SHAUN J GARZA
LOLITA, TX *****
acgjck@r.postjobfree.com
Career Objectives
I am seeking a Management, Supervisor position or safety with a company
that has advancement potential and offers a benefit package.
Summary of Qualifications
Approximately ten years of scaffolding experience, starting at an entry
level position and with hard work and dedication have advanced to a
position in supervision. I also have 172 hours of OSHA safety training
and am committed to working safe and insure safety of coworkers as well.
Have experience putting together bid packages from small single bay
scaffolds up to large jobs such as bidding outages or work throughout
entire facilities.
Work History
Jul1, 2014-current
Kelly Services/Dow Chemical
Scaffold & Insulation Auditor/QC
Responsible for maintaining accurate count of scaffolds on site,
ensuring Dow is not being over charged for E&D or rental,
Auditing scaffolds in field when erected to insure the highest quality
of work and safety for employees who will be accessing scaffolds.
Communicate with scaffold contractors managers do clarify any
discrepancies as far as billing, safety issues, and QC reports. Creating
and maintaining reports for construction manager to be able to track
cost of scaffolding also to communicate between unit coordinators and
contractors on removing scaffolds to cut rental cost and to assure
efficient use of contractors to avoid overages. Provide scaffold
estimates to construction managers to help with project take offs.
Follow all company policies and procedures hold meetings with
contractors to overview compliance issues within their company and
maintain a professional relationship with contractors by setting
exceptions and working together to better ourselves as a whole.
Nov12, 2012-Jun20, 2014
Basic Industries LTD.
Scaffold Supervisor
Walk down job; attend pre outage meeting to determine what the needs of
client are. Order all materials, rental equipment, and safety supplies
that would be needed to complete job. Calculate manpower needs and
develop schedule starting from mobilization of job through
demobilization. Ensure that all employees brought onto site are properly
DOW RESTRICTED - For internal use only
trained in erection of scaffold as well as equipment that might be used.
Maintain all Jobsite records: JSA/JHA, Inspection Records, PO Logs,
Safety Meetings with Topics, and Monthly On Site Training. Designate
lead men to run crews and assure that all scaffolds are erected per OSHA
regulation. Conduct daily safety meeting; fill out all JSA/JHA for
jobsite ensure that productivity was accomplished without any safety
issues, daily reports to plant management on status of job completion.
Assuring that all payroll is processed on time so that there is no
issues with employees checks. Help upper management with cost control to
maintain profit margins without jeopardizing safety. Participate
actively in the Contracting and Termination of employees on my jobsite;
follow company policies with disciplinary actions as well as all safety
compliance issues. Travel to multiple locations and provide clients with
on the spot pricing for emergency jobs. Maintain a good relationship
with clients for all my jobsites.
Oct4, 2012- Nov 9, 2012
Cooper Nuclear- Brownville, Nebraska
Scaffold Foreman
Take direction from General foreman and relay to a small crew of six
people, design and figure out materials that will be needed to complete
job. Also ensure that all scaffolds are erected per OSHA regulations and
crew and I follow all safety rules. Sometimes am expected to take care
of job packets on days that foreman is off.
Apr 9, 2012- Sept1, 2012
Zachry Nuclear- Turkey Point Homestead, Florida
Scaffold Builder Foreman
Take direction from general foreman and relay to a small crew of eight
people, design and figure out materials that will be needed to complete
job. Also ensure that all scaffolds are erected per OSHA regulations and
crew and I follow all safety rules. Sometimes am expected to take care
of job packets on days that General foreman is off.
Feb 21, 2012 - Apr 6, 2012
Dz Atlantic- North Anna, Virginia
Scaffold Builder Foreman Dominion Power
Take direction from General foreman and relay to a small crew of six
people, design and figure out materials that will be needed to complete
job. Also ensure that all scaffolds are erected per OSHA regulations and
crew and I follow all safety rules.
