GEORGE SHERRING

**** ********* ****., ******, ** 01854

Tel: 978 -996-5646 Email: acfbo1@r.postjobfree.com

OBJECTIVE

Looking for a challenging position as a Medical,Quality Control

Inspector, Medical Catheters, Test technician, years of experience in

Optical assembly and alignment. Fiber Optic Lasers, high power lasers and

fiber optics or Electronics Assembler in an organization where I can use my

wide experience for the benefit of the company. Fiber Optics

Splicer..Using Fuji Kura,Erricsson Fusion Splicer.Years of Experience with

soldering Components.

SUMMARY

Tech,QA Inspector in Optical Lasers/Medical Manufacturing,Quality Control

Inspector, FDA and ISO regulated environment. Extensive background working

with a variety of Medical Device Stents, Coronary Artery balloons, Urinary

Catheters, Glucose Monitoring Meters, Fiber Optics Lasers, Fiber Optics

Splicing. Subject Matter Expert in GMP.Worked in Clean room environment.

Familiar with all aspects of calibration and basic inspection tools

including height gauge, diagram reading, geometric tolerance and able to

record all QC results. Worked in Clean rooms environment.

Prior experience, knowledge developing medical devices in an FDA regulated

environment.

Worked in Medical Manufacturing as a Subject Matter Expert.

Trained new employees in GMP (Good Manufacturing Practice). Assembly and

installation of electrical components parts, on job sites and production

lines;

Skilled in troubleshooting and promptly taking corrective action;

Read and interpret blueprints/bills of materials; adhere to safety

policies, procedures and codes;

Utilize Manual Fiber Optics laser welder, computerized laser welder

(Newport), microscope, air gun, solder gun, etc. Worked on Microsoft

Windows Professional.

EDUCATION: High School Graduate. Certified Medical Lab Technician.

RELEVANT SKILLS AND EXPERIENCE

Working in 5S Lean Manufacturing Environment.

Work as part of a team and independently to carry out production, testing

and assembly as per instructions.

Work in clean room, controlled and non controlled environment in medical

company.

Assist engineers for product improvement.

Materials/Inventory Control department experience.

QC inspector. Strictly follow GMP (Good Manufacturing Practice)

Basic computer knowledge

Fiber

optics splicer ( SMF SPLICING,PM SPLICING, ATTENUATION SPLICING )

SKILLS (Manufacturing, Assembly QC, testing)

Medical Manufacturing Equipment Assembler

Lasers, Fiber Optics, Splicer, Technician

QC Inspector Certified Fiber Optic Laser Welder

Trained new assemblers

EMPLOYMENT EXPERIENCE:

METTLER TOLEDO, Bed Ford,MA September 2013- February 2014 ( Clean

Room )

Working as a Technician in Fiber Optical department. Making Laser /Fiber

Probes for Bio Scientific Companies. Trained new Employees in Manufacturing

department also Working with Engineers in R&D department. Working in Clean

Room Environment. Helping engineering in modification procedures.

Axcel Photonics, Marlborough, MA Nov. 2011 - April 2012 (Clean room

environment)

Senior Fiber Coupling Specialist. Working in a precision fiber optics Class

10K clean room environment. Responsible for aligning Fiber Tips to Laser

Chip Facets. Using a Manual & Semi-Automated Fiber Coupling System. Work

with engineers for product improvement and manufacturing techniques. Job

responsibilities included Laser welding, fiber splicing, final inspection

of the manufactured product, training new recruits, and work with R & D

engineers for product improvement and manufacturing techniques. Work on

high & Low power Fiber Optical Lasers used in Medical filed.

NET BIO, Waltham, MA July 2011 Nov. 2011 Contract ( Clean room

environment)

QA Inspector Follow GMP rules and regulation. Assembled Chips for DNA

testing for human use. Maintain detailed documentation throughout all

phases of research and development. Maintain accurate work records such as

engineering notebooks and job travelers. Train new employees. Precision

cutting of very small plastic & paper film membranes. Also used Saline for

flow rate and leakage testing to make sure all are open for blood to flow

without any blockage. Also did Visual inspection after finished the

Leakage test.

TDC Medical, Marlborough, MA 2011-2011 Contract (Clean room

environment)

Assemble, test and package Urinary catheters following written

instructions.

Work with engineers to develop and improve assembly methods.

