Power Plant Mechanical Engineer

CV of Ali Zadkhedmat-Piping or Mechanical Engineer

PERSONAL INFORMATION

NAME: Ali Zadkhedmat

NATIONALITY: Iranian

DATE OF BIRTH: 2 February 1972

MARITAL STATUS: Married

ADDRESS: Unit 1 - 1st floor- No 4- east 7th Boostan alley- Laleh St. – Marzdaran St.

Tehran-IRAN

ZIP CODE: 146*******

TEL. NO. : +98-214*******

MOBILE NO. : +98-912*******

E-MAIL : **************@*****.***

EDUCATION :

B.Sc. in Mechanical Engineering, (1993-1998)

“Iran University of Science and Technology”, Tehran - Iran

PROFILE:

I’m a Piping & Mechanical Engineer and designer with an authentic background in Oil, Gas and Power Plant

EPC Projects. I’ve worked about 12 years different position of EPC projects. I do my job very well and I’m

very exact in doing it. I have a high responsibility on my job. In designing of piping plan and pipeline and

selection and calculation of rotary equipment, I’m very strong. Also I’m a very good coordinator in EPC

projects.

I have a high perseverance and it has helped me to do my job a lot. My self-confidence is very good too. I have a

very good relation with my colleagues.

WORK EXPERIENCES:

MAPNA Group Company, Iran July 2011 – NOW

Piping Engineer and Coordinator

MAPNA is a big EPC+F contractor in Oil and Gas industries that works for big clients like Refineries,

Petrochemicals and Oil companies.

At the moment, it works on EPC+F project of custody transfer metering skid and monitoring system for fuel oil

and gas condensate for Iran Ministry of Petroleum (MOP) and its sub-companies.

I review, control and modify all issued documents and drawings of Piping and Mechanical Decipline about

mentioned project. Also I coordinate all requairing activities between MAPNA and its subcontractors at Piping

and Mechanical fields.

Pars Kayhan Engineering Company, Iran April 2006 – 2011

Piping Engineer and Coordinator

Page 1

CV of Ali Zadkhedmat-Piping or Mechanical Engineer

Pars Kayhan Engineering Co. is a big EPC Contractor in Oil and Gas industries that works for big clients like

Refineries, Petrochemicals and Oil companies. This company started its activities in oil and gas field from 2006

before that it worked in gas turbine power plant. Some of projects that I did with this company were as

following:

1) Construction of 2x20,000 m2 Oil Storage Tanks in Bardaspi Pump Station as EPC Project (Client:

IOPTC)

January 2008 – January 2011

Engineering, Procurement, Construction, Installation & Commissioning of:

- 2x22000 m3 Floating Roof Storage Tanks for Crude Oil

- 2x3000 m3 Fire Water Storage Tanks

- Booster Pumps (2 Sets)

- Piping System (Underground & Aboveground)

- Fire Detection and Fire Fighting Systems including Pump Station, Foam Package, Fire

Alarm System and ...

- Instrument

2) Construction of 2x11,000 m2 Storage Tanks in Pale Baba Pump Station as EPC Project (Client: IOPTC)

January 2008 – January 2011

Engineering, Procurement, Construction, Installation & Commissioning of:

- 1x11000 m3 Floating Roof Storage Tank for Kerosene

- 1x11000 m3 Fixed Roof Storage Tank for Gas Oil

- Booster Pumps (2 Sets)

- Piping System (Underground & Aboveground)

- Fire Detection and Fire Fighting Systems including Pump Station, Foam Package, Fire

Alarm System and ...

- Instrument

3) Bandar Abbas Oil Product Export & Import Facility Expansion EPC Project (Client: NIOEC)

January 2008 – January 2011

Engineering, Procurement, Construction, Installation & Commissioning of:

In Shahid Rajaee Jetty:

-Loading Arms (2Sets)

- Piping System (Aboveground and size 16”)

-Instalation of Metering Packages for Shahid Rajaee Jetty (3 Packages).