Jun 12, 2011 - Nov 1, 2011
CH2MHILL - Anchorage, Alaska
Scaffold Tech Lead
Oversee a small eight man crew also if needed help erect and dismantle
scaffolding, insure that all scaffolds were erected per OSHA
regulations, provide safety information to my crew per job specifics by
filling out all JSA/JHA, also immediately correct any safety violations
as needed or report to supervisor if necessary
Apr 10, 2011 - May 10, 2011
Dz Atlantic - Surry, Virginia
Scaffold Foreman Dominion Power
Take direction from General foreman and relay to a small crew of six
people, design and figure out materials that will be needed to complete
job. Also ensure that all scaffolds are erected per OSHA regulations and
crew and I follow all safety rules. Measure materials or distances,
using square, measuring tape, or rule to lay out work. Study blueprints
and diagrams to determine dimensions of structure or form to be
constructed. Cut or saw boards, timbers, or plywood to required size,
using handsaw, power saw, or woodworking machine. Mark cutting lines on
materials, using pencil and scriber. Anchor and brace forms and other
structures in place, using nails, bolts, anchor rods, steel cables,
planks, wedges, and timbers. Erect forms, framework, scaffolds, hoists,
roof supports, or chutes, using hand tools, plumb rule, and level.
Assemble and fasten material together to construct wood or metal
framework of structure, using bolts, nails, or screws. Bore bolt holes
in timber, masonry or concrete walls, using power drill.
Feb 28, 2011 - Apr 04, 2011
Bartlett - Brownville, Nebraska
Journeyman Scaffold Builder
Cooper Nuclear Station
Supervise a six man crew. Measure materials or distances, using square,
measuring tape, or rule to lay out work. Study blueprints and diagrams
to determine dimensions of structure or form to be constructed. Cut or
saw boards, timbers, or plywood to required size, using handsaw, power
saw, or woodworking machine. Mark cutting lines on materials, using
pencil and scriber. Anchor and brace forms and other structures in
place, using nails, bolts, anchor rods, steel cables, planks, wedges,
and timbers. Erect forms, framework, scaffolds, hoists, roof supports,
or chutes, using hand tools, plumb rule, and level. Assemble and fasten
material together to construct wood or metal framework of structure,
DOW RESTRICTED - For internal use only
using bolts, nails, or screws. Bore bolt holes in timber, masonry or
concrete walls, using power drill. Maintain job records and schedule
work crew.
Oct 04, 2010 - Feb 15, 2011
Bay Ltd - Port Lavaca, Texas
Scaffold Foreman
Formosa Chemical/ Plastics
Take direction from General foreman and relay to a small crew of six
people, design and figure out materials that will be needed to complete
job. Also ensure that all scaffolds are erected per OSHA regulations and
crew and I follow all safety rules. Gathering materials and getting them
to job site. Measure materials or distances, using square, measuring
tape, or rule to lay out work .Study blueprints and diagrams to
determine dimensions of structure or form to be constructed.
Cut or saw boards, timbers, or plywood to required size, using handsaw,
power saw, or woodworking machine. Mark cutting lines on materials,
using pencil and scriber. Anchor and brace forms and other structures in
place, using nails, bolts anchor rods, steel cables, planks, wedges, and
timbers .Erect forms, framework, scaffolds, hoists, roof supports, or
chutes, using hand tools, plumb rule, and level .Assemble and fasten
material together to construct wood or metal framework of structure,
using bolts, nails, or screws .Bore bolt holes in timber, masonry or
concrete walls, using power drill. Maintain job records and schedule
work crew.
Oct 16, 2009 - Jul 27, 2010
PMIC - Port Lavaca, Texas
Scaffold Supervisor
Alcoa mine, Sherwin Alumina
Organize crews, maintained timesheets, organizing and scheduling, due to
the importance and priority of jobs. Ensure that all employees were
qualified to perform task assigned and that foreman were maintaining
JSA, and daily reports. Ensure all scaffolds were erected per OSHA
standards. Measure materials or distances, using square, measuring tape,
or rule to lay out work. Study blueprints and diagrams to determine
dimensions of structure or form to be constructed. Cut or saw boards,
timbers, or plywood to required size, using handsaw, power saw, or
woodworking machine. Mark cutting lines on materials, using pencil and
scriber. Anchor and brace forms and other structures in place, using
nails, bolts, anchor rods, steel cables, planks, wedges, and timbers
.Erect forms, framework, scaffolds, hoists, roof supports, or chutes,
using hand tools, plumb rule, and level. Assemble and fasten material
together to construct wood or metal framework of structure, using bolts,
nails, or screws. Bore bolt holes in timber, masonry or concrete walls,
using power drill.
