Maintenance Quality Assurance
Resume:
TYRONE UZZELL
Columbus, GA *****
accelp@r.postjobfree.com
EXPERIENCE
Field Engineer Associate ManTech International
Camp Taji, Iraq
Site Lead
. Operate and install elevated sensor systems associated with the BETSS-
C and RAID systems as assigned.
. Advises the Battle Commander assigned to my Area of responsibility on
the feasibility, functionality and capability of the system assigned
to me.
. Perform preventive maintenance checks and services on each system and
sub components IAW with operator, technical and training manuals.
. Provides training to soldiers on system functions, capabilities and
limitations.
. Troubleshoot system to repair faults, using troubleshooting
procedures and manuals.
. Troubleshoot fiber optics and make minor repairs within the fiber
optic network using troubleshooting tools to include Optical Domain
Refractometer (OTDR).
. Perform Human Intelligence Techniques while monitoring the system.
. Elevate security concern through the proper channels for further
evaluation.
. Perform persistent sector surveillance for Base threats, concerns and
possible perimeter breaches.
. Record maintenance faults and shortcoming to support personnel for
repairs or replacement.
. Maintain accurate shift log of incidents, maintenance issues, and
significant events for record.
. Responsible for the operations, maintenance and installation of BETSS-
C, Standard Ground Station with 80FT tower.
. Certified Operator on the ARDISS, Legacy/ RAID, and M-STAR satellite
systems.
. Erect, populate, and dismantle cable guided communication towers,
using various tension meters. Guide tower within tension
specifications.
. Perform analyses of system operations to ensure functional reliance.
. Experience in the operations of hardware, systems and components.
. Experienced in electrical fault detection, isolation, and correction
of hardware, systems and individual components.
. Troubleshoot electrical hardware, and components. Perform fault
isolation test and repair accordingly.
. Capable of routine system maintenance and analysis functions
including: electrical hardware configurations; adding, removing and
replacing electrical hardware components; use of hardware and
software diagnostic testing tools; reading of electronic circuit
schematics; and repairing circuit boards, using established
mythologies.
Warm Springs, GA Georgia Pacific LLC
11/10 to 3/11
Ground Support Supervisor
. Managed the continual Maintenance of all Rolling Stock equipment. To
include forklifts, bucket loaders, log loaders, welders, generators
and dump trucks.
. Schedules work assignments and managed workflow using automated
maintenance system.
. Manage workforce daily work hours.
. Adjust assets both human and equipment to support production demands.
. Performed trouble shooting of hydraulic, mechanical and electrical
faults to direct mechanics on proper repair procedures.
. Use maintenance tracking program to schedule equipment services and
routine maintenance.
. Coordinate with Venders on the delivery of parts, supplies, and
services.
. Continue to evaluate department for ways to add value in services,
efficiency, and employee relations.
. Promotes a team atmosphere.
. Troubleshoot electrical components using schematics and test
equipment.
. Conduct personnel evaluation to determine strengths and weaknesses for
developing a professional growth course for assigned employees.
. Coordinate with various department managers to address concerns with
maintenance issues and concerns that effect or pose possible threat to
production goals.
. Develop Long-term and short-term financial goal to replace high dollar
inventory.
. Interviewed potential new hires to determine skill set, human traits
and work ethics to determine ability to coexist within the
department's goals and work environment.
. Monitor all product trial from outside venders for compliance,
effectiveness, and cost to determine the feasibility of adapting the
product within the company operational procedures.
. Perform cost analysis on current and future products to report to the
Plant manager on the most efficient path to pursue.
FT Benning, GA ITT/Kelly Services Temp
8/10 to 10/22/10
Heavy Mobile Equipment Mechanic
. Perform operator through Direct Support maintenance on ground support
equipment, common and special tools, troubleshooting of systems, sub-
systems and associate equipment and publications
. Repaired all Military Heavy Equipment to include wheel vehicles. M998,
M998A1 and all HUMMV Family of vehicles.PLS Family. Fuel Tankers.
