Objective: Obtain a challenging opportunity as a Lead Electrical

Engineer/Sr. Electrical Engineer

Highlights of Qualification:

. Over 16 years' experience and extensively worked at EPC project mainly

in oil & gas and industrial projects in Electrical field

. Skilled in basic and detailed designs, feasibility studies, vendor

document evaluations, procurement services, Construction work,

inspection of electrical equipment and materials

. Thorough knowledge of international standards such as IEC, IEEE, API,

BS, IPS, ANSI

. Modelling of electrical network and system studies (load flow, motor

starting, short circuit), involving in 3D and/or 2D design and model

review

. Applying design knowledge in hazardous area classification, load list,

power distribution, grounding, Lighting, technical specification, data

sheet, equipment sizing, UPS&DC charger, SLD, I/O list, logic diagram,

Schematic wiring diagram, PMS&PDCS, panel arrangement layout,

preparing TBE, MTO, man-hour Document, installation details

. Engineering coordination with other disciplines and able to extract

necessary information from P&ID's and Mechanical equipment list and

responsible to M.O.Ms

. Integrating between the engineering developed by the suppliers and the

engineering developed by the Company's technical departments, ensuring

the necessary information are exchanged between them

. Performing test and inspection (FAT), prepared engineering document

for pre-commissioning, Commissioning and start-up, site support

activities as per project requirement

. Problem solver and decision maker, self-motivated, organized,

responsible manner and reliable

Proficient in Auto CAD, ETAP, Dialux, Calculux, MS Office, as well as

familiar with PDMS

Work Experience:

2013-Present CB&I - The Netherlands

Statoil - HYUNDAI

Aasta Hansteen Project, Norway

Senior Electrical Engineer

Detail Design of Aasta Hansteen field development

consists of a floating production, storage and

offloading (FPSO) platform. The platform hull is a SPAR

concept with integrated condensate storage.

The installed electrical power 1s more than 20 MW

Already I'm working on the UPS and Navigation Aids

systems, including the UPS load list, requisition, Data

Sheets, UPS distribution system.

2007-2013 Tebodin Consultant & Engineers West office - The

Netherlands

2012-2013 Huntsman

Project 4th Crystallizer, Rozenburg, The Netherlands

Electrical Lead Engineer

Basic and Detail Design of 4th Crystallizer Project,

including MCC, Electrical Heat Tracing system, Cabling,

Earthing, lighting system and other electrical bulk

material. Also to review the packager engineering

documents.

2012-2013 Huntsman

Capstone (Flex Polyols Expansion) Project, Rozenburg, The

Netherlands

Electrical Lead Engineer

Basic and Detail Design Engineering of Capstone (Flex

Polyols Expansion) Project, including a 1 MVA 10/0,4 kV

transformer, main distribution panel, MCC, Electrical

Heat Tracing system, 230V AC UPS, Cabling, Earthing,

lighting system and other electrical bulk material.

2011-2013 Huntsman

Early Splitter plant project, Rozenburg, The Netherlands

Electrical Lead Engineer

Detail Design Engineering of, including 2x2.5 MVA, 2x

10/0,4 kV transformers, main distribution panel, MCC,

Electrical Heat Tracing system, 230V AC UPS, Cabling,

Earthing, lighting system and other electrical bulk

material.

2011-2013 Nuon

Diemen 33 project, Diemen, The Netherlands

Electrical site Lead Engineer

Electrical site engineering, Including 1x15 MVA 15/10

kV transformer, 2x5 MVA 20/0,690 kV transformers, 2x400

kVA 10/0,4 KV transformers, 10 kV switchgear, 690 & 400

V switchgear, AC/DC UPS's, Bus Duct, Lighting, cabling,

etc.

2007-2011 Nutricia

EPCm Zoetermeer Industrial masterplan Phase 1 project,

Zoetermeer, The Netherlands,

Electrical Lead Engineer

Basic and Detail engineering, Including the extension

of existing 10 kV network, 2x 2.5 mVA 10/0,4 kV

transformers, Bust Duct, main Distribution Board,

Lighting, Cabling, etc

Northern Petroleum Nederland B.V. (NPN):

Brakel & Wijk & Aalburg Well Tie-in Facility Project, The

Netherlands

Electrical Lead Engineer

Design review made by GEMINI Project Co and supervision

on FAT of the LV switchgears and distribution panels.

Crown van Gelder (CvG):

CvG paper factory project - Velsen-Noord, The Netherlands,

Electrical Lead Engineer

Detail Design & Procurement services for replacing the

existing 6 kV distribution system including: 6 kV

switchgears and cables, 20 MVA 50/6 kV Transformer.

E.ON B.V.:

25 kV Gate en Neste Oil project,

Electrical Lead Engineer

Conceptual design study over supplying reliable

electrical energy to new consumers/clients of E.ON in

Maasvlakte Power Station by combination of network

supply and gas-motor power plant. The consumers are

Gate, Gate Cooling Water Pump station (GCWPS), Neste

Oil, Waste Incinerator Plant (WTE) those are located in

and/or adjacent of Maasvlakte Power Station.

Network supply will be provided by ENECO in 150 kV and

Neste Oil will provide bio-propane to E.ON for burning

in the gas-motors. Network and gas-motors will be

connected to the main 25 kV switchgear through

transformers.