Maintain accurate work records such as engineering notebooks and job

travelers.

Maintains detailed documentation throughout all phases of research and

development

Train assemblers in assembly methods.

Perform incoming inspection of components as required, including leakage

testing.

Maintain accurate inventory records.

Assists with in-process testing to assure product meets specifications.

Operates computer, laboratory and manufacturing equipment to test and

develop.

Bench Mark Electronic, Hudson, NH 2004 -2010 (Clean rooms environment)

Worked as a Senior Lab Tech. Job responsibility involved fiber optic Laser

splicing, Mechanical Assembler using NEC & FITEL lasers. SMF splicing PM

splicing & Attenuation fiber optic splice. QC. High technology board,

optical, box and system level assembly. High Voltage Optical boards

Muxciver, Tranciver,UDC. Trained new employees on Handling Optical Fibers

and All kinds of Splicing. Test all the boards after assembled. Product

reliability hardware testing and environmental testing. The product is

brought to early maturity via a burn-in chamber.

Corning Lasertron, Bed ford, MA 1999 - 2004 (Clean rooms environment)

Senior Certified fiber optic & laser technician primarily assemble and

pigtail all the lasers worked with 980, source, Raman pumps. Worked

different types of Lasers insert polished fiber in to the laser. Match with

laser chip to get the right power. Weld using Automation tool (Newport). Re-

bend after weld to get the power back. Adhere to blueprint and production

specifications. Job responsibilities included Laser welding, fiber

splicing, Visual & final inspection of the manufactured product, training

new recruits, work with R & D engineers for product improvement and

manufacturing techniques, trained many new employees for fiber laser

welding on Manual & Automation tool (Newport) Spliced fibers using Ericson

machine. Also Worked in QC department for environmental testing of Lasers

extremely at high and low temperatures and very high or low humidity to

make sure Lasers worked well in any type of environment. Also worked on

Fiber Optic Splicing using such as pull and tension testing to make sure

Splicing of the Fiber will not break under stress.

Boston Scientific Corp. Water town, M.A 1997 -1999 ( Worked in Clean rooms

environment)

Worked as a senior subject matter Expert. Trained new employees.

Manufacturing technician / assembly worked in Clean room environment areas

as medical equipment assembly technician. Job responsibilities include

Winding stent, Strapping, Annealing, Welding and Final inspection, Welding

stent with an electronic laser welder, balloon top assembly. Used

microscope to inspect the products for the final process. Stockroom

controller, inventory data entry in computer system, schedule trainings,

train new recruits. Tools used: Microscope, Laser welder, Heat gun, Laser

mice, Annealing oven, Core wires, Electronic cleaning machine, Electronic

balloon attach machine and Air pressure vacuum station. Also have very

strong experience as an Inspector in Quality Assurance department. Test

Balloons for leakage and flow rate testing, using water to make sure there

were no Bubbles and all the balloons were safe for Heart Surgeons to use.

Medisense Company, Burlington, MA 1995 - 1997 (Worked in Clean rooms

environment)

Assembler/Quality inspector. Worked in assembly line of blood sugar test

meters. Electronic soldering and electronic automatic attach machine. Check

segments and inspect the blood tester with electronic tester and label.

Trained new employees.

People Federal Bank, Brighton, MA 1994 - 1995

Worked as a bank teller customer service, accounting, and data entry book

keeping.

Medical Lab Technician, 1990 -1993.

LICENSES & CERTIFICATIONS in Anatomy, Chemistry, Biology.

Worked in Clean rooms environment. Collect diagnostic samples for clinical

assessment and quality assurance from a variety of laboratory. Process

blood samples and bacterial cultures for submission to an outside

laboratory. Track and monitor progress and results of responses to disease

outbreaks. Maintain controlled substances records. Verify instrument

functioning by checking and calibrating specific lab instruments. Verify

test procedures are performed in accordance with standard operating

procedures. Executed and analyzed tests in areas including chemistry,

hematology, urinalysis, serology, histology and bacteriology to aid

physicians in diagnosing and treating disease. Consistently commended for

the timely, high-quality completion of both routine and special laboratory

assays of patient specimens (including blood and other bodily fluids, skin

scrapings and surgical specimens.

Lowell General Hospital (Phlebotomist)

Collected urine drug screen specimens.

Performed laboratory computer operations.

Contact this candidate