Engineer Power Plant

Curriculum Vitae

(June, ****)

* (*)

Name T. Raghuraman

Email id **************@*****.***, ************@*****.***

Contact Number Vietnam: 008*********** & 008***********

Birth Details 27-05-1971, Citizen of India

Education 1999, Associate Member in Institution of Engineers (India)

A.M.I.E(I) - ( A Mechanical Graduate Engineer)

1990, Diploma in Mechanical Engineering (DME)

Current Position Site Mechanical Inspector (P yry Energy Ltd)

Languages English, Hindi & Tamil

Memberships Corporate Member in "The Institution of Engineers (India)"

a Professional Engineering Institute.

Chartered Engineer - Mechanical

Foreign Experience Vietnam, UAE & OMAN

Personnel Introduction A successful, degree qualified and highly

motivated Mechanical Engineer with over 22 years extensive experience,

(9 years in overseas) major period in the field of Power Projects and oil &

gas/petrochemical.

Gained experience in project phases from initial engineering, construction,

site supervision, testing commissioning and start up with

documentation/drawings.

Flexible, open minded, a natural team leader and player with excellent

communication skills at all levels, with a proven ability to work under

pressure in any situation. Experienced in difficult and remote locations

and managing operations with minimal supervision.

I will be an effective part of any organization by doing the challenging

jobs in order to deliver my best performance and skills to meet & full fill

the requirements and commitments as in present competitive market with

quality assurance through my better communication, leadership and

management skills.

P yry Experience

Since March P yry Energy Ltd.

2011

Position: Site Mechanical Inspector-Owner's Engineer(Petro

Projects: Vietnam)

2x600MW, Vung Ang Thermal Power Plant Project, Ha Tinh

province, Viet Nam.

Responsible for all mechanical inspections such as site

fabrication, erection, NDT, testing and commissioning

activities in boiler, turbine and BOP areas.

Review and approval of basic and detail engineering

design, Design modifications instructions, Safety

procedures, Method of statements, operation manuals,

Subcontractors list, Material suppliers and vendors

list, Inspection and test plan lists, Quality

certificates and test results, calibration certificates

for instruments using at site, Pre-commissioning

procedures, Commissioning procedures, Inspection

reports, Etc., submitted by EPC contractor.

NCR against quality and quantity subject to approved

contract document requirements, local rules &

regulations and the relevant applicable standards,

Lettering to Owner and EPC contractor regarding any

kind of deviations absorbed during construction,

Lettering the delays in project and recovery plan

schedule, Preparing monthly progress report, Updating

of transmittals and their replies.

Preparation of Commissioning program, conducting of

daily commissioning meetings, Supervision of

performance tests, Preparation of punch list,

conducting official site walk downs, monitoring EHS at

site etc.

Experience in chronological order prior to P yry Energy Ltd.

Projects

Aug 2008 FICHTNER GMBH & Co. KG,

-Jun 2010 BOP-Mechanical Expert - Owners Engineer (PECC1)

Quang Ninh I - 4x 300 MW Thermal Power Station

Quang Ninh Thermal Power Joint Stock Company, Halong

City, Quang Ninh Provience, Vietnam

Specially employed as Consulting Engineer for the BOP

areas in Thermal Power Stations for Design,

Construction and Commissioning activities.

Role and responsibilities:

Review and approval of : Basic and detail engineering

design, Design modifications instructions, Safety

procedures, Method of statements, operation manuals,

Subcontractors list, Material suppliers and vendors

list, Inspection and test plan lists, Quality

certificates and test results, calibration certificates

for instruments using at site, Pre-commissioning

procedures, Commissioning procedures, Inspection

reports, Etc, submitted by EPC contractor.

NCR against quality and quantity subject to approved

contract document requirements, local rules &

regulations and the relevant applicable standards,

Lettering to Owner and EPC contractor regarding any

kind of deviations absorbed during construction,

Lettering the delays in project and recovery plan

schedule, Preparing monthly progress report, Updating

of transmittals and their replies.

Preparation of Commissioning program, conducting of

daily commissioning meetings, Supervision of

performance tests, Preparation of punch list,

conducting official site walk downs, monitoring EHS at

site.

Inspections for all types of piping, static and

rotating equipments in fabrication shops, site

erection, alignment, testing, pre-commissioning,

commissioning, punch point closing and warranty defects

of full BOP packages. Also for material and equipments

supplied by vendor, preservation of equipments at

storage yard.