- Fire Fighting Systems including Pump Station, Foam Package and water monitors.

In Foolad Jetty:

- Piping System (Aboveground and size 32” &24”)

-Instalation of Metering Packages for Foolad Jetty (2 Packages).

- Fire Fighting Systems including Foam Package and Water Monitors.

In Bandar Abbas Oil Refinary:

- ATK Pumps (4 Sets)

- Piping System (Aboveground and size 16”)

Between Shaid RajaeeJetty and Bandar Abbas Oil Refinary:

- Pipline System (Underground,Aboveground, Insolated and Non Insolated, size

24”,20”,16”,8”)

- Valve Pit

4) Tehran Refinery EPC project (Client: Tehran Refinary)

April 2006 – February 2011

Engineering, Procurement, Construction, Installation & Commissioning of:

In Booster Pump Project:

Page 2

CV of Ali Zadkhedmat-Piping or Mechanical Engineer

- Can Type Pump for Crude Oil (4 Sets)

- Piping System (Aboveground)

- Instrument

In Cooling Water Pump Station Project:

- Cooling Water Pump with Steam Driver (6 Sets)

- Piping System (Aboveground,Underground, Insolated and Non Insolated)

- Surface Condensor (3 sets)

5) Orumiyeh Gas Turbine Power Plant EPC project (Client: Mapna)

April 2006 – February 2007

Engineering, Procurement, Construction, Installation & Commissioning of Auxiliary Steam

Boiler Package including:

-With softeners, Dearator, blow down, condensor tank, gasoil tank

-Dosing systems

-Piping System (Insulation and non insulation)

-Pump system (for hot water and condensate)

-Instrument

I reviewed and modified all issued documents and drawings of Piping, Mechanical and Fire Fighting System.

Also I coordinated all requairing activities between Pars Kayhan and its subcontractors at Piping, Mechanical

and Fire Fighting fields in mentioned projects. At Orumiyeh GTPP project, I was responsible of purchase,

construction and erection of Auxiliary Steam Boiler Package and coordinated all activities about it between

client and manufacturere. In Tehran Refinary Projct, I was too superviser of construction and commissioning

of cooling water pump with steam driver and crude oil booster pump.

Petrosadian Consultant Engineering Company, Iran May 2005 – 2006

Piping Designer and Head of Engineering Dept.

Petrosadian Consultant Engineering Company is a young company that worked for National Iranian Oil

Products Distribution Company (NIOPDC) . This company designs Oil depots for NIOPDC according to the

most important oil global. Some of projects that I did in this company as Head of Engineering Dept.

are as following:

1) Qazvin Oil Depot Development Project (Client : IOPDC).

2) Shahid Montazeri of Esfahan Oil Depot Development Project (Client : IOPDC).

3) Preparation of Tender Documents for Chabahar Oil Depot Tender (Client : IOPDC).

4) Fuel Station of Orumiyeh Airport Project (Client : IOPDC).

5) Ghasr e Shirin Oil Depot Project (Client : IOPDC).

6) Eslam Abad Oil Depot Project (Client : IOPDC).

I designed and prepared all documents and drawings of piping in mentioned projects. Also I managed all

activities of Engineering Department.

Pars Kayhan Engineering Company, Iran Feb. 2002 – 2005

Piping and Mechanical Engineer and Coordinator

Pars Kayhan Engineering Co. is an EPC Contractor that was contractor of MAPNA in Power Plant projects.

Some of projects that I did in this company as piping designer and coordination were as following:

1) Sanandaj Gas Turbine Power Plant EPC project (Client: Mapna).

2) Damavand Gas Turbine Power Plant EPC project (Client: Mapna).

3) Mobin Petrochemical Gas Turbine Power Plant EPC project (Client: Mapna).

4) Abadan Gas Turbine Power Plant EPC project (Client: Mapna).