. Knowledge of generators or like equipment; standard and automatic
transmissions, power train, and both 6 and 8 cylinder engines.
. Performed maintenance on the PLS family of vehicles to include
operator Performed maintenance on track vehicles to include M113,
M1A1, and M88A1. Operator level through direct support.
. Used applicable Technical Manuals to troubleshoot electrical,
pneumatic and hydraulic malfunctions.
Al Asad, Iraq LSI/URS
6/2009 to 6/2010
Ground Support Equipment Foreman
. Review all open job orders daily on the 006 print and give guidance to
the maintenance personnel on the required action for each job.
. Coordinate through Direct Support shop office,( SAMMS-E operator) on
required status changes through 999 Print.
. Supervised a section of 21 Heavy Equipment, Generator, and HVAC
Technicians.
. Shipping and Receiving. Processes requests and turn-in documents at
direct support level through warehousing section. Processes
inventories, surveys, and warehousing documents. Able to read and
interpret document register due-in and due-out. Worked with hand held
scanner for inventory.
. Review each Shop/Team maintenance register with the Section/Team
personnel to discuss actions required and potential conflicts for each
open job order.
. Perform in progress and final inspection of maintenance performed to
ensure all quality standards have been met. Prepare. QA-1 (Quality
Assurance Form) and obtain customer signature of acceptance.
. Interface daily with the Maintenance Supervisor to keep higher-level
management personnel informed of all mission-related
requirements/progress and to receive directives as needed.
. Relay any decisions, which require a higher authority, to the
appropriate personnel.
. Contact customers to pick up completed job orders or bring in
equipment retained by the unit but waiting for shop availability.
. Ensure that customer ordered parts are available and correct, to
support requested maintenance actions and coordinate any additional
parts or POL products required with DS Shop Office/Organizational BMO.
. Interface with DS/BMO production control functions for maintenance and
supply actions to include opening and closing of DS/ORG job orders,
status changes, and requisition of Class IX repair parts.
. Served as fill in Maintenance Supervisor in his absence
. Hold the hand-receipt for all shop tools and equipment assigned.
. Ensure that all maintenance facilities are cleaned daily.
. Provide a clean and safe working environment for all personnel by
maintaining neat and orderly maintenance bays and ensuring the
presence and serviceability of safety equipment such as fire
extinguishers, gloves, hearing protection, and eye protection.
. Direct the turn-in of recoverable items by each section to the
Shop/BMO Office Turn-In POC within 72 hours after signing for part.
. Licensed for all Forklifts.
. Served as the Quality Assurance on all MHE and WHE load test conducted
iaw Military Technical Bulletins.
Al Asad, Iraq EG&G/LSI
4/2008 to 6/2009
Master Mechanic Engineer Equipment
. Perform operator through direct support maintenance on ground support
equipment, common and special tools, troubleshooting of systems, sub-
systems and associated equipment and applicable publications.
. Conducted electrical troubleshooting on components. Sensors, Power
Supply, and sub components.
. Replaced Engines, Transmissions, Axles, Transfer cases and all major
assemblies and sub assemblies.
. Worked on all models of forklifts, M4K, M270, 10K, 6K.( ATLAS). John
Deer 544 forklifts. Replace engines, transmissions, replaced and
rebuilt axles and hub assemblies. Replaced radiators. Repaired and
replaced wiring harness.
. D7 Dozers. Caterpillar Graders. Replaced engines and transmissions.
Performed repairs on steering system and suspension system. Performed
trouble shooting on starting system and fuel systems. Replaced
starters, alternators, fuel ejector pumps.
. 7.5 ton and 40 ton cranes- Replaced engines and transmissions.
Performed maintenance on fuel system and starting system. Replaced
boom assemblies. Performed hydraulic troubleshooting and repairs.
Replaced cylinders. Rebuilt cylinders.
