 to Chemical technician at the Center of

Research,

October the 1st 1888 Technological Engineering and

Projects for Precious and Radioactive

Metals

(C.C.I.T.P.M.R.R.) at the Center of Nuclear and Applied Physics

Magurele,

Bucharest, Romania Department of hydrometallurgy for rare,

precious and

radioactive metals

From September the 1st 1997

To October the 15th 2000 : Computer Network Engineer at

Domino's Pizza in New Rochelle evening

shifts.

From October the 15th 2000

To September the 11th 2001 Manager Assistant at Domino's Pizza

in Yonkers evening shifts.

From September the 15th to

Present: Technical Consultant at

Romanian Voice TV Station WNY 25 evening

shifts.

EDUCATION

PROFESSIONAL INTERNSHIPS: 1981-1982 Policolor Chemical Plant:

-Department

of plastic and rubber injection.

-Department

of automotive antifreeze production .

-Department

of white paint production.

1982-1983

Pharmaceutical Plant of Bucharest (U.M.B.)

-Department

of Vitamin C production.

National

Research Institute for Cosmetics, Medicine and Drugs

-Department

of Applied Research

-Pilot Plant

for drug synthesis.

COLLEGE: Polytechnic University of

Bucharest, Faculty of Chemical Technology,

Department

of Technological Organic Chemistry for Engineers.

GRADUATION: 1988 Final Examination Papers:

"Tri-n-

butyl phosphate synthesis and its uses as plasticizer, uranium

extraction

and purification from acid solutions."

Mark 100.00

Diploma Series F No. 3849/174 from 09/26/1988.

SCIENTIFIC RESEARCHER

CERTIFICATION: At the date of November 15th

1990 I have sustained the papers:

"Purifying and

separation of tantalum and niobium with liquid-liquid

Extraction"

when I have been nominated as Scientific Researcher.

Ph.D. WORKS: From January 10th 1992 I

was nominated to sustain the papers:

"Mixed Metal

Oxides with controlled and semiconductor properties"

PART TIME JOBS

From August the 1st 1982 to Chemical technician at the Center of

Research,

October the 1st 1888 Technological Engineering and

Projects for Precious and Radioactive

Metals

(C.C.I.T.P.M.R.R.) at the Center of Nuclear and Applied Physics

Magurele,

Bucharest, Romania Department of hydrometallurgy for rare,

precious and

radioactive metals

From September the 1st 1997

To October the 15th 2000 : Computer Network Engineer at

Domino's Pizza in New Rochelle evening

shifts.

From October the 15th 2000

To September the 11th 2001 Manager Assistant at Domino's Pizza

in Yonkers evening shifts.

From September the 15th to

Present: Technical Consultant at

Romanian Voice TV Station WNY 25 evening

shifts.

LANGUAGES KNOWN: English - spoken, read, written,

Romanian -

spoken, read, written

Spanish -

spoken, read,

French -

spoken, read

German - spoken

DRIVING LICENSE: From September 1st 1995 driving

license class E,

clean (no

points taken or accidents in the last 10 years).

RELIGION: Christian,

CITIZENSHIP: American (SUA) and European

(Romania).

PRISON CONVICTIONS: Without,

FAMILY STATUS: Single and without children.

MILITARY SERVICE: Second lieutenant (mark 95) specialist

in Mass Destroying Weapons

detection and decontamination (radiological,

chemical and biological). Specialist in

research and development of special energetic

materials and energetic devices.

ADRESS: 32 Whittier Avenue,

Yonkers, New York, N.Y. 10704 USA

GENDER: Male

RACE: White (Caucasian)

SHORT PRESENTATION OF PUBLISHED PAPERS WRITTEN BY CONSTANTINE

CONSTANTINIDIS AS PROFESSOR ASISSTANT

1) Article sent for publishing at chemical newspaper "Revista de Chimie":

Two parts: "Tri-n-butyl phosphate, his new method of synthesis and new

uses" (part I and II)

Authors: Professor Ph.D. Angela Lupu

Professor assistant Constantinidis Constantine

In this article is presented a new way of synthesis of tri-n-butyl

phosphate from phosphor oxitrichloride

and butyric alcohol under high vacuum and the adsorption of the

hydrochloric acid on zeolites.

Also is presented the uses of this chemical as extraction agent for

purifying of the uranium for nuclear

uses and like plasticizer for some rubbers and plastic materials

(exemplified by experimental data).

2) "Persorbtion of organic ligands on the zeolite ZSM-5 loaded with cooper

cations."