Page 3

CV of Ali Zadkhedmat-Piping or Mechanical Engineer

I designed, prepared and reviewed all documents and drawings of piping, mechanical and fire fighting systems in

mentioned projects. Also I surveied and controled all vendor documents at piping, mechanical and fire fighting

equipments. At Abadan GTPP project, I also was responsible of purchase and construction of Hot Oil Preheating

Package for fuel oil of power plant.

Aron Ab Eineering Company, Iran April 2001 – 2002

Piping and Mechanical Designer

Aron Ab Engineering Company is an EPC contractor that worked in Water Treatment and Wast Water

Treatment Projects. Some of projects that I did with this company were as following:

1) Water Treatment Plant Project of Kerman Gas Turbine Power Plant (Client: Mapna).

2) Water Treatment Plant Project of Bollore Noori Tazeh Factory (Bollor e Noori Tazeh Factory).

I designed and prepared all outline drawings and detail drawings of pressure vessels and storage tanks for

mentioned projects. Also I supervised on construction and erection of these vessels and tanks.

Air force Support Center of Esfahan, Iran Feb.1999 – 2000

Sodier

I simulated power transfer from the engine of helicopter to its main and sub-station rotors by 3D Atuo Cad

Software.

Iran Vanet Car Factory July 1997

Student University

I optimised consumption of service air at Pneumatic system of this factory.

Azar Ab Co. July 1996

Student University

My directed manager wanted me to classify different type of thermal power plant on fuel consumption,

manufacturere and technology.

MY WORK SKILLS & RESPONSIBILITIES:

• 2D & 3D design of Piping Plan for the Oil and Gas industry, Petrochemical, Refinery and Power Plant

Projects by Auto cad, CadWorx and PDMS software. (Piping)

• In depth experience, in preparing and designing of Plot Plan, Plant layout and General Piping

Arrangement, Pipe Support, Site & Piping Survey for the Oil and Gas industry, refinery and power plant

projects. (Piping)

• Expert skills in preparing and designing of all technical documents for construction and installation of

piping work as Tie-In list, Piping plan and Isometric. (Piping)

• In depth experience, in preparing of all technical documents for purchasing of fix equipment, fire fighting

and piping equipments as Line list, Valve Specification, Valve Data sheet, MTO & MR for Duplex Filter,

fitting, pipe, Firewater pumps. (Piping)

• Well qualified in preparing of tender documents at piping, mechanical and fire fighting systems for the

Oil and Gas industry, refinery and power plant tenders. (Piping)

• Expert skills in reviewing and checking of all piping and pipeline design/engineering documents.

(Piping)

• Review scope of works and prepare Piping MTO (Material Take-Off) for EPC projects. (Piping)

• Provide technical consultancy for piping & layout. (Piping)

• Piping Stress Analysis experience (Caesar II). (Piping)

Page 4

CV of Ali Zadkhedmat-Piping or Mechanical Engineer

• Develop basic design, detailed engineering & procurement related activities of Rotating Equipment

such as pumps, steam turbine and etc. (Rotary)

• Providing rotating equipment information throughout the various proposal, engineering and

construction phases to the project team. (Rotary)

• Developing rotating equipment specifications and commissioning guidelines for the equipment.

(Rotary)

• Well qualified in Designing and providing the technical expertise to assist in achieving accuracy in

project of PFD (process flow diagram) and P & ID (piping and instrumentation drawings) for petroleum

plants and fire fighting systems. (Rotary)

• Reviewing and approving vendor and subcontractor documentation for rotating equipment and fix

equipment on assigned projects. (Rotary & Fix)

• Issuing and check the basis of design, specifications, data sheets, requests for quotations, purchase

specifications, technical bid evaluations, purchase requisitions and drawings. (Rotary & Fix)

• In depth experience, in preparing and Designing of all technical documents for purchasing and selection

of rotating equipment s as MR and Data Sheet for API Centrifugal Pumps or Steam Turbine. (Rotary)

• Supervising of installation and commissioning of fix and rotary equipment.

