T Sathiyaseelan
Mechanical Engineer
(Rotating Equipment & Package Engineer)
Mobile no.: +91-954-***-****
Email id: ***********@*****.***
CURRICULUM VITAE
* ***** ** ********** ** Engineering and detailed design of various rotating equipment area dealing with large turbo machineries like gas turbines, compressors, pumps and diesel engines in OG&C and process industry. Adequately qualified to able to develop specifications for design and procurement of rotating equipment by applying the applicable international codes, standards and/or project specific standards. I have worked for Leading EPC Contractors, Owners and Consultants.
EDUCATION AND PRACTICE
• 1st class Bachelor Degree in Mechanical Engineering from VLB Janakiammal College of Engineering and Technology (Affiliated to ANNA University – Chennai, India), Year of passing: 2005.
• Accomplished Bechtel Certification (internal certification body which authorize an engineer to work in any project)
JOB RESPONSIBILITIES
• Preparation of mechanical data sheets, equipment specifications, and material / purchase requisitions
• Bid Review and Vendor drawings / documents review
• Technical questionnaire’s / clarification meetings with Client’s, PMC’s, Licensor’s and Vendors
• Preparation & Review of Technical Bid Analysis/Evaluation (TBE)
• Expediting and follow-up with Vendor’s
• Resolving various Interdisciplinary technical issues / Project Engineering and interdisciplinary co-ordination
• Developing / reviewing Piping and Instrumentation Drawings (P&ID’s), reviewing Utility Flow Diagrams (UFD) and Material Selection Diagram (MSD).
• Preparing system sizing calculation like pressure drop & pipe sizing, design pressure & design temperature, equipment sizing.
• Witness of shop & site acceptance tests / Vendor Shop Visits
• Plant model review with intra-discipline, PMC, Client and Licensor.
JOB COMPETENCIES
• Developing FEED, basic design, detailed engineering and procurement related activities of Rotating Equipment / package.
• Conversant with international codes and standards (API, ASME/ANSI and Hydraulic Institute) and to engineering technical reference books for rotating equipment.
• Effective communication skills both verbally and in writing with superiors, colleagues, and individuals inside and outside the Company.
• Experience of working in multicultural environment like consultant, EPC, Owner’s Engineer and project site.
• Knowledge of process as well as mechanical disciplines.
COMPUTER PROFICIENCY
• Utility Software: Pressure Profile Suite (PPS) V7.7.8, Pipenet, Smart Plant Review (SPR), AUTOCAD, HTRI (Beginning), and COMPRESS (Beginning)
• Application: MS Office 2010 (WORD, EXCEL, and POWER POINT)
• Database System: Databroker, Inspec
• Document Management: Brava and InfoWorks (“View & Redline” tool)
KNOWLEDGE OF CODE
• Familiarity with National / International codes & standards like ASME, API, HIS and In-house procedures and standards.
EMPLOYMENT HISTORY
June 2012 onwards Bechtel India Pvt. Ltd., India
Project – Magnida Fertilizers Facility, American Falls, Idaho (Proposal)
EPC Contractor - ThyssenKrupp Uhde as an engineering and procurement contract for the construction of one of the world’s largest single-train liquid fertilizer plants to be built in the United States of America.
• Preparation of material requisition, mechanical datasheet, TBE for emergency diesel generator package (2500KW, Non road diesel engine driven in compliance with Code of Federal Regulations and IEEE 446)
• Reviewing bids of VS1 type 2500HP rated cooling water pumps in compliance with API 610 and firewater pump package (NFPA 20 accordance) and resolving technical queries.
• Preparation of material requisition, mechanical datasheet, technical bid evaluation (TBE) for glycol system which includes glycol heater (API 12K Natural Gas fired heaters - 9.35 MMBTU/Hr), centrifugal pumps, drains drum, filters and expansion tank.
Project – La Paloma Energy Center Combined Cycle Power Project, Harlingen County, Texas (EPC)
• Responsible for basic and detailed engineering of natural gas system which includes rotary-type positive displacement gas compressor (1700 HP) in compliance with API 619, GE 7FA.05 frame Combustion Gas Turbine Package with rating 211MW, natural gas conditioning unit, etc.
• Development of P&ID, Pressure drop calculation and line sizing for Gas Turbine natural gas system, Gas Turbine customer connection/interface list.
• Preparation of material requisitions and data sheets for natural gas conditioning unit (natural gas filter separator, performance heater, fuel gas scrubber and drain tank)
• Natural gas / gas fuel supply over-pressure protection design in comply with ASME 31.1 Sec 6, 122.8.1 to meet Gas Turbine interface pressure requirement.
• Providing over-pressure protection control valves inputs to control system discipline.
• Review of vendor drawings for Gas Turbine and natural gas system equipment. Reviewing natural gas system simulation study.
Project – Erbil Combined Cycle Power Project, Arbeel (EPC)
• Engineering coordination and interface engineering for Steam Turbine Package (STG) in compliance with API 611 and its lubrication, shaft-sealing and control-oil system in compliance with API 614.