Areas covered under my site inspections in BOP are :

Fire fighting system, Raw water system, Water treatment

system, FGD system, Electrostatic precipitator, Fuel

oil system, Auxiliary cooling system, Circulating water

system, Hydrogen generation system, Ash handling

system, Compressed air system, Waste water treatment

system, Carbon dioxide and nitrogen supply system,

Emergency diesel generator power supply system,

Chemical dosing and Chlorination treatment system, HVAC

system, Coal handling system and limestone handling

system, Stacker and re-claimer - Indoor & Outdoor.

Mar Al Hassan Engineering Co SAOG.

2007-Aug Sr. Construction Engineer - Mechanical

2008 1x1,000 MW CCPP, S.A.P.P, OMAN

Role and responsibilities:

Execution of equipment and manpower utilization chart

to all engineers with respect to sequence and priority

of jobs, detailed work schedule to every engineers,

allocating right person to right job, claim of extra

works, interface coordination, maintaining the invoice

billing register, execution and monitoring the stores

department on inventory and asset report, conducting

on job training and its reports.

Lead Engineer for all types of activities which

includes piping and its supports, Steam generator

pressure parts, static & rotating equipments and heavy

structures at shop fabrication, site erection,

alignment, hydro testing, preservation, chemical

cleaning, pre-commissioning, commissioning, punch

points and warranty defects on both construction side

and QA/QC side.

Updating and monitoring the calibration status of

inspection, measuring and testing instruments,

Coordination with QA/QC department for conducting

NDT's to site jobs, Developing PQR and WPS, Preparing

and submission of TOP documents

Inspection and witnessing of shop fabrication, material

and equipment's received from vendor preservation of

equipment's at storage yard.

Inspection and witnessing of site construction

activities as per the approved Inspection and Test

plan.

Reply to NCR's, taking corrective action for the

complaints from the client, regular site monitoring and

daily progress review meeting with engineers,

maintaining and preparation of delay analysis report

for project delays, Preparation of acceleration

schedule for project delays, offering Inspection

request to client after verification.

Coordination to planning department for preparing the

master schedule, Project schedule, man hours curve,

Progress curve, organization chart, staff schedule,

equipment schedule, overall project curve, performance

targets with respect to Plan Vs Actual.

Coordination with EHS officer and to ensure zero

accidents and execution of safety activities through,

Daily toolbox meeting, weekly safety audit, display of

safety signs to make awareness to employees.

Assistance to carry out the AGC test, house load

operation test, load rejection test, turbine over speed

trip test and performance test, Load ramping test,

Stand by equipment changeover test, Generator rated

output test.

Areas covered under direct supervisions in CCPP are :

Diverter damper, bypass stack, inlet duct, HRSG with

supplementary firing system, outlet duct, main stack,

pipe rack areas, gas receiving station, gas storage

tank area, Compressor block, steam turbine area etc.,.

Nov Spic Jel Engineering Co

2004-Feb Assistant site manager - Mechanical

2007 1x900 MW CCPP & Desalination plant, Dubai, UAE

Key activities:

All the activities mentioned in the above CCPP of OMAN

+ the below mentioned activities and some new areas are

handled by me.

Preparation of Billing curve, Revenue curve,

Expenditure curve, Cost control report and list of

approved subcontractor- supplies.

Lead Engineer for Boiler and Auxiliaries erection and

commissioning which includes all types of piping,

Modules, Structure & Casing, Diverter damper, bypass

stack, inlet duct, Supplementary firing system, outlet

duct, main stack, static & rotating equipments and

skids with hydro testing, preservation, chemical

cleaning, pre-commissioning, commissioning, attending

of punch points and warranty defects, preparation and

submission of TOP Documents

BOP package erection and commissioning which covered

are pipe rack areas, gas receiving station, gas storage

tank area, DM plant, Compressor block, steam turbine

area, feed pump station and fuel oil handling system.

Jul - Nov Senior Mechanical Engineer

2004 2x100 MW, Thermal Power Station Rehabilitation, Ennore,

Tamil Nadu, India

Lead for Erection.

Renovation & Modernization of Coal fired Power Plant

Replacement of Boiler pressure parts, Ceiling Girders &

Buck stays

Repairing of Main column structures, Bracings and

Erection

Internal & External HP Piping

Burner modification (Low NOx System)

Co-ordination with QA/QC department for NDT such as RT,

MPT, DPT, UT.