• In depth experience, in Preparing and Designing of all technical documents and detail drawings for

construction and installation of 20,000 m3 fix or floating roof storage tanks according to API and

pressure vessel according to ASME Sec. VIII. (Fix)

• Fired Heaters experience.

• To ensure work is carried out in accordance with relevant Codes, Standards and Procedures. (Piping,

Rotary and Fix)

• Evaluate bids and supervise contractor. (Piping, Rotary and Fix)

• Expert skills in Supervision of Construction and Erection of Steam Boilers, Pressure Vessels, Storage

Tanks, Fire Fighting and Piping and Pipeline Works. (Supervision)

• An Excellent coordination between clients, contractors and other disciplines to access requirements at

piping and mechanical jobs. (Coordinator)

• Good written, verbal communication and computer skills in an engineering environment. (General)

• Practical Application of Engineering Skills to Solve Engineering Problems. (General)

• Contribute to achievement of team goals and promote teamwork. (General)

• Provide assistance with the recruitment of personnel (interview and selection).

MY CERTIFICATES:

• Opercom Methodology & ICAPS software (2014)

(At Phase 14 Assaloye: 68 hours)

• Certificate in PDMS (Design of Piping) (2012)

(At Novin Parsian company: 40 hours)

• Certificate in Pump Selection and Calculation (2012)

(At Neyrperse Company: 20 hours)

• Certificate in HSE (2012)

(At Neyrperse Company: 20 hours)

• Certificate in ASME B31.4 (Pipeline Transportation Systems for Liquid Hydrocarbons) (2008)

(At The Iranian Society of Mechanical Engineers: 20 hours)

• Hysis and Pipesis (Hydrulic Calculation at Process Plant and Loops) (2008)

(At Pars Kayhan Engineering Company by Private Teacher: 40 hours)

• Certificate in Caeser II(Stress Analysis of Pipeline) (2006)

(At the Tehran Institute of Technology: 35 hours)

• Certificate in Tank 2.4(Design for Storage tank according to API 650) (2004)

Page 5

CV of Ali Zadkhedmat-Piping or Mechanical Engineer

(At The Mehras Consulting Company: 20 hours)

• Excel (Tehran: 20 hours) (2001)

• Word 2000 (Tehran: 20 hours) (2001)

• Auto Cad 2000 (Tehran: 30 hours) (2001)

• Cad Worx (Design of Piping) (2001)

(At Pars Kayhan Engineering Company by Private Teacher: 30 hours)

• Certificate in Plumbing and Installation of heating packages of hot water (2000)

(At Esfahan Institute of Technical and Vocational: 900 hours)

STANDARDS :

Standards that I have worked with them in my different projects are as following:

1) GS EP EXP 101 (Pre-Commissioning and Commissioning specifications)

GS EP EXP 103 (Pre-Commissioning and Commissioning Technical Preparation)

GS EP EXP 105 (Pre-Commissioning Execution)

GS EP EXP 107 (Commissioning Execution)

2) API (American Petroleum Institute) as API 6D, 650, 610.

3) ASME (American Society Of Mechanical Engineers) as ASME B31.3, B31.4 & Section VIII.

4) BS (British Standard Institution)

5) MSS (Manufacturers Standardization Society of the Valve and Fittings Industry)

6) NACE (National Association of Corrosion Engineers)

7) ASTM (American Standard for Testing Materials)

8) IPS (Iranian Petroleum Standard)

9) NFPA (National Fire Protection Association)

10) ANSI (American National Standard Institute)

11) DIN (Deutsches Institute Fur Normung)

12) AWS (American Welding Society)

13) TEMA

LANGUAGE SKILLS:

English: Reading, Writing and Speaking - Good

Persian: Reading, Writing and Speaking - Fluently

PERSONAL HOBBIES:

Sport (Footbal, Swimming, Gym), Travelling, Movie, Music, Reading Book

Passport Details:

Passport No.: W20833408

Date of Expiry: 16/04/2016

Page 6

CV of Ali Zadkhedmat-Piping or Mechanical Engineer

Page 7

Contact this candidate