IMROJ AHMED, B.Tech. in Instrumentation Engineering with 9+ years Exp.

E-mail: acck3b@r.postjobfree.com Contact: 006*-********* Skype:imroj.ahmed

JOB OBJECTIVE

Seeking assignments in Designing/Commissioning/ Operations & Maintenance/

Project Management with a leading organization preferably in a leading

industry.

STRENGTHS

. Competent & result oriented professional with an experience of over 9+

years in Project Execution, Installation, Calibration, Testing,

Commissioning, Instrument Systems & Control Systems; currently positioned

with SAC TECH(MALAYSIA) SDN BHD as PROJECT Engineer (Electrical &

Instrumentation) -PLANT ENGINEERING.

. Designing of HMI Screen, PLC logic. Preparation of control Loop diagram &

Loop check. Preparation of control flow chart.

. Well versed in Planning and Execution of Erection & Commissioning,

Installation, Inspection and Maintenance of various Electrical,

Electronics & Instrumentation Equipments, managing Design Engineering

Operations, Project Management and Costing in reducing downtime and

enhancing effectiveness of equipments.

. Expertise in Commissioning, Operation & Maintenance of Automation (PLC,

DCS, and DRIVES) & Electrical (Transformer, Breaker, MCC, Motor, and

switchyard) in Ferro alloys plant continuous running plant, CHP in Power

Plant.

. Adept at designing & implementing quality systems and procedures to

ensure strict adherence to quality parameters with understanding of all

aspects governing operational and production activities and up to date

knowledge of latest technological advancements, regulations/ guidelines

and statutory compliances in the industry.

. Experienced in project planning and execution, exceptional strengths in

striking perfect coordination with team and client to catalyze work

performance and ensure project execution within defined cost/time

parameters.

ACADEMIC CREDENTIALS

B-TECH (2000-2004): B.Tech in Instrumentation Engineering from Haldia

Institute of Technology (Approved by A.I.C.T.E.) Haldia securing 72.9%.

Passed XII (1997-1999): Under W.B.C.H.S.E. in Science Stream from Sarat

Chandra Sur Institute, Kolkata securing 76.7%.

Passed X (1997): Under W.B.B.S.E. from Asanda Adarsha Siksha Sadan,

securing 76.125%.

EXECUTIVE SUMMARY

I have commissioned Allen Bradley's automation system in various Ferro

Alloys Plants. I have around 9+ years' experience in Commissioning,

Operation & Maintenance of Automation (PLC, DCS, and DRIVES etc.) &

Electrical in Ferro alloys plant continuous running plant, CHP in Power

Plant.

. Having Designing, commissioning & Maintenance experience in Sinter

Plant, Sub merged Arc Furnace, Raw Material Handling Systems,

Refining Furnace, Rotary Kiln, Electric Arc Furnace, Gas Cleaning

Plant, Plant CCTV System, Plant communication & Paging System.

. Having thorough knowledge in Programming and Maintenance of PLC based

system for Iron & Steel plants, Various Panels and Field Instruments.

Worked with DCS- Microverse, PLC- ABB VERSION, and AB VERSION. SCADA-

RS View 32, InduSoft 4.4. LOGIC-RSLogix 500, HMI-PANEL VIEW

300.Conzerv Meters, Renu Gateway, Transducers.

. Testing, commissioning & maintenance of FURNACE Transformers, MCCs.

and Controls.

. Installation of cable trench, cable laying, dressing, protection &

testing of control cables.

. Maintenance of 220KV/33KV, 66KV/11KV sub-station, 2x40MVA/25MVA Power

Transformer., 33 KV/11KV Switchgears, HT/LT panels, 6 MVA/7MVA Furnace

transformers and other furnace control system.

. Programming and Maintenance of Drives (ABB ACS-550, Telemechnique,

NETZSCH).

. Maintenance & troubleshooting of Motors and Various field instruments

(like Pressure sensor, Level sensor, Temperature sensor, Limit switch,

Indicators, Vision 280 and Controllers etc.)