Feb 2002 - Resident Engineer for Boiler, Auxiliaries and BOP

Apr 2004 Systems

1x 250MW, Thermal Power Plant, Zero unit, Tamil Nadu,

India

Key Activities :

Co-ordination with QA/QC department for NDT such as RT, MPT, DPT, UT Inspection,

Erection, hydro testing, chemical cleaning,

preservation and commissioning of main boiler.

Erection of coal mill, air ducting, re-suction ducting

with refractory works, PC piping and coal Burners

Equipments & Piping in balance of plant areas such as

DM plant, CHS, CMB plant, AUX Boiler, Compressor house,

FOH plant, Effluent treatment plant, HVAC Plant., AH

System, CEMS

Operation of unit until FAC

Warranty period

Assistance to carry out the AGC test, run back test,

house load operation test, load rejection test, turbine

over speed trip test, condenser vacuum test, Auto fire

fighting test and performance test, Auto cold start up

test, Auto Hot start up test

Maintaining the HSE and all the necessary

documentations as to the requirement of company

procedures.

Feb 2000 Mechanical Site Engineer for Boiler, Auxiliaries and

-Feb 2002 BOP Systems

2x210 MW, Thermal Power Station-I, Exp-Project,

Neyveli, Mecon, Tamil Nadu, India

Key Activities:

Review on engineering design from EPC side.

Erection and commissioning of Boiler pressure parts

which includes Drum, Water wall, Super heater,

Economizer, De-Super heaters, Headers. All types of

supports, Hydro testing, Chemical cleaning and

Commissioning.

Co-ordination with QA/QC department for NDT such as RT, MPT, DPT, UT Erection of coal mill, air ducting,

re-suction ducting with refractory works, PC piping and

coal burners.

Erection of bunker bay structures, turbine bay

auxiliary structure, heavy trusses, purloins and

miscellaneous structures.

Erection and commissioning of balance of plant areas

such as DM plant, CHS, WWT plant, Compressor house, FOH

plant, HVAC Plant., AH System

Maintaining the HSE at site

Jul 1999- Site Engineer- Mechanical

Jan 2000 HINDUSTAN PETROLEUM CORPORATION LTD. Andhra Pradesh

Key Activities:

Fabrication, Erection and commissioning of all types

of refinery piping such as critical piping,

non-critical piping, rack piping, underground piping,

core and Jacket piping, cement piping, FBE coated

piping. (Fusion Bonded Epoxy Coating). in sulphur

recovery unit as per API standards.

Installation of rotating equipments.

Attending major shutdown works in Crude distillery

units

Co-ordination with QA/QC department for NDT such as RT, MPT, DPT, UT.

Submitting Daily labor report to planning department

Maintaining the quality as per ISO 9002 Procedures.

May 1996 Site Engineer - Mechanical

-May 1999 Sulphur Recovery Unit, Manali, Chennai &

Ammonia Plant, NFCL, Kakinada, Andhra Pradesh

Key Activities:

Fabrication and erection of all types of refinery

piping such as critical piping, non critical piping,

rack piping, underground piping, core and Jacket

piping, cement piping, FBE coated piping. (Fusion

Bonded Epoxy Coating). in sulphur recovery unit as per

API standards.

Installation of rotating equipments.

Fabrication and erection of all types of piping

supports

Fabrication and erection of pipe racks

Hydro testing and commissioning of plant

Fabrication and erection of all types of piping with

supports in ammonia plant.

Operation of energy supply systems of ammonia plant

All the documentation works carried out as per the ISO

9002 procedures.

Co-ordination with QA/QC department for NDT such as RT, MPT, DPT, UT

Apr 1995 Operation Engineer

-Mar 1996 6x50MW, 3x100MW Thermal power plant, NLC, Tamil Nadu,

India

Key Activities:

Operation and maintenance of Turbine

Operation and maintenance of Boiler

Operation and maintenance of CHS

Operation and maintenance of BOP

Feb - Oct Supervisor

1993 4x210 MW, Stage-II, Thermal power station-II, Neyveli,

Tamil Nadu, India

Key Activities:

Erection of boiler pressure parts, external piping.

Installation of Insulation and refractory works

Erection of boiler bunker bays

Hydro testing of piping.

Co-ordination with QA/QC department for NDT such as RT, MPT, DPT, UT

Jul 1990 - Supervisor

Nov 1992 4x210 MW, Stage -II, Thermal power station-II,

Neyveli, Tamil Nadu, India

Erection of electrostatic precipitator.

Erection of heavy structures

Erection of underground piping

Erection of ducts

All the documentation works as required by the company

procedures

Contact this candidate