Paper presented at the National Conference of Chemistry and Chemical

Enginery, Polytechnic University

of Bucharest October 30th 1993.

3)"Structural characterization by RES spectroscopy for the complex

inclusion of zeolite Cu-ZSM-5 with

Ammonia and pyridine"

Paper presented at the Scientific Jubilee Conference: "75 years of

Romanian Chemistry Education at Alma

Mater Napocensis" Cluj-Napoca May 21th 1994.

4)" Inclusion complexes in zeolites Cu-ZSM-5 with nitride organic

compounds"

Paper presented at the Conference: "Progress in Chemistry and Chemical

Technology" at the Technical

University "Gheorghe Asachi", Faculty of Industrial Chemistry Iasi

October 29th 1994.

5)"Synthesis of esters of fatty acids with fatty alcohols under the

catalisation of ion exchange resins and their

uses in cosmetic products"

Paper presented at the National Conference of Chemistry and Chemical

Enginery, Faculty of Chemical

Enginery, Polytechnic University of Bucharest November 30th 1991.

In those papers is presented the adsorption of cooper cations in zeolite

ZSM-5 complex with organic

compounds and the catalytic effect of ion exchange resins in the

synthesis of fatty esters (with their uses in

Cosmetic industry i.e. lipsticks and powders).

Is studied also the catalytic effect of those complex combinations in

different cases.

These papers are written in association and collaboration of Professor

Ph.D. Batca Agneta, Professor Ph.D.

and Lecturer Ph.D. Marius Radulescu.

RESEARCH PAPERS WRITTEN BY CONSTANTINIDIS CONSTANTINE AS SCIENTIFIC

RESEARCHER

1)"Technologic researches in recovering and purification of uranium from

Gradiste de Munte ores."

Inventory C481 from June 1988.

2)" Researches for complex valorizing of the poor ores in rare and

radioactive metals"

InventoryC505 from December 1988.

3)"Technologic Researches for the final parameters for uranium recovering

from Gradiste de Munte ores"

Inventory C473 from December 1988 symbol PD-4/1988.

4) "Researches for establishing of the possibilities of recovering of

uranium from poor ores and sterile from

Avram Iancu, Dobrei and Ciudanovita"

Inventory C509 from June 1989.

5)"Researches for establishing of the possibilities of recovering of

uranium from poor ores and sterile from

Rapsag, Ilisova and Arieseni"

Inventory C504from December 1989.

In all those research papers is presented the process of dissolving

metals present in ores in strong mineral

acids (sulphuric acid in the majority of cases) in the presence or absence

of sulphuric bacteria and separation and purification on ion exchange

resins and in the final by liquid-liquid extraction.

6)"Synergetic effects of di-butyl-ether with tri-n-butyl phosphate in

uranium extraction from water solutions."

7)"Analysis of causes of the apparition of the third phase in the

extraction of dirty impure uranyl nitrate with tri-

N-butyl phosphate in kerosene."

In those research papers is presented the experimental data about uranyl

nitrate liquid-liquid extraction and the inconvenient of the existence of

silica acid in water phase.

PATENTS WRITTEN BY CONSTANTINIDIS CONSTANTINE AS PROFESSOR ASISSTANT

Patent No. C/1613 from October 5th 1994 Romania.

"New fabrication procedure of obtaining of active substances used in the

detection of alcohol in human breath."

In this patent is described the way to obtain a new mix of active

substances for detection of vapors of the

ethylic alcohol in human Breath (a mix of silica, potassium dichromate,

sulfuric acid, sulfamic acid and small amounts of potassium triiodide

complex and sodium metaarseniate).

Also is presented the mathematic correlation between the ethylic

alcohol concentration in blood and and its concentration in the human

breath.

The patent is written in collaboration with Professor Ph.D. Filipescu

Laurentiu

Ph.D. DISSERTATION IN CHEMICAL ENGINEERY

From January 10th 1992 I was nominated to sustain the paper work:

"Mixed metal oxides with controlled properties"

This Ph.D. thesis is written under the direct coordination of Professor

Ph.D. Eugen Pincovschi Chief of the Department of Technologic Inorganic

Chemistry and Environmental Protection from Polytechnic University of

Bucharest.

In this scientific paper is presented some different titanates (like barium

titanates for oxygen sensors or stannous titanates for thin flexible solar

panels) compounds and other spinelic compounds with semiconductor,

magnetic, piezoelectric, and dielectric properties (named also MOS

systems).

Also are presented different ferrites (mixed oxides of iron and other

metals) and their uses in obtaining of

magnetic fluids.