. Commissioning & maintenance of EOT Cranes, furnace controls, batching

systems, Gas cleaning plant, Briquette Plant (Usha Kiran System &

Koppern System, Germany), LT switchgears & all other control system in

a continuous process power intensive industry.

. Materials & manpower planning. Reduction of inventory & cost effective

maintenance. Erection and commissioning work, day to day maintenance

work of E&I dept, break down rectification etc.

. Enthusiastic and committed to maintain quality and efficiency. Fast &

self-directed learner, work effectively independently or as team

player.

WORK EXPERIENCE- 9+ YEARS

1.Working with SAC TECH(MALAYSIA) SDN BHD as PROJECT Engineer(Electrical &

Instrumentation) from June,2013 currently looking the project work of Asia

Mineral Ltd's Ferro Alloys Project in Malaysia & Business development in

India . Coordinating between client, design team, procurement team, sub-

contractor & vendors. Meeting with client & consultant to short out the

issues. Inspection of equipments. Testing & commissioning of plc &

electrical equipments & systems. Helping the marketing team for

International marketing. SAC is an EPC Company for Steel, Ferro Alloys, and

Mining & Aluminum industries.

2. TRF LTD as Sr Engineer Projects from September 2012 to April 2013. at

NTPC Barh site,2X660MW Thermal power plant.

3.DRUK FERRO ALLOYS LTD., . DFAL is having 21 MVA electric arc furnaces,

Gas cleaning Plant, 25 MVA power transformers, 66KV/11KV sub-station &

other auxiliary control to produce 13200 MT Ferro Silicon per annum.

DESIGNATION: Worked as a Instrumentation Engineer(Asst Manager) from MAY

2008 -Aug 2012.

4. ROHIT FERRO-TECH LTD.,, Orissa. RFTL is having 4X 16.5 MVA electric arc

furnaces, Gas cleaning Plant, Briquette plant, 2 X 40MVA power

transformers, 220KV/33KV sub-station and other auxiliary control to produce

Ferro chrome. DESIGNATION: Worked as an Asst. Manager (Electrical &

Instrumentation Engineer) from Sept 2006 to May 2008.

5. MULTI WEIGH SYSTEMS, Mumbai. MWS is a system house of Allen Bradley.

DESIGNATION: Worked as a Project Engineer from July'04 to August'06.

TECHNICAL SUMMARY

. Worked with DCS-Microverse, PLC- ABB VERSION, and AB VERSION. SCADA-RS

View 32, InduSoft 4.4. LOGIC-RSLogix 500, HMI-PANEL VIEW 300.Conzerv

Meters, Renu Gateway, Transducers.

. Designing of HMI Screen, PLC logic. Preparation of control Loop diagram &

Loop check. Preparation of control flow chart.

. Testing, commissioning & maintenance of FURNACE Transformers, MCCs. and

Controls.

. Installation of cable trench, cable laying, dressing, protection &

testing of control cables.

. Maintenance of 220KV/33KV, 66KV/11KV sub-station, 2x40MVA/25MVA Power

Transformer., 33 KV/11KV Switchgears, HT/LT panels, 6 MVA/7MVA Furnace

transformers and other furnace control system.

. Programming and Maintenance of Drives (ABB ACS-550, Telemechnique,

NETZSCH).

. Maintenance & troubleshooting of Motors and Various field instruments

(like Pressure sensor, Level sensor, Temperature sensor, Limit switch,

Indicators, Vision 280 and Controllers etc.)

. Commissioning & maintenance of EOT Cranes, furnace controls, batching

systems, Gas cleaning plant, Briquette Plant (Usha Kiran System & Koppern

System, Germany), LT switchgears & all other control system.

. Commissioning and Maintenance of Microverse Make DCS based system for

electrode control, batching, feeding system (RMHS), Raw material batching

system & GCP.

. Testing, commissioning & maintenance of 25 MVA Power Transformer, MCCs,

Controls, 6.04 MVAR capacitor banks, Gas cleaning plant.

. Maintenance of 66 KV substation, 25/5T EOT Cranes, Different rated & type

motors with MCC panels, feeding system (RMHS), Raw material batching

system, and VFD drives etc.