. Performed Hydraulic troubleshooting and repairs on Heavy construction
equipment and Heavy Material Handling Equipment.
. Performed repair on Kalmar RTCH. Electrical troubleshooting. Replaced
engines and transmissions. Replaced axles and boom sections. Replaced
wheel assemblies.
. M100 HET Trailers- Performed annual and semiannual services. Performed
Hydraulic and Electrical troubleshooting. Replace cylinders and
steering assemblies. Performed gooseneck repairs.
. Performed maintenance on the MRAP family. Conducted 10-30 level
repairs. Replaced engine, Transmissions, Axles, and wheel assemblies.
Perform troubleshooting and repairs on Fire Suppression System.
. Knowledge of generators or like equipment; standard and automatic
transmissions, power train, and both 6 and 8 cylinder engines.
. Observes and follows all safety rules and procedures, including
wearing required personal safety equipment.
. Ability to read Technical Manuals.
. Advanced knowledge of Hydraulic, Pneumatic, and or power generation
systems
. Ability to Work Independently/Strong Sense of Urgency
. Excellent Communication Skills
. Repaired all Military and civilian Ground support equipment. To
include but not limited to Water and Fuel pumps( 350GPM and 600GPM)
various model, M1000 HET Trailers, Construction Equipment, Forklift
all models.
. Performed Quality Assurance checks on all equipment before being
released from the shop.
. Load tested MHE and WHE iaw Military Technical Bulletins.
Al Asad, Iraq EG&G LSI
6/2007 to 4/2008
Mechanic Engineer Equipment
. Perform operator through Direct Support maintenance on ground support
equipment, common and special tools, troubleshooting of systems, sub-
systems and associate equipment and publications
. Knowledge of generators or like equipment; standard and automatic
transmissions, and power train.
. Observe and follow all safety rules and procedures, including wearing
required personal safety equipment.
. Read and comprehend technical manuals.
. Serve as a liaison between company and Military personnel to
accomplish task at hand.
. Repaired all Military and civilian Ground support equipment. To
include but not limited to Water and Fuel pumps (350GPM and 600GPM)
various model, M1000 HET Trailers, Construction Equipment, Forklift
all models.
. Replaced engines and transmissions.
. Received parts using the military Pick ticket system.( M.O.R.)
. Recovered parts to clear Orals report.
. Load tested MHE and WHE iaw Military Technical Bulletins. Worked on
all models of forklifts, M4K, M270, 10K, 6K.( ATLAS). John Deer 544
forklifts. Replace engines, transmissions, replaced and rebuilt axles
and hub assemblies. Replaced radiators. Repaired and replaced wiring
harness.
. D7 Dozers. Caterpillar Graders. Replaced engines and transmissions.
Performed repairs on steering system and suspension system. Performed
trouble shooting on starting system and fuel systems. Replaced
starters, alternators, fuel ejector pumps.
. 7.5 ton and 40 ton cranes- Replaced engines and transmissions.
Performed maintenance on fuel system and starting system. Replaced
boom assemblies. Performed hydraulic troubleshooting and repairs.
Replaced cylinders. Rebuilt cylinders.
. Performed Hydraulic troubleshooting and repairs on Heavy construction
equipment and Heavy Material Handling Equipment.
. Performed repair on Kalmar RTCH. Electrical troubleshooting. Replaced
engines and transmissions. Replaced axles and boom sections. Replaced
wheel assemblies.
. M100 HET Trailers- Performed annual and semiannual services. Performed
Hydraulic and Electrical troubleshooting. Replace cylinders and
steering assemblies. Performed gooseneck repairs.
. Repaired all Military and civilian Ground support equipment. To
include but not limited to Water and Fuel pumps (350GPM and 600GPM)
various model, M1000 HET Trailers, Construction Equipment, Forklift
all models.
. Replaced and repaired pump and motors on 350GPM, and 600GPM fuel and
water pumps. Rebuilt flange