Northern Petroleum Nederland B.V.:

Onshore Site Development project,

Electrical Lead Engineer

Basic Design of electrical installation and procurement

engineering services of six Oil / Gas production sites

in The Netherlands in Papekop, Ottoland, Geesbrug,

Grolloo, Wijk en Aalburg (Andel-6) and Brakel sites.

TCN Mediapark:

Doing network calculation including load flow, motor

starting study, short circuit calculation and relay

setting in 10kV network in Mediapark area.

Zakum Development Company (ZADCO), U.A.E. and ADMA-OPCO.

U.A.E (Oil & Gas):

Front End Engineering Design (FEED) of the electrical

installation needed for the Early Production Scheme

(First oil production) for the new Umm Lulu oilfield

and a Conceptual Study for the Full Field Development

Project of the Umm Al-Dalkh and Umm Lulu fields.

2006-2007 Energy Industries Engineering and Design Co.

Tabriz Oil Refining Company (TZORC):

Project Electrical Coordinator

Detail design, procurement and construction of new

gasoline refinery unit in the TZORC complex including

2X12 MW gas turbine generators, 6 kV switchgears,

power transformers, power distribution control system

(PDCS), AC/DC UPS and electrical bulk material (power

and control cables, lighting system, earthing system,

2001-2006 Oil Industries Engineering and Design

National Iranian Gas Company (NIGC)

Qom III Gas Compressor Station EP Project for National

Iranian Gas Company (NIGC)

Project Electrical Coordinator

Qom III Gas Compressor Station Project (EP project):

This station is on the IGAT III gas pipe line in the

continuing of six gas compressor stations. The major

activity was Basic & Detail design and procurement of

electrical installation including: Containerized Gas

Engine Generator 1X1.5 MW, 20 kV switchgear, 0,4 kV

switchgear and MCC, power transformer, AC/DC UPS, Power

Management System (PMS) and electrical bulk material

(power and control cables, lighting system, earthing

system, electrical heat tracing

National Iranian Gas Company (NIGC)

Six Gas Compressor Station Project (EP project)

Project Electrical Coordinator

These six gas compressor stations make the first part

of IGAT III pipe line the carry gas from south of Iran

from South Pars Gas field to the Northwest of Iran for

export and internal demands. The major activity was

Basic & Detail design and procurement of electrical

installation including: Containerized

Gas Engine Generator 1X1.5 MW, 20 kV switchgear, 0,4 kV

switchgear and MCC, power transformer, AC/DC UPS, Power

Management System (PMS) and electrical bulk material

(power and control cables, lighting system, earthing

system, electrical heat tracing

Fanavaran Petrochemical Company

Acetic Acid Project (EP project)

Project Electrical Coordinator

This plant is located in Bandar Imam in the south of

Iran in the petrochemical complex. The major activity

was Detail design and procurement of electrical

installation including: Diesel Engine Generator 1X1.0

MW, 6.0 kV switchgear, 0,4 kV switchgear and MCC, power

transformer, AC/DC UPS and electrical bulk material

(power and control cables, lighting system, earthing

system,

2000-2001 Namvaran Consultant Engineering Co.

Electrical Engineer

Khouzestan Petrochemical Company

Engineering Polymer Project (EP project): This plant is

located in Bandar Imam in the south of Iran in the

petrochemical complex. The major activity was Detail

design and procurement of electrical installation

including: 6.0 kV switchgear, 0,4 kV switchgear and

MCC, power transformer, AC/DC UPS and electrical bulk

material (power and control cables, lighting system,

earthing system,

1997-2000 Kerman Tablo Co.

Azarbayjan Regional Electrical Company

Electrical Engineer

2x6.5 MW Moghan Hydro Power Plant Project (EP project):

This hydro power plant is located in the north of Iran.

The major activity of this project was detail design

and supplying of electrical auxiliaries installation

including: 11 kV switchgear, 0.4 kV switchgear,

Protection system, control system, AC/DC UPS and

electrical bulk material (power and control cables,

lighting system, earthing system,

Farab Co.

3x133 MW Karkheh Hydro Power Plant Control System

Project (EP project) including detail design and

supplying the hydro power plant control system.

Kerman Regional Water Company

Automation of Jiroft Dam Gates (EPC project) including:

detail design, supplying and installation of automation

system of the dam gates.

Education:

1994-1997 Master of science in Electrical Power Engineering

Amirkabir University of Technology (Polytechnic

Tehran)

1988-1993 Bachelor of Engineering in Electrical Power

Engineering

Amirkabir University of Technology (Polytechnic

Tehran)

Training/Certificates:

Ontario Professional Engineering Provisional License, Canada 2014;

NEN Certificate (Nederlanders Normallisatie-instituut) Dutch

standards organization, The netherlands 2012;

SMTC Global Certificate: Safety Training Awareness, The Netherlands

2010;

SMTC Global Certificate: Safety Training Awareness, The Netherlands

2009;

NEN 1010 Certificate (Nederlanders Normallisatie-instituut) Dutch

standards organization, The Netherlands 2009;

Tebodin Training Project Execution, The Netherlands 2008;

Diploma: Safety for Operational Supervisors SCC, The Netherlands 2007

Engineering Licence for Engineering of Building Electrical

Installation (Grade 2) for Tehran Province, Tehran 2001.

References: Available upon request

Contact this candidate