. Installation of cable trench, cable laying, dressing, protection &

testing of control cables.

. Testing & maintenance of 3 x 7MVA single phase Furnace transformers (T&R

make).

. Maintenance & troubleshooting of Motors and field instruments (like

Pressure sensor, Level sensor, Temperature sensor, Limit switch,

Indicators and Controllers etc.)

. Maintenance, repair & Calibrations of all the Instruments, batching

systems & equipments. Calibration of DP Transmitter, Level Transmitter,

Pressure Transmitter, Temperature Transmitter; Programming & Maintenance

of PLC (ABB, Alan-Bradley & Siemens) based system.

. Programming and Maintenance of Drives (ABB, Telemechnique, NETZSCH),

various Conzerv meters (EM 3460, ELF 3234, EM 6400 etc), panel meters.

. Maintenance & troubleshooting of Motors and field instruments (like

Pressure sensor, Level sensor, Temperature sensor, Limit switch,

Indicators etc.) Maintenance & Calibrations of all the Instruments,

batching systems & Briquette plant equipments.

. Testing & maintenance of 6MVA,7 MVA,11 MVA single phase Furnace

transformers (T&R make).

. Testing, commissioning and maintenance of different rated & type motors

with MCC panels, feeding system (RMHS, FPHS), Raw material batching

system. Maintenance of 3.8MVAR, 8MVAR capacitor banks.

. Testing, commissioning of Gas cleaning plant and controls.

Key Projects Handled

. Asia Minerals Ltd, Sarawak, Malaysia- 8x 33MVA SAF,2 x 5MVA EAF, 1 Rotary

Kiln, Sinter Plant, Raw Material Handling Systems, Gas Cleaning Plant,

Plant CCTV System, Plant communication & Paging System.

. Rawmet Ferrous Industries Pvt Ltd. Anantpur, Orissa-Numerical relays

(AREVA P921 (27,59N), P127, P120, ABB). Batching System, Furnace

Automation & Voltage Regulation.

. Rohit Ferro-Tech Ltd, Jajpur, Orissa-Batching System, Furnace Automation

& Voltage Regulation, Briquette Plant.

. Brg Iron & Steels. Angul, Orissa-Weigh Feeder Control System.

. Modern India Concast Ltd, Bisnupur-Batching System & Power Monitoring in

SCADA.

. SD East Bhutan Ferro Alloys Pvt Ltd, Bhutan-Batching System.

. JSPL: Ash Handling System-Works done: Programming the PLC system (DI, DO

& AI 60 approx.).

. MTPS (DVC)-Commissioning & Servicing of Ash Handling Panel.

. Bhushan Steel-Ash Handling System-Works done: Maintenance of the total

PLC system (DI & DO 100 approx).

. NALCO: Ash Handling System-Works done: Installing, Commissioning and

maintenance of the total PLC system.

OTHERS DETAILS

INDUSTRIAL TRAINING: At Damodar Valley Corporation, Mejia on Control &

Instrumentation of Thermal Power Station for a period of 6 weeks on

Distributed Control System, S.W.A.S.(Steam And Water Analyses System),

Boiler Instrumentation., Turbine Instrumentation.

COMPUTER PROFICIENCY: Operating Systems: MS DOS, Windows 9X, Win NT.

Software Packages: MS Office 2000. Software: AutoCAD, Corel Draw.

PERSONAL DETAILS

Date of Birth : 12/05/1982 Nationality : Indian

Gender : Male Marital Status : Married

Passport No : F6207073

Notice Period: 1 Month. Current Salary: USD 45000 per Year. Exp. CTC:

Negotiable+ Family Status.

Present Address: Bintulu, Malaysia

Permanent Address : Village -Mahammodpur, P.O-Habaspur, Dist -

Murshidabad. West Bengal, India.Pin-742135

I hereby declare that all information mentioned above are true to the best

of my knowledge and belief, Finally, I shall produce the entire Original

documents at the time of attending interview.

(IMROJ AHMED)

Contact this candidate