Quality Assurance

LAMBERTO H. BALDAZO JR.

**** ********** **. *** ***** CA 94583

Phone No. 925-***-**** or 925-***-**** . ***************@*****.***

QUALIFICATION PROFILE:

Highly analytical, performance driven engineering professional with a

proven ability to perform the assigned tasks in a precise and timely

manner. Well versed in a variety of common operating systems, applications

and other programs with the ability to learn and master new tools and

technologies quickly. Broad knowledge and experience in manufacturing set-

up with high level of achievements in problem solving analysis and

techniques.

PARTIME JOB EXPERIENCE:

Target Corporation, 2610 Bishop Dr. San Ramon, Ca. 94583

October` 2011 - December` 2011

Backroom Associate

. Keep merchandise organized and accessible.

. Work as part of a fast and accurate Logistics team on pulling out

stock for the sales floor requirements.

. Quickly and accurately respond to merchandise request as needed by

customer.

. Using Personal Data Assistant (PDA) for locating stocks and back-

stocking of items not sold.

Downtown Consignments, LLC. 1098 A St. Hayward, Ca. 94541

May` 2010 - June` 2013

Cashier/Sales Associate

. Demonstrate how products are used and its specifications.

. Work on different aspect of retailing as to assisting customer on

related items and cashiering.

. Conduct inventory of stocks, promotion of product to company website's

and keep items in clean and orderly manner.

. Used of Liberty Consignments Software and other office machine, tools

and equipments.

PROFESSIONAL EXPERIENCE:

Proteus Digital Health, 3956 Point Eden Way Hayward, CA 94545

November` 2012 - Present

Assembler 4 (Ingestible Event Marker -IEM)

Responsible for performing production activities on IEM (Ingestible

Event Marker) Assembly line. This includes various assembly, inspection

analysis, test processes, statistical documentation, machine set-up;

calibration, troubleshooting and operation to produce high quality product

in a short amount of time. Controls and Instrumentation, Equipment

Maintenance, Manufacturing Experience, Manufacturing Quality, Mechanical

Inspection Tools, Tooling, Safety Management, Quality Focus, Power Tools,

Judgment, Decision Making.

. Prepares work to be accomplished by studying assembly instructions,

blueprint specifications (BOM), and parts lists; gathering parts,

subassemblies, tools, and materials.

. Assembles components with Miniature IEM Tablets (MIT) by examining

connections for correct fit, product specifications and orientation,

dimension, thickness, weight and visual qualifications.

. Conduct Visual inspection using high powered microscope at 3X

magnification for Ingestible Event Marker (IC`s on flash sheet), with

tabulated data on travel sheet (DHR).

. Verify and Tabulate paper works if filled out accurately and in

accordance with cGMP requirements.

. Set-Up and Operates various type of automated equipment, machine with

parameter setting (Mauhlbauer IC pick and place, Coating Dispenser,

Ovens, Dry Boxes, Vacuum Wands, Tablet Press Machine, Sheet Cutter).

. Familiarize with FDA regulatory activities and Safety Practices

conducted on an internal and external audit.

. Keeps equipment operational by completing preventive maintenance;

following manufacturer`s instructions, Built of Materials,

troubleshooting malfunctions; calling for repairs.

. Maintains safe and clean working environment, by conducting line

clearance of work station, complying with standard operating

procedures, rules and regulations.

. Contributes to team effort by accomplishing related results, process

improvement, and quality effectiveness as needed.

Nikon International, Inc., Gen Luis St. Bagbaguin, Valenzuela, Philippines

February` 2007 - May` 2010

Research and Development Process Engineer (Electronic Home Appliances)

Provide Support to the Manufacturing Department and in Research and

Development on improvement of product Design, Efficient Production flow

through Process Improvement (Ergonomics), Product quality conformance to

specification, Machine Set-Up parameters and Efficiency, 5M+E Variations

effectiveness which promptly resolves concerns and satisfies end consumers

for all electronics appliances product.

. Conduct Time and Motion Study for the existing models as well as the

new propose product for costing, manpower capacity requirements and

materials needed.

. Design Process flow and conveyor set-up with designated manpower

balancing, and provided jigs and tools based on Time and Motion Study

at Plastic Injection Machine and Assembly Line.

. Document any technical changes, process improvement, product

evaluation, jigs design, Work Instructions and Procedures and Built of

Materials (BOM) as per endorsement to Assembly and Quality Assurance

Department.

. Performs analysis of Process and Product related problems through

experiments, data gathering and initiates corrective and preventive

actions to eliminate the root source of the problem.

. Acts as champion of Statistical Process Control (Graphical Analysis,

Pareto of Defects, Control Limits, Check Sheets, FMEA, 8D Analysis and

Design of Experiments) in his area of responsibility, and provides

technical sourcing for alternative materials or components.

. Developed preparation techniques of product pro-to-type after the

approved sample design.

. Involved in product design and modification using Solid Works Software

at Research and Development Department.

