Manager Service

ALI MOHAMMED

Mobile: India: **** 789-***-****

E-Mail: ***********@*****.***

TRAININGS AND EDUCATION

EDUCATION: B.E (FOUR YEAR DEGREE) PASSED IN 1993

CERTIFICATES: (IWCF - SUPERVISOR LEVEL VALID TILL 2015)

ELEMENTARY FIRST AID

FIRE PREVENTION & FIRE FIGHTING

PERSONAL SAFETY & SOCIAL RESPONSIBILITY

PERSONAL SURVIVAL TECHNIQUES

SUMMARY

> Professional drilling experience was gained over 20 year's career mainly

in the Middle East and USA. Most of assignments were on Well/Drilling

Engineering, Well Control, Directional Engineering

and Project Management for land rigs and offshore deep and shallow

wells, HPHT, OBD, MPD/UBD/ Air Drilling/ Vertical, Directional, Multi-

lateral, ERD and Horizontal Wells. Maintain professional client

relations with operator and service company representatives.

Ensure Rig Management System and HSE policies and procedures implemented

and enforced Specialties: Drilling Project Management, Expert in

Directional Drilling Technology, ERD/Well Reports/ Planning and

Tendering for new projects, Personnel supply, Training and Team

Building.

> Experience in circulation system like Gases, mist, foam, Gas lift system,

Annular injection, drill pipe injection, Cryogenic nitrogen, Pressure

while Drilling, Jars, Drill pipe rubbers, Equipment selection, Well

control Strategy, personnel selection, Operational procedures, HSE, Cost

Estimates, Drilling parameters, UBD Hydraulics, Well trajectory and

directional issues. Environmental aspects and Safety procedures,

PROFESSIONAL WORK EXPERIENCE

RIG MANAGER/Drilling Engineer - INDUSTRIAL ENERGY CO

DEC 2010- TILL DATE

> Type of wells: ERD, MPD and UBD drilling with 12 " hole size,

Experienced with 8 " & 12 " Geo-Pilot Rotary Steerable System to drill

builds/turns, land wells, & lateral sections. Drilled extended reach

horizontals, Drilled medium radius wells up to 65 /100 ft, Experienced

with performance drilling, re-entries, sidetracks, multi-lateral well.

> Drilling Problem Solving (Lost Returns, Stuck Pipe, Hole Instability);

drill String Inspection for ERD Applications; open hole and cased hole

Supervising Rig operations Oil and Gas wells with a depth range of 12,000

Feet to 17,000 Feet. Drilling deep High pressure and High temperature

Gas wells. Managing day to day operations coordinating with contractors,

service companies, and other related functions successfully.

> Underbalanced drilling commonly called Managed Pressured drilling, Common

Conventional drilling problems, lost circulation, differential sticking,

Light weight drilling, Nitrogen foam etc.,

> Underbalanced drilling programs, MPD operations and personnel on well

site planning operations and procedures, Analog Data, Evaluation, Risk

assessment, UBS Well type matrix, Cost estimate, feasibility, Formation

damage, Fluids system, Gas lift system. Drill pipe Injection, Annular

Injection, Flow modeling etc.,

> Checking of drilling fluids, Well control, Three Phase Separators, Four

Phase Separators, Pore pressure, Nitrogen membrane systems, Analysis on

stuck pipe, Works with foam, multiphase fluid AND Reservoir Screening

tool.

> Rig Up and down equipment. Surface well testing, ESD testing, Nitrogen

injection line testing, Liner and perforation Equipment selection and

snubbing.

> Plans, reviews and directs the receipt of materials and spares required

for ongoing and contingent drilling operations on assigned rig. Includes

planning requirements, reviewing and approving field requisitions for

materials and consumables, directing the receipt/returns of

required/excess materials by assigned Materials/Accounting Supervisor to

ensure availability of optimum level of materials and spares on assigned

rigs.

> Experience in onshore drilling supervision, Work over and drilling

Operations, MWD and Mud Operations, Short radius wells. Responsible for

10-15 personnel, maintaining equipment, ordering supplies, training new

personnel on safety and work habits, having good communication & public

relation with company personnel, responsible for all records and paper

work, responsible for rig expenditures, training personnel on well

control(holding drills)and holding training course each month on

different types of working conditions (HAZOP/HAZID confine space,

hearing, proper lifting, etc.)

> Coordinated site drilling activity, and transport, maintenance. Technical

assistance drilling and special operations.

Assurance and the realization works of drillings in conditions of

quality as per well project. Train personnel for safety job and well

control eruptions. Coordinate activity of reparation and maintenance the

plant of drilling

TOOL PUSHER/RIG MANAGER

NOV 2004 - OCT 2010 BAKER HUGHES INC HOUSTON- USA

> Managed and supervised rig employees oversee all drilling rig operations

from setting up through drilling process to completion of drilling

process, constant monitoring and reporting of all drilling data made

immediate major decisions concerning various situations, including blow

out prevention, safety, etc. Managed turnkey and safety operations

under in South Texas. Oil production and field development control.

Experienced in development the area ERD wells, multi horizon oil field, securing for production program, monitoring of development, producing

and injection wells, optimal pumping conditions control.

