CURRICULUM VITAE
M. Sankara Rao
Fazuelbegpeta (Village) Gujarathipeta (Post)
Srikakulam – 532005 Andhra Pradesh, India
Mobile: 986-***-****
Email: acci8p@r.postjobfree.com
OBJECTIVE: Seeking for a position to effectively contribute in a progressive company, which has a challenging and
creative environment and offers ample opportunities for growth and personal development and helps to explore myself
and realize my potential
Application for: QA/QC Engineer (Inspection)
EDUCATIONAL QUALIFICATION:
• Graduation in Mechanical Engineering from AMIME-INDIA (sec-A & sec-B) Dec., 2000
• Diploma in Mechanical Engineering – June 1994
• NDT- Level II Certificate from ASNT in RT, UT, MPT, PT
• QMS/Lead auditor training course attended (ISO 9001:2008) form DNV
• Computer Proficiency: MS Office
WORK EXPERIENCE:
Dec. 2013 to Jan. 2013
Inspection Engineer, M/S Dat Enggserve Pvt. Ltd, Thane (W) Mumbai,
Attended DHDS SRU Shutdown jobs at M/s Bharat Petroleum Corporation Limited, Mumbai Refinery, Mumbai
Nature of work:
Attending DHDS SRU piping and Vassals Inspection jobs as per Clint scope
Stage wise Inspection of unit piping & equipment, Cross check as per GAD, P& ID and Isometric drawings,
As per design specification all piping loops/ packages (CS, SS, Low alloy steels, etc.) inspected and conformed the
spec. After UTG piping system corrosion analysis and thickness detection, All small bore attachments inspected by
hammer tested.
Internal Inspection of Vessels stage wise before cleaning and after cleaning and repair inspection,
Hydrostatic test witnessing and preparation of final documentation (ICR) for records,
NDT part: Witness and Review of SR Charts, Radiography film interpretation,
Aug. 2013 to Nov. 2013
QA/QC Lead
M/S Fabtec Construction Company Ltd.
Worked as a QC lead from M/S Fabtec Company at HPCL Visakhapatnam site,
Pre commissioning, Quality documents review and coordinating with PMC, Piping loops M.C, NDT & H.T. clearance,
SS material PMI Inspection.
May 2013 to July 2013
Inspection Engineer, M/S Golla Engineering Pvt. Ltd, EPC, Navi Mumbai,
Attended Propylene recovery unit (PRU) Revamp Project/ Shutdown jobs at M/s Hindustan Petroleum Corporation
Limited, Visakh Refinery, Vizag
Nature of work:
As per specification material inspection, Radiography film interpretation and quality documentation check.
Stage wise Inspection of unit piping & equipment, Cross check as per P& ID and as built of field modifications.
As per design Column Nozzles, TSR rings fit-ups & weld visual and modified nozzles hydro test witness.
February 2011 – April 2013
Inspection Engineer
M/S Aarvi Encon Pvt. Ltd, Visakhapatnam,
Third Party Inspection, Testing, Verification and Certification Company
Major jobs attended at M/s Hindustan Petroleum Corporation Limited, Visakh Refinery, Vizag
On stream Inspection of unit piping, Equipments like Drums & Vessels, Heaters, and Heat Exchangers and evaluation
of corrosion rating.
Attending T & I shutdown inspection Jobs for PRU unit piping at Visakh Refinery in May 2013,
Attending Pre T & I inspection Jobs for CDU-I unit, offsite piping & shutdown jobs for Heat Exchangers at Visakh
Refinery in April 2013,
Attending Pre T & I inspection & shutdown jobs for FCCU-IR unit piping & vessels at Visakh Refinery in August
2012
Nature of work:
As per specification raw materials Inspection
Stage wise inspection of piping fit-up, weld visual, NDT and Repair inspection and corrosion analysis,
On stream visual on Piping & Static Equipments and material UTG status checking.
Inspection of Heater coil, refractory, ducts, APH, plenum & attachments
Hydro Test witnessing of piping, pressure vessels, Heat Exchangers and Heater coils etc.
Witness and Review of SR Charts
Radiography film interpretation,
ICR report preparation (inspection completion report) was based on visual & UTG analysis,
Stage wise Inspection of Structural fabrication and alignment jobs checked as per drawing.
March-2012
M/s VELOSI LLC, Oman
Major T&I Inspection & Shutdown jobs attended at M. A. F. Refinery (Muskat), Oman
Nature of work:
Stage wise Inspection of Drums & Pressure Vessels,
Inspection of raw materials as per specification,
Repair inspection & NDT checking.
Hydro Test witnessing as per the design parameters,
Inspection completion report preparation was based on visual & UTG analysis.