Nov 01, 2008 - Apr 26, 2009
Brevard - Freeport, Texas
Foreman Dow Chemical
I was responsible for two crews of eight men, keeping time and tracking
of material, responsible for having material at job sights. Maintained
job record and scheduled work crews. Measure materials or distances,
using square, measuring tape, or rule to lay out work. Study blueprints
and diagrams to determine dimensions of structure or form to be
constructed. Cut or saw boards, timbers, or plywood to required size,
using handsaw, power saw, or woodworking machine Mark cutting lines on
materials, using pencil and scriber. Anchor and brace forms and other
structures in place, using nails, bolts, anchor rods, steel cables,
planks, wedges, and timbers. Erect forms, framework, scaffolds, hoists,
roof supports, or chutes, using hand tools, plumb rule, and level.
Assemble and fasten material together to construct wood or metal
framework of structure, using bolts, nails, or screws. Bore bolt holes
in timber, masonry or concrete walls, using power drill.
Jan 01, 2008 - Oct 15, 2008
Safway Thessenkurp - San Antonio, Texas
General Foreman San Miguel Power Plant
Organize crews, maintained timesheets, organizing and scheduling, due to
the importance and priority of jobs. Measure materials or distances,
using square, measuring tape, or rule to lay out work. Study blueprints
and diagrams to determine dimensions of structure or form to be
constructed. Cut or saw boards, timbers, or plywood to required size,
using handsaw, power saw, or woodworking machine. Mark cutting lines on
materials, using pencil and scriber. Anchor and brace forms and other
structures in place, using nails, bolts, anchor rods, steel cables,
planks, wedges, and timbers .Erect forms, framework, scaffolds, hoists,
roof supports, or chutes, using hand tools, plumb rule, and level.
Assemble and fasten material together to construct wood or metal
framework of structure, using bolts, nails, or screws. Bore bolt holes
in timber, masonry or concrete walls, using power drill.
Sep 01, 2005 - Dec 29, 2007
ISI - Richwood, Texas
Scaffold Crew leader multiple industrial locations
DOW RESTRICTED - For internal use only
I was responsible for two crews of four men. keeping time and tracking
of material, responsible for having material at job sights. Maintained
job record and scheduled work crews. Measure materials or distances,
using square, measuring tape, or rule to lay out work. Study blueprints
and diagrams to determine dimensions of structure or form to be
constructed. Cut or saw boards, timbers, or plywood to required size,
using handsaw, power saw, or woodworking machine. Mark cutting lines on
materials, using pencil and scriber. Anchor and brace forms and other
structures in place, using nails, bolts, anchor rods, steel cables,
planks, wedges, and timbers. Erect forms, framework, scaffolds, hoists,
roof supports, or chutes, using hand tools, plumb rule, and level.
Assemble and fasten material together to construct wood or metal
framework of structure, using bolts, nails, or screws. Bore bolt holes
in timber, masonry or concrete walls, using power drill.
Occupational License or Certification
Associate Builders and Contractors
Qualified/Competent Person
Certification
Issued: Sep 21, 2007
Merit Shop
Scaffold Builder
Certification
Issued: Sep 21, 2007
NCCER
Scaffolding
Certification
Issued: Mar 28, 2006
NCCER/Performance
Scaffolding
Certification
Issued: Aug 21, 2007
United States Government
TWIC
License
Expires: Aug 17, 2017
OSHA
10 hour
OSHA
30 hour
MSHA
24 hour
Expires: 05/2015
NCCER Performance
Foreman
Certification
Issued Nov, 2012
OSHA Professional 132 hour
Issued 05/2014
This training covers:
OSHA 700-723
OSHA 750
OSHA 755
This will qualify me in the follow:
Occupational Safety and Health Professional 132 Hour
Occupational Safety and Health Manager 48 Hour
Occupational Safety and Health Specialist 44 Hour
Occupational Safety and Health Supervisor 36 Hour
Occupational Safety and Health Trainer (Train-The-Trainer) 36 Hour
Safety and Health Committee/Team Leader 36 Hour
Safety and Health/Team Member 32 Hour
Computer Skills
Apple or Macintosh Computers Database Software (Oracle, Access, etc) E
Mail Software (Outlook, Thunderbird, etc) Internet Browser (Internet
Explorer, Fire fox, etc) Peripheral Devices (Scanners, Printers, etc)
Personal Computers Spreadsheet Software (Calc, Excel, etc) Utility
Software (Virus, File Compression, etc) Word Processing
Software (Word, WordPerfect, etc)
Language Skills
English - Excellent (Read Write Speak)
Spanish - Excellent (Read Speak)
Additional Skills
Forklift, scissor lift, man lifts, boom lifts, and cherry pickers
Driver's License Class C - Standard Driver's License
DOW RESTRICTED - For internal use only