• Review of vendor drawings for Steam Turbine and data documentation for compliance with project specification requirements
• Review and closeout of client comments
Project - Solar Thermal Power Plant System (STPPS), California, United States (FEED)
• Preparation of material requisition, mechanical datasheet, technical bid evaluation (TBE) for plant air system equipment and general purpose pumps
• Responsible for basic and detailed engineering of Compressed air system which includes rotary compressor in compliance with API 619, air receiver and dryer in compliance with client scope requirement.
• Coordination with other technical disciplines on projects for development in detail engineering.
Dec 2010 - May 2012 Adani Power Ltd., India
Project - Adani Power Ltd, 5 x 660 MW Pulverized Coal fired Supercritical Thermal Power Plant, Mundra, Gujarat, India (Owner Engineer)
• Engineering coordination and interface engineering for Steam Turbine Package (STG) in compliance with API 611 and its lubrication, shaft-sealing and control-oil system in compliance with API 614.
• Responsible for detailed engineering of circulating/condenser cooling water system and seawater water intake system.
• Review of P&ID, system sizing calculation, design criteria document, technical specification and co-ordination with various discipline and vendors.
• Packages handled are steam turbine & its auxiliaries, lube-oil pumps, 4.8MW rated vertical turbine pumps, vacuum pumps (water ring type pumps) and boiler feed water pumps (horizontal multistage, between-bearings pumps).
• Coordination with contractors, consultant and other technical disciplines on projects for updates in detail engineering including constructability requirements.
• Involving in supervising annual overhauling of machineries.
• Participating in root cause analysis and study the reliability & availability of the large turbo machineries like turbine, vertical turbine pumps and compressors.
• Witnessing and evaluating performance monitoring of rotating equipment
July 2009 – Dec 2010 BGR Energy Systems Ltd., India
Project - 2 x 600 MW, Kalisindh Thermal Power Project, Rajasthan Rajya Vidyut Utpadan Nigam Limited, Jaipur, Rajasthan, India (EPC)
• Responsible for cooling (condenser cooling, closed loop, auxiliary) water system, boiler feed water system and compressed air system
• Development of P&ID, preparation of system sizing calculation, mechanical datasheet, equipment specification, TBE for auxiliary cooling water pumps (one- and two-stage, between-bearings pumps), 25000cu.ft/hr rated 3 x 33% condenser cooling water pumps (vertical turbine pumps) and compressor (Rotary-Type Positive-Displacement Compressors)
• Approval of system sizing calculation for closed cooling water system, condenser cooling water system and compressed air system
• Development of circulating water system steady state analysis report
• Coordination with other technical disciplines and vendors on projects for updates in detail engineering including constructability requirements
• Review and closeout of client/ owner’s consultant comments
• Participating in inspections and testing of vertical turbine pumps supplied by Mather & Platt Pumps Ltd., Pune
April 2007 - July 2009 EICS Power Services (P) Ltd., India
Project - 1 X 10 MW Captive Power Plant on a/c of M/s. Vikash Metals & Power Ltd., West Bengal, India (Owner Consultant)
• Preparation of P&ID’s (Steam, Water and Compressed Air System)
• Preparation of Material Requisition
• Review of equipment bids and preparation of technical bid evaluation
• Reviewing, commenting & approving of various vendor documents & drawings
• Preparation & Review of IBR piping calculation for statutory approval
• Assistance for Erection and commissioning activities
• Review and comment on as built drawings
Field experience:
• Involved in Trial run and successful commissioning activities of 1 X 10 MW Captive Power Plant on a/c of M/s. Vikash Metals & Power Ltd., West Bengal.
• Undergone inspection of the surface condenser at Laxmi Engg. Ind. (Bhopal) Pvt. Ltd. for 2 X 15 MW Captive Power On a/c of M/s. Impex Ferro Tech Ltd., West Bengal.
June 2005 - March 2007 KLRF Sheet Metal Industries, India
Engineer
• Responsible for the preparation of Material Purchase Specification (MPS) and data sheets for rotary equipment like general purpose pumps and compressor.
• Reviewing, commenting & approving of various vendor documents & drawings.
• Coordination with various equipment vendors.
HONORS, AWARDS AND DISTINCTIONS
• Letter of appreciation for the contribution in successful commissioning activities of 1 X 10 MW Captive Power Plant on a/c of M/s. Vikash Metals & Power Ltd., West Bengal, India.
• Rewarded 2nd place for technical paper presentation and design contest in a National Level Technical Symposium.
PERSONAL DETAILS
• Gender : Male
• Nationality : Indian
• Marital Status : Single
• Date of Birth : 23.05.1984
• Passport No. : F9598562
• Date of issue & expiry : 06.09.2006 & 05.09.2016
• Languages known : English & Tamil
I hereby declare that the information furnished above is true to the best of my knowledge and the date of last update is 22/08/2014.
(T.SATHIYASEELAN)