February 2006 – December 2011
Inspection Engineer
M/s SGS India Pvt. Limited, Visakhapatnam
World’s Leading multinational Third Party Inspection, Testing, Verification and Certification Company
Major jobs done at M/s Hindustan Petroleum Corporation Limited, Visakh Refinery, Vizag
Inspection of Off-site Refinery Piping, Refinery Equipment and Piping Supports, Turnaround and Inspection
(Shutdown) of CDU-I, CDU-II, FCCU, VBU, DHDS and Merox units; Minor Projects
Attended inspection & Shutdown jobs at M/s. Indian Oil Corporation Limited, Panipat for CDU & Petrochem
Units
Attended inspection & Shutdown jobs at Oman Refinery & Petro Chemicals (Sohar Refinery), Oman Feb-2010
And also continues on stream visual inspection jobs attending in HPCL refinery, Visakhapatnam.
Nature of work:
Inspection of raw material, pipe joints fit-up and welding,
Hydro Testing of piping, vessels and Heater coils etc.
Inspection of Pipe track, equipment supports, tank ages and all types of structural fabrications,
Witnessing and Review of SR Charts and Pipe thickness gauging (UT),
Radiography film interpretation and evolution,
Inspection of Structural fabrication and alignment jobs,
Equipments and Tankages covered: Heaters, Exchangers, Vessels, Columns, Coolers, Cone roof Tank, Floating roof
January 2005 – 06
Engineer – Quality Control
M/s. Onshore construction Company, Ratnagiri
Company Involved in Fabrication, Erection and Commissioning of Petrochemical Equipments.
Worked on Vinyl Chloride Mono-oxide (VCM) Project – Client M/s Finolex
Inspection of raw materials, welding consumables, piping, pressure vessels, nozzles, structural fabrication works, as
built etc.
Stage wise inspection like Marking & cutting, edge preparation, forming, Layout, Fitup and Dimensional Check,
Witnessing of Mechanical tests(Tensial strength, Yield strength, Elongation), review of Chemical test reports as per
spec., Hydrotests, Painting, NDT, Preparation of WPS PQR and welder qualifications and quality documentation.
September 2003 – 05
Engineer – Quality Control
M/s. Metal Crafts Construction Company, Jaipur
Company Involved in Fabrication, Erection and Commissioning of Cross Country Piping
Worked on 150 Kms long cross country piping of SSPL Project, Jaipur –
Client M/s Indian Oil Corporation Limited
Inspection of Pipe Laying, Valves and structural fabrication works at Boosting Station
Visual, Dimensional Checks, Witnessing Hydrotests, Painting, review of test certificates, NDT, Preparation of WPS
PQR and welder qualifications and quality documentation
December 2002 – 03
Supervisor – Quality Control
M/s. Cortech International Pvt. Ltd, Ahmedabad
Company Involved in Fabrication, Erection and Commissioning of Cross Country Piping and Cathodic
Protection
Worked on 25 Kms long cross country piping of VSPL LPG Project – Client M/s Gas Authority of India Limited
Inspection of Pipe Laying, Valves and structural fabrication works at Boosting Station
Visual, Dimensional Checks, Witnessing Hydrotests, Painting, review of test certificates, NDT, Preparation of WPS
PQR and welder qualifications and quality documentation
October 2000 – 02
Executive Engineer – Works
M/s. Chandramouli Fabricators and Erectors, Visakhapatnam
Company Involved in Structural Fabrication and Erection
Worked on Coal Handling Plant of L & T, Parawada – Client M/s National Thermal Power Corporation Limited
June 1996 – 99
Maintenance Engineer
M/s. HIMSON Textile Engg. Industries, Surat
Company Involved in manufacturing of Synthetics Yarn machinery (SDS)
Worked in the field of precision machine maintenance, Preventive and Recondition works for CNC lathes,
Hobbing, drilling, jig bores, Rotating equipments Compressors, and all types of Gen sets.
July 1994 – 95
Trainee Engineer-Maintenance
M/s. TAPTI Industrial Engineers, Surat (Gujarat)
Company Involved in manufacturing of Synthetics Yarn machinery (SDS)
Worked in the field of precision machine maintenance, Preventive and Recondition works for CNC lathes,
Hobbing, drilling, jig bores, Rotating equipments Compressors, and all types of Gen sets.
PERSONAL PROFILE:
Father Name : M. Rama Rao
Date of Birth : 06-08-1972
Marital Status : Married
Nationality : Indian
Pass port. No : H2117962
I hereby declare that all statements made above are true to the best of my knowledge & belief.
Place: Visakhapatnam
Date: M. Sankara Rao