Dcs Control Room Operator

[pic]

MR.DENALD ROBERT

POST APPLIED FOR: DCS Operator / Sr.Production Operator

Postal Address : Rajakrishnapuram

Thirunelveli - Dist,

Tamil Nadu - 627114,

India.

Phone : On duty - +964********** (M)

Off duty - +919********* (M) / +919********* (H)

Mail ID : ****************@*****.*** /

*********@*****.**.**

LinkedIn :

https://www.linkedin.com/pub/denald-robert/18/355/49a

Summary

14 years of experience in Oil & Gas Field Operation in

Kurdistan, Qatar, and Indian Oil and Gas fields in Production,

Process, Plant Start-Up & Normal shut down, FPF Operation,

Precommissioning and Commissioning Operation, DCS Operation, Well Site

Operation in Offshore and Onshore Facilities.

CAREER HISTORY

1. Crescent Petroleum (Kurdistan-Onshore) From December 2009 to Till Date

Position: Control Room Operator

Process: EPF from Gas Well and LPG/NGL Production from Natural Gas

2. Qatar Petroleum Development (Qatar-Offshore) from May 2007 to November

2009

Position: Lead Production Operator

Process: Crude Oil Production from Oil Well

4. Cairn Energy India Pty Ltd (India-Onshore) from August 2006 to April

2007

Position: Production Operator

Process: Crude Oil Production from Oil Well

5. Reliance Industries Ltd (India-Refinery) from November 2004 to August

2006

Position: Field Operator

Process: Gas Plant

6. Gas Authority of India Ltd (India-Onshore) from May 2001 to November

2004

Position: Process Operator

Process: LPG Production from Natural Gas

7. Oil and Natural Gas Corporation Ltd (India - Offshore) from July 1999 to

April 2001

Position: Production Operator

Process: Crude Oil Production from Oil Well

TECHNICAL EDUCATION BACKROUND

. B.Tech - Bachelor Of Chemical Technology from Rajasthan Vidyapeeth

University

. D.Ch.T - Diploma in Chemical Technology from State Board Of

Technical Education

HONORS & AWARDS

. Bronze Award for safety Suggestion from Qatar Petroleum

development on 2008

. Second Step Safety Award from Crescent Petroleum on 2011

FIELD EXPERIENCE

14 years of oil and Gas Field PROCESS and PRODUCTION Experience in the

following Fields:

. Well head & Process Platforms

. Crude Oil Stabilization Unit

. Oil & Gas Gathering Station

. Crude Oil Pumping Station

. Gas Dehydration Unit (Tri-Ethylene Glycol)

. Gas sweetening Unit (Methyl Diethanol Amine)

. Gas Injection Unit

. LPG Unit

. Water Injection Unit

. Gas Turbine Generator

. Waste Water Treatment

. Fire Water Pump House

. Utility Units

Familiar With

. Precommissioning / Commissioning Operation

. Surface / Exploration / Production Well Testing Operation

. High Pressure / Sour gas Field

. Plant Startup and Shutdown

. Permit to work system

TRAINING & COURSES

. Helicopter Under Water Escape Training

. Sea Survival Training

. H2S Awareness and Breathing Apparatus Training

. First Aid Training

. Authorized Gas Tester

. Advanced Fire Fighting Training

. Defense Desert Driving Course

. Confined Space Entry

. Near Miss Reporting

LANGUAGES

. Tamil - Mother tongue

. English - Fluent written & spoken

. Hindi - Fluent spoken

PERSONAL

Date of Birth - 26th MAY 1979

Nationality - Indian

Marital Status - Married

Community - Roman Catholic

Passport # & Validity - Passport No: J5650168

- Issued at: Madurai

- Valid up to: 23/01/2021

ECNR (Emigration clearance not required)

JOB HISTORY

Equipments Handled:

DCS (Distributed Control System), SCADA (Supervisory Control

and Data Acquisition), MIDAS (Multi Input Data Acquisition System) and PLC

(Programmable Logic Control system)

Gas turbine driven Centrifugal compressors, Electric motor driven

compressors (centrifugal, reciprocating), Molecular sieve Absorbers, Direct

fired heaters (Natural and Forced draft), Fractionation Columns, Hot oil

system, Methanol injection system, Waste heat recovery unit, Adsorbers,

Regenerator, Separators (vertical, horizontal), knock out drums, Chillers,

Heat exchangers (plate-fin, plate-frame, aerial coolers, shell and tube),

Filters, pumps (centrifugal, reciprocating, etc.), Storage tanks (Floating,

cone, dome roof), distillation columns etc..

Well head and unmanned platforms:

Operation of X-Mass tree (CAMERON, FMC, CAMCO & BHEL), Actuator

operated Master valve and Wing valve, SSSV (DHSV), annulus pressure

bleeding operation, panel board operations (BAKER, OTIS, BRISCO &

PETROTEC), Flow line choke changing and adjusting, Flow line PSL & PSH

switches, FTHP well equalizing, gas lift injection wells, Test separator

handling, Well testing, BDV panel operation, orifice changing in the flow

lines (oil, gas & water/ DANIEL), Flow and pressure recording (IIT BURTON,

FOXBORO & ROSEMOUNT), isolation and hand over the wells to well service for

perforation, Acid job, well cleaning, wire line operations such as SSSV

removing, Bottom hole sampling, Reservoir study, down hole pressure

analysis.