IMPROVEMENTS AND INNOVATIONS DONE BY CONSTANTINE CONSTANTINIDIS AS CHIEF OF

RESEARCH AND DEVELOPMENT AT ZERO INTERNATIONAL BRONX NEW YORK

As head of research and development I have developed many new formulas of

fireproofing composites (known also as intumescent materials) that have

been produced and sold bringing millions of dollars in profit to the

company. Also I have developed fireproof paints and caulking,

phosphorescent rubber and epoxy composites, antislip thresholds, epoxy

composites for special uses (fiber glass/epoxy, carbon fiber, Kevlar,

polyurethane, bulletproofing and fireproofing for navy and army) and many

other improvements (too many to enumerate) who had raised the profit of the

company by tens of millions. I have scaled up from pilot size to production

different production lines resolving many complicated engineering problems.

PAPERS AND PATENTS IN WORK

I have in work a number of papers and patents as follows:

1)"Hydroelectric system for amortizing in automotives"

This paper is proposed for a patent and is based on the studies of Taylor

rings in high viscosity liquids particularly the viscosity modification of

liquid crystals and ferromagnetic fluids under electromagnetic fields.

This paper is written in collaboration with Professor Ph.D. Balan Corneliu

from the Department of Hydrodynamics from the Faculty of Mechanics,

Polytechnic University of Bucharest. The system is proposed of use in

improving of canon stability on the target in military applications.

2) "Holographic filters for surveying the aerial targets"

This paper is proposed for a patent and is based on the sensitizing

effects of the potassium dichromate on the thick layer photographic

gelatins and their expose to LASER systems in order to obtain a holographic

Image. This image is used to obtain a digital filter who coupled with a CCD-

chip is used for aerial targeting in self guided missiles.

The paper is written in collaboration with Lecturer Ph.D. Cojoc Daniel from

the Department of Fine Mechanics Polytechnic University of Bucharest.

3)"Pulses Chemical LASER system"

This paper is proposed for a patent and is based on the chemical

reaction between deuterium and Fluor in the presence of xenon octofluoride

and small amounts of oxygen. By electric igniting of this chemical mix is

possible to obtain a LASER pulse of high energy (about 2 GW per pulse

depending on reaction chamber size)

Also this LASER can be used to start a fusion reaction in a mix lithium6

deuterium, tritium and small amounts of mercury isotope (known as "Red

Mercury").

OTHER COLLABORATIONS WITH MY COLEAGUES

I have collaborated in other colleagues works (I am a hands on engineer)

setting up test rigs and experiments in environmental protection

(electronic circuitry and sensors for the detection of pollutants in rivers

waters), artificial synthetic bones for dental implants, refractory mixes

for fireproof materials and precious metal casting, bulletproof and

fireproof composite materials, precious metals smelting and purification,

special undetectable explosives, solid rocket fuels and special radioactive

materials (some of them are still secret).

OTHER SKILLS

I have other skills as building and fixing power electrical circuits,

building small electronic devices, industrial interfaces, industrial robots

(mostly ARDUINO based) and industrial automation. I am a good welding

engineer, skilled in nonferrous and ferrous alloys welding with stick, MIG

and TIG technologies (Lincoln and Miller Millermatic 350P welding

machines).I am a skilled electronic engineer that can build and fix many

different electronics and robotic equipments (industrial and household) I

can build maintain, repair and operate climateric chambers, furnaces,

ovens, kilns, presses, centrifuges, reactors, pumps, vacuum pumps, filters,

heat exchangers, mixers, crushers, plastic injectors, extruders (for PVC

and polyethylene) and other chemical installations. I know how to weld

iron and nonferrous metals, braze and solder. I have knowledge in sanitary

installations, air conditioning, heating, construction, carpentry and

masonry. I have knowledge of optical systems, microscopy, photographic

microscopy, industrial photography, photographic cameras, photo chemicals,

audio/video systems and cameras, radiation detectors, sensors, radioscopy,

nondestructive structural integrity tests (like ultrasounds, penetrative

fluids and magnetic fluids). I can build, repair, upgrade, operate and

maintain computers both IBM and Apple. I can install, backup and uninstall

operating systems and programs like Windows OS X (tiger, leopard, etc.)

Microsoft Office, Nero, Adobe Photoshop, DVD FAB Platinum. I can install,

operate, repair and maintain peripherals like LASER printers, color

printers, plotters, digital cameras, scanners, routers etc. I can set small

local networks and internet connections (both wired and wireless). I can

operate professional camcorders, install and operate complex lighting

systems and edit and create video presentations.

Contact this candidate