. Analyze Original Equipment Manufacturer (OEM) product and machine and

prepare control plans and procedural work instructions on its setting

and applications.

. Establish and implement process, tooling, equipment and quality

control methods to optimize the manufacturing operation.

. Work with Engineers, Manufacturing Operation and Quality Assurance

Department on continuous improvement projects.

Nanox Incorporated (ISO: 9001), Clark Special Economic Zone Pampanga,

Philippines August` 2002 - October` 2006

Back Process Engineer (Liquid Crystal Display Division)

Responsible for the overview, evaluation, implementation and

improvement of Process conditions or product specifications in order to

achieve yield targets, Product Quality Performance and optimum utilization

of manpower, Methodologies, Equipment and Materials on Chip on Glass, Thin

Film Transistor and other Liquid Crystal Display components at Back

Processing Department.

. Constantly reviewed data gathered from production line to determine if

the processes need to be improved.

. Assessed the adequacy of engineering equipment such as LCD Pin

insertion machine, UV Machine, Conveyor and LCD Testing equipment.

. Modification of Process Work Flow at COG Back-Pin Line Section from

Sitting to Standing Operation.

. Established New Twisted Nematic Process Line from start-up to full

operation.

. Closely communicated with customers and Next Process for better

product and yield improvement.

. Played integral role in the set-up of the Quality Management System

for the Department ISO 9001 certification.

. Spearheaded in the planning of floor lay-out for production assembly.

. Qualified direct and indirect materials and parts from our vendors.

. Involved in KAIZEN (continuous improvement) conducted on a monthly

basis and in Quality Improvement Circle for total quality awareness.

Solid State Optronics (ISO: 9001), Legaspi St. Maybunga Pasig City,

Philippines April` 1996 - April` 2002

Production Supervisor (Wire Assembly Products for Hard Disk Drives and

Solid State Relays)

Monitoring and Control of all production activities, resources and

manpower to ensure continuous and efficient work flow, meet productivity

requirements that will satisfy the prescribe quality of the customer and

delivered in accordance with the agreed plan.

. Sets Target Output, Quality Performance, and Yield Effectiveness and

deploys to his/her subordinates for compliance.

. Monitors the status of Work In Process (WIP) and other performance

indicators and compares against planned schedule

. Coordinates with support groups for the necessary corrective actions

in process or equipment, problems hampering production flow, the same

coordination are done for the training needs of his/her staff and

production operators.

. Plans for more effective ways of machine utilization's, manpower skill

development and over-all improvement in operations that will benefit

the company as well its personnel.

. Motivates his/her staff trough counseling skill development and

training to positively contribute to the Departmental goals and

objectives of the company, its mission and its General Operating

Procedures.

. Encourage participation in Total Quality Management (TQM) oriented

activities to sustain attitude on customer's orientation and

development of positive company values.

. Coordinates with the rest of the members of the Business Division and

other Departments for projects with cross-functional membership, which

is directly responsible for each stations performance in terms of

Quality, Productivity, Materials and Manpower utilization, Personnel

discipline, Safety and Environmental compliance.

. Imposed the adequacy of engineering equipment such as the Lumonics

Excimer Laser, Rapid Automated Lead Former (RALF), Die Bond and Wire

Bond machines to cope with production and quality requirements.

SPECIAL SKILLS:

. Computer Applications: Solid Works, Microsoft Office (Word, Excel,

PowerPoint, Access, Visio and Outlook Express), Adobe Photo-shop,

Corel Draw 9, Operating System such as Windows XP, Windows Vista,

Windows 7.

. Electrical Engineering: Design of Dwelling Units Electrical Plan,

Electrical Installation, Material Assessment and Estimation.

. QA/QC Tools: Applications of Statistical Process Control,

Machine/Process Capability Study (M/PCps), Failure Mode and Effect

Analysis (FMEA), Time and Motion Study, Used of Acceptance Quality

Level-AQL Sampling (Military Standard, Parts Per Million-PPM), Kaizen

and Japanese 5`S + 1, Just In Time Productivity (JIT), Lean

Manufacturing and ISO: 9000 Documentation and Assessment, 8 Discipline

Analysis, Good Manufacturing Practice Regulations (GMP), Material

Requirements Planning (MRP), Quality Sampling Methodology, Strong

Organization and Communication Skills.

. Machine and Equipments: Knowledge in the operation/setting of the

following machine and equipment such as Patton Engineering Wire

Twister, Lumonics Index 800 Excimer Laser Machine, Rapid Automatic

Lead Former, FB-118A Wire Bonder, AD809-00 ASM Automatic Die Bonder,

X4 Measuring Instrument, Hakko Manual Soldering Machine, Bausch and

Lomb Microscope, Vernier Caliper, Carbon Printing and Pin Insertion

Machine for LCD, Jonwai Thermoplastic Injection Machine, Pneumatic and

Hydraulic Press Machine.

EDUCATION :

- Graduated Bachelor of Science Major in Electrical Engineering

Polytechnic University of the Philippines, Sta. Mesa Manila Philippines

Contact this candidate