Commissioning Responsibilities:

Air Blowing, Hydro testing, Reinstatement, Preparing Punch List

according to P&ID, Vessel inspection, chemical cleaning, Quick Flushing,

Steam Blowing ( Conformity By Using Target Plate ) and checking of all

utility points Commissioning and Startup activities like Preparation of

Operation test, Functional tests of Pumps, Checking of Inter-locks, Leak

Test, inertizing and Drying out the system, Stroke checking of control

valves, Transmitters and switches, Gas Detectors, Fire water loop checking

with help of instrument persons, Flare Header commissioning, Line up of

utility lines, Amine and glycol and hydro carbon lines.

Crude Stabilization Unit:

Handling 3 Phase Separators, oil reading & orifice changing,

Differential pressure reading. HP, MP & LP Separators handling, degassing

vessels & skim tank handling, well fluid oil, gas and water Level, Pressure

maintenance in Control Panel operation LCV, PCV operation & controller

operation. Oil sample taking BS&W checking Demelsifier & Biocides Injection

Pump operation.

Condensate Fractionation Unit:

Surge Drum operation, Condensate Filter operation, LEF/Deethanizer

Column operation, LPG/Debutanizer Column, fuel gas operation, Burner

operation, Knockout drum operations, MP, LP Condensate flash drum

operations, C1 & C4 Separation, Stream Treating, Heating oil Recovery

unit operation, C3 & C4 Separation, LPG Sphere operation, NGL Separation,

Temperature Maintenance, etc.

Separators:

Operation 2-Phase/ 3-Phase Separators, Level, Pressure Checking, Flow

Checking Changing The Orifice Of Gas Lines. Operation of Orifice Chambers,

Test Separator Operation, Well Diversion and Manifold Operation. Well Chock

Bean operation (Fixed & Adjustable) Water & Oil Flow Meter "0" Checking

(Totalizer, Turbine Flow Meters). Stock Checking Operation of PCV, LCV, FCV

In Field Operation, And Sampling of Oil Water, Gas & Chemicals.

Heaters & Reboilers:

Start Up Operation Of Damper, Burners. Filter Changing Operation,

Operation Hot Oil Heaters, Glycol Reboiler System and Hot Oil Filters

Change Over Operation. Chemical Injection System Handling Of Exchangers

(Shell & Tube, Fin Fan Coolers, Heat Exchanger, Condenser, Intercooler.

Pumps:

Operation of Single Stage/Multi Stage Centrifugal Pumps and

Single/Multi Stage Reciprocating Pumps. Piston, Screw, Gear Pumps

Operation. Vacuum Pumps And Chemical Dosing Pumps, Submersible Pumps,

Turbine Operated Pumps and Start Up Operation Of Generators.

Gas Compressor Unit:

Handled different types of Gas Compressor (Reciprocation, Centrifugal

& Screw Type) Gas Compressor Start up & Shut down, Cylindrical lube oil

Maintenance, Compressor unit pre lube oil level MTCE, engine crankcase oil

level maintenance, Coolant water level RPM setting, inter collar

operation, Temperature maintenance, Scrubber pump operation Fuel gas Filter

separator operation & Isolation, Recycle, PVC operation. Temperature

logging Suction, Discharge valve leaking. Engine cylinder function,

Cylinder fire order, Fuel gas splurging, Cooled water supply SDV & BDV

operation, Trouble shooting.

Gas Dehydration Unit:

Familiar with Gas Gathering Startup & shutdown, Glycol Pump Operation

- Closer separator handling and temperature maintenance conductor handling

reboiler operation pilot ignition system operation - TIC operation Reboiler

operation, Fuel gas filter separate operation, Flash drum, Sock filters,

charcoal filter operation and isolation - Reflux drum and still column

temperature maintenance - PH value maintenance.

Gas Sweetening Unit:

Familiar with Startup normal shut down, MDEA Pump operation,

absorber, Catridge filter, charcoal filter, surge drum, Stripper column and

H2S Analyzer, Lean/Rich amine exchanger, flash drum, reflex drum.

Pigging Operation:

Operation of Pigging (Receiving And Launching) In All Gas, Oil &

Water Pipelines. Using Foam Pig, Intelligent Pig, Mechanical Pig with

Brush, Chemical Pig.

Valves & Switches:

Handling Of Pressure Control Valves (PCV), Level Control Valves

(LCV), Flow Control Valves (FCV), Blow Down Valves (BDV), Shut Down Valves

(SDV) Pressure Safety Valves (PSV), and Auto Drain Valves. Pressure

Switches (PSL & PSLL), Level Switches (LSL & LSLL)

Chemical Injection:

Handling Of Chemical in De-emulsifier, Reverse

Demulsifier, Pour Point Depressant (P.P.D), Wax Depressant, Oil Corrosion

Inhibiter, Scale Inhibiter, Gas Corrosion Inhibiter, Antifoam, P.H Control,

Methanol, Acid, Caustic and Mercaptain.

Utilities:

Operation of single and multi stage instrument air compressors

(KIRLOSKAR-3687M3/HR, KHOSLA-786 M3/HR), Nitrogen PSA system, Inert gas

compressor (DRESSOR RAND - 633 NM3), Cooling tower (Induced draft),

Chemical injection skid such as (PPD Emulsifiers, Biocide, Corrosion

inhibitor)

Fire And Gas Equipment Handled:

Personal safety, Gas testing, Fire Fighting and First Aid Course, Dry

chemical powder and CO2 fire extinguishers, fire hydrants, fire water

pumps, fire water sprinkler systems, deluge valve, foam tank, fire& gas

panel, Automatic / manually release system, Fire, H2S and gas detectors.

Computer Skills:

Microsoft windows, word, excel and familiar in PowerPoint.

[pic]

(D.Denald Robert) pic]

Contact this candidate