Calle Ciprés **C Phone (***) ***-

Urb. Flamboyán 8247/313-8267

Mayagüez, P.R. e-mail:

***** acg8iw@r.postjobfree.com

Juan H. Gierbolini

Objective Accomplished Bilingual Technology Professional experienced in the

manufacturing industry. Proven expertise in maintenance and repair of

high volume production equipment, troubleshooting of electric and

electronic circuits, implementation and administration of predictive

maintenance program in clean room environment. Service and results

oriented with can-do attitude. Works well alone or as part of a team.

Willing to travel and relocate.

Experience

November 2008- Prent Corporation

Manufacturing & Facilities Engineer

Direct the operations of the Manufacturing & Facilities

Engineering Department.

Manage multiple assigned projects meeting agreed upon quality,

cost and schedule targets.

Maintains in optimum conditions by use of the Preventive

Maintenance, Predictive Maintenance programs and corrective

actions with six-sigma (DMAIC) methodology, Statistics Process

Control and lean manufacturing principles.

Plans, coordinate, install and implement all new technological

production equipment and the transfer of the equipment from

Janesville, WI to Yauco, Puerto Rico.

Estimates cost of the production budget, administers founds

allotted within company guidelines, justify and recommend capital

expenditures.

Develop, recommend and implements new methods and

procedures for the reduction of product cost and cost of related

services.

Implement and enforces Good Manufacturing Practices,

Personnel Polices, company compliance with all Federal, State

and local and company regulations, policies and procedures for

Health, Safety and Environmental compliance.

Maintain the operations of the Manufacturing & Facilities

Engineering Department in optimum condition, assuring

compliance with all regulatory, safety and operational

requirements.

Troubleshooting and Process design.

Performing design reviews and pre-validation assessments to

ensure the safe and environmentally sound start-up of new

processes.

Manage and develop the safety program and spare parts

department.

Training and Certification of all technicians.

Compliance to current ISO 9000, ISO 2001.

Fenwal Maricao P.R.

Project Engineer

Direct the operations of the Manufacturing Engineering

Department.

Supervise and audits the operation of all manufacturing

equipment of wet filling, packing and manufacturing engineering

support areas.

Maintains in optimum conditions by use of the Preventive

Maintenance, Predictive Maintenance programs and corrective

actions with six-sigma (DMAIC) methodology, Statistics Process

Control and lean manufacturing principles.

Plans, coordinate, install and implement all new technological

production equipment and the transfer of the equipment from

Baxter to Fenwal.

Participates in the preparation and controls of the production

budget, administers founds allotted within company guidelines,

justify and recommend extraordinary of capital expenditures.

Develop, recommend and implements new methods and

procedures for the reduction of product cost and cost of related

services.

Implement and enforces Good Manufacturing Practices,

Personnel Polices, company compliance with all Federal, State

and local and company regulations, policies and procedures for

Health, Safety and Environmental compliance.

Maintain the operations of the Manufacturing Engineering

Department in optimum condition, assuring compliance with all

regulatory, safety and operational requirements.

Troubleshooting and Process design.

Responsible for performing design reviews and pre-validation

assessments to ensure the safe and environmentally sound start-

up of new processes.

Training and Certification of all operators and technicians.

Compliance to current FDA regulations and ISO Standards: 21

CFR 211/ 820, ISO 9001, ISO 13485 and EU Medical Device

Directive.

Cordis LLC San German, P.R.

Manufacturing Engineer

Performs projects designed to develop professional work

knowledge and abilities requiring application of standard

techniques, procedures and criteria in carrying out a sequence of

related engineering tasks.

Supervisor screens assignments for unusual or difficult problems

and reviews techniques and procedures to be applied on non-

routine work.

Performs work which involves conventional types of plans,

investigations, surveys, structures, or equipment with relatively

few complex features for which there are precedents.

Non- Conformance investigations.

Equipment validations (IQ/OQ) and Qualifications.

Production support and process improvement projects.

Scrap Reduction.

Down time Reduction.

Implementation of the Infinity QS SPC

Preventive Maintenance, Predictive Maintenance, Process

Control and Statistics with six-sigma methodology.

Troubleshooting and Process design.

Perform Kaizen events, Process Engineering study and

Research investigations.

Report preparation.

Responsible for ensuring personal and company compliance with

all Federal, State, and local and company regulations, policies

and procedures for Health, Safety and Environmental

compliance.

Responsible for performing design reviews and pre-validation

assessments to ensure the safe and environmentally sound start-

up of new processes.

Training and Certification of all operators and technicians.

Research and Development Center Mayagüez, P.R.

Technician of Antennas

Maintenance, constructs, inspects, calibrates, adjusts, tests and

maintains equipment, components, devices and systems for the federal

government satellite dishes.

Installation of programs for the control of antennas.

Signal and image processing of satellites NOOA, RADARSAT,

MODIS-TERRA, LANDSAT7, TERRA SCAN.

Coop at Power Electric Authority Mayagüez, P.R.

Professional in training

Supervise and performs assignments designed to develop professional

work knowledge and abilities requiring application of standard techniques,

procedures and criteria in carrying out a sequence of related engineering

tasks.

Develop the assign project, analyze and submit recommendations for the

solution of associate problems in the project.

Achieve analysis cost to make decisions.

Technological Institute Guayama, P.R.

Technician of Installation of Networks

Maintenance and installation of high-speed lines.

Ocular Science Santa Isabel P.R.

Electronic Technician

Utilizes a variety of standard developmental/manufacturing tests or

diagnostic test equipment to check out, test, trouble shoot and

maintain tools, components, instruments, test apparatus and

associated specific discipline equipment.

Performs operational functional testing, troubleshooting and

debugging of components, subassemblies and manufacturing

systems to isolate faults and determine remedy for malfunctions.

Documents all changes.

Writes technical reports using graphs and schematics to describe and

illustrate systems/tests operating characteristics, malfunctions,

deviations from design specifications, and functional limitations.

Trouble shoots electrical, test, mechanical, facilities or hydraulic

systems, components, and equipment.

Performs basic process/product tests and audits for conformity to

quality and/or regulatory requirements.

Performs self inspections of own work.

Sensors and Programmable Logic Controllers (PLC’s) trainings.

Constructs, inspects, calibrates, adjusts, tests and maintains

equipment, components, devices and systems.

Performs technical functions relating to test, layout, quality control,

fabrication, modification and assembly of mechanical equipment

and/or components.

Improvement all deficiency in the procedures.

Production line support.

Education University of Puerto Rico Mayagüez, P.R.

Bachelor Degree of Science in Electric Engineering

Graduated June 2005

Technological Institute Guayama, P.R.

Associate Degree in Electronic Engineering

Graduated May 2000

Licensed of the FCC: GROL (General Radiotelephone Operator License).

Licensed as Technician (ARRL).

Skills Test Equipment: Digital/Analog Meter, Oscilloscope, Ultrasonic Data

Collector (SDT170MD).

Software: System View, MATLAB, PSPICE, ADS, EAGLE, MS Projects, MS

Visio, MS Word, MS Power Point, MS Excel, Infinity QS, MINITAB 14, Solid

Works, AS400, Ross, Maximo PM program.

Trainings: Black Belt Certification in process. Supervisor Certification, CAPA

investigation, OSHI: Train the Trainer in Fork truck and Aerial/Scissor lift,

Project management, Arc Flash NFPA 70. 10 Hrs Occupational Safety and

Health in General Industry Safety & Health.

Other Competence: Knowledge in PLC, Member of the IEEE and IEEE

Communication. Bilingual (English/Spanish). Strong leadership

competence, analytical skills and ability to work with others to

achieve and exceed organizational goals. Project Management and

Supervisory skills, reading and Interpretation of Schematics

Diagrams, Technical Writing and Presentation Skills.

Contact this candidate