> Work over and re-completion of wells identified in the approved Rig

Schedule

> Coordination with other departments (Materials & Logistics, Subsurface,

Finance, Production, HSE, IT etc)

> Supervise the execution of the drilling/Work over/testing/completion

program. Implementation of logging operations and witnessing the same.

> Monitoring well profiles as per requirements (both Geological as well as

technical). Daily monitoring and preparation of well-reports. Selection

and ordering of bits. Familiarity with operational/safety systems.

Prepare drilling program, liaise with service companies and drilling

contractor as required.

> Prepare regulatory submissions, and monitor progress of

review/approvals. Conduct internal peer reviews, rig move and pre-spud

meetings as required. Assist with service company contract preparation

and/or renewal. Provide operations support during drilling.

> Monitor performance, supervise and motivate rig team and service

companies. Review and approve service company invoices. Prepare detailed

end of well report, with emphasis on learning's, future improvements,

and time/cost

> Responsible for directing the actual operations of the drilling rig and

the work performed by the crews including setup, take down and moving,

along with the safety of the workers on the rig while in operation.

Responsible for completing daily reports, ordering necessary supplies.

Ensure compliance with safety requirements on the rig and respond to all

emergency situations.

DRILLER

MARCH 2001- OCT 2004 HOUSTON EXPLORATION CO, HOUSTON-USA

> Writing reports, Performance analysis & NPT tracking, Maintaining EOWR

daily summary, Updating general well files, Casing / liner tallies,

Cement, displacement & test volume calculations, Hydraulics and torque &

drag modeling / analyses (Well Plan), Witnessing pressure tests & leak

off tests, Implementing Drilling Supervisor's daily work instructions,

Working with rig crews & service providers to ensure expedite project

tasks.

> Supervised production operations; recommending work-over, pipeline

improvements and compression

> Company Standards & Company Technical Procedures. Full integrated

Drilling Contracts support & Technical evaluation of tenders. Prepare

detailed work programs and supervise critical well operations at the rig

site. Provide technical advice and support management, operations

Implement drilling programs

> Operate all equipment in a safe manner; maintain a clean, tidy and hazard-

free condition on the drill floor and associated area Monitoring the

well condition at all times. Maintenance and the safe operation of all

drilling equipment Carried out DST rig testing prior to production

> Ensure proper training of crew members and safe operations Delegating

daily tasks to workers and ensuring that work is completed . Adjusting

weight on bit, rotary and pump pressures to follow drilling parameters .

Conduct regular safety meeting and drills

> Actively involved in ordering material in timely manner as per well

program.

Coordinating material supply from different stores/departments /

companies.

Coordinating services e.g. directional drilling, fishing, drilling tools

DRILLER

NOV 1995- DEC 2000 TIG TESCO INTERNATIONAL - DAMMAM (KSA)

> Drilled &completed horizontal, multilateral, power water injector,

horizontal open hole & cased hole side track, exploration & development

oil, gas, water, high temp & high press deep(16000ft), shallow (1500 ft)

upper & lower completion, smart wells completion in Haradh, Shudgum,

Abqaiq, Uthmaniya, Dilam, Khurais & Nuyyimfields.

> Run & cemented different sizes of casings (from 7" to 30") with simple &

double stages, with blended &light cement, Run4-

1/2"&7"mechanical&hydraulicliners. Drilling with water base & oil base

mud with different oil & water ratio,

> Critical maintenance of Well Control Equipment, maintenance of mud

parameters and adherence to the safety norms of the company were very

critical to safe operations in those conditions.

> Involved in drilling high pressure gas field. Experienced and controlled

well kicks of very high pressure.

Rig moves have been so meticulously analyzed and time break downs of

concurrent and non critical operations carried out resulting in cutting

down the rig move to 50%.

> As drilling operations especially land operations are in a very remote

areas ordering materials, contingency plans for casings losses and

without losses and planning all service hands becomes so critical that

running operations without down time is a challenge.

ASSIST DRILLER

RAMSOL CONTRACTING CO - HYDERABAD (INDIA) (1994-1995)

> Well control procedure for water oil & gas well. Use of diverter for

shallow gas in surface hole.

Window cutting with weather ford whip stock & milling equipments.

Multilateral wells using BOT window master, weather ford /smith whip

stock & section milling tools.

Operate all equipment in a safe manner; maintain a clean, tidy and hazard-

free condition on the drill floor and associated area

> Monitoring the well condition at all times

> Maintenance and the safe operation of all drilling equipment

> Carried out DST rig testing prior to production

> Ensure proper training of crew members and safe operations

> Delegating daily tasks to workers and ensuring that work is completed

> Adjusting weight on bit, rotary and pump pressures to follow drilling

parameters

> Conduct regular safety meeting and drills

> Reporting all well conditions to the Toolpusher

> Making sure all work gets completed in a safe and efficient manner

> Partial & total loss while drilling, running casing & cementation jobs.

Stuck pipe in tight hole & formation swelling, section drilled with PDC

bit & with high ROP.

> Logging procedure in open & case hole, reservoir & the precautions

required during the jobs.

DST running procedure, packer setting, well flowing through flare line &

separator.

[pic]

Contact this candidate