High School C
Resume:
Charles E. Dormady
Dickson, TN 37055
Dear Sir:
I am a versatile and experienced Numerical Control Programmer Analyst
with experience on 3-,4-, and 5-axis milling centers in commercial, mold,
and aerospace fields. My educational background in Physics and Math has
been augmented by many years of working through the ranks in the machinist
and tool design trades. I have programmed in direct N.C. code (MDI),
I.B.M. 360 and 370 A.P.T., a variety of Integrated Graphics (C.A.D.-
C.A.M.), some conversational programming environments, and have been using
MasterCam for the past 12 years and prefer it's strength and speed in solid
modeling. For the last 10 years I have done all of the mold designs, solid
modeling, tooling designs and production concepts for a company that builds
large custom graphic art urethane molds for the construction industry.
Since I started at this company, it has grown to become the top company in
that field.
I have set-up and operated most major C.N.C. controllers, designed and
fabricated all necessary tooling, and planned pre- and post-machine routing
sequences for complex Aerospace and commercial parts of any configuration.
Further, I have been in charge of produce-ability determinations and
sequence planning, responsible for set-up and supervision of the C.N.C.
mill department, done C.N.C. lathe and laser programming, and performed
first article and Q.C. inspection in everything from small job shops to
large aerospace facilities.
Enclosed is my resume for your consideration. I would appreciate your
contacting me at your earliest convenience to schedule an interview to
further discuss my qualifications.
Sincerely,
Charles E. Dormady
CHARLES E. DORMADY
CNC PROGRAMMER, MACHINIST
April 2014 to Present Alliance Machine and Fabrication, Ashland
City, Tn
Create programs, set-up, and run Fadal Mills. Produce all
components for assembly of automated machinery. Short term contract
nearing completion.
NUMERICAL CONTROL SUPERVISOR 3-D MOLD DESIGNER
2003 to 2013 Fitzgerald Formliners,Santa Ana, Cal.
Create 3-D solid models from verbal, sketch, or customer
prints to create graphic and/or geometric molds.used in construction
industry. Responsible for design, methods, material selection, machining
drawings, CNC programming, set-up and operator training, instruction, and
tooling creation.
MOLDMAKER
1997 to 2003 Kingson Mold and Machine, Brea, Cal.
Fabricate plastic and rubber injection, transfer, and compression molds.
Draw and program using Mastercam 6,7,8,9 on Fadal and Haas CNC mills.
Responsible for entire project from blanking stock to finish grinding,
making pins and other components, assembly, and. inspection.
NUMERICAL CONTROL PROGRAMMER
1984 to 1997 Sub contractor
Responsible for planning, tool design, programming, setup, operator
instruction, and first article in various job shops. Fabricate tooling,
design tools, create programs to fit variety of C.N.C. controllers and
machines and run critical parts not entrusted to operators. Use various CAD-
CAM and APT software and manual programming. Make all decisions and do
work necessary to complete project.
NUMERICAL CONTROL PROGRAMMER ANALYST
1980 to 1984 Rockwell International, Downey, Cal.
Program N.C. and C.N.C. mills using integrated graphics, APT 370 and MDI
formats. Worked with systems analysts in creating post processors and
bringing CAD-CAM systems on line. One of top three CAM programmers and
assisted in training other programmers on system. Helped create NC
standards manual on QC circle, and proofing procedures to interface with
operators in first article inspection buy- off. Highest output of mill
programs in department. Certified in APT 360 and 370, AD-2000, CD-2000,
and ANVIL-4000 systems.
C.N.C. MACHINIST AND M.D.I. PROGRAMMER
1979 TO 1980 McDonnell-Douglas Aeronautics, Huntington Beach, Cal.
Set-up and operate conventional and CNC vertical and horizontal mills.
Debug and edit programs, make necessary calculations and edits to improve
programs, and write MDI programs. Resigned as no possibility of
entering programming department from bargaining unit existed.
SET-UP AND LEADMAN
1977 to 1979 Simpson Company, Brea, Cal.
Set-up and repair progressive dies, operate various sheet metal machines,
interface and assist tool makers, instruct operators, expedite production
in all phases, modify existing tooling as necessary.
FIXTURE AND SAMPLE DESIGNER
1975 to 1977 Eagle Wire Works, Cleveland, Ohio
Design and fabricate fixtures, jigs, and tooling for wire and flat stock
forming, stamping, and welding. Operate mills, lathes, grinders, drill
presses, four-slides, routers, and saws to close tolerances. Use
blueprints, sketches, or verbal instructions of product concept to create
finished product and tooling.
SET-UP AND REPAIR TECHNICIAN
1974 to 1975 Hollingsworth Solderless Terminal, Pompano Beach, Fla.
Set-up, adjust, and repair dies and auto-feed systems for progressive
presses and brazers in semi-automated shop. Adjust and maintain dies and
presses as required to maintain tolerances. Instruct operators.
LEADMAN AND SUPERVISOR
1973 to 1974 Tech Components, Dayton Aircraft Co., Ft. Lauderdale,
Fla.
Set-up and repair progressive dies and supervise crews and operators.
Order stock, inventory, shipping/receiving, approve and terminate
employees. Responsible for production, planning, expediting, inventory,
and deadlines.
EDUCATION
STATE UNIVERSITY COLLEGE, BROCKPORT
Brockport, New York
Top 5 percent of class in Physics Major. 3.5 GPA. Left during final
semester of senior year due to serious automobile accident. Physically and
financially unable to continue school
COMMUNITY COLLEGE OF THE FINGER LAKES
Temporary student during transfer and relocation as Physics Major.
Canandaigua, New York
STATE UNIVERSITY OF NEW YORK AT BINGHAMTON
Binghamton, New York Physics major.
GENEVA HIGH SCHOOL
Geneva, New York
Top 1 percent of class in Science and Math. Regents Scholarship winner,
Highest SAT scores in state. National Latin honors. Science fair winner.
Consistent 4.0 GPA.
HOBBIES AND INTERESTS
I have a comprehensive wood shop including 2 Shopsmith machine
centers, table saws, lathes, horizontal and vertical router tables,
mortices, planers, and drill presses. Besides woodworking, I do all of my
own auto repair, body working, painting, engine rebuilding, and
customization. I also do gun smithing and cast and load all of my own
ammunitions in a variety of calibers. I am an avid outdoorsman and enjoy
camping, hiking, fishing, boating, and mountain biking. Also, I am a
musician and play a variety of instruments including the Hammond organ,
horns, guitars, etc. In the last 20+ years I have never sat upon a couch
or watched any TV- just work in my shop.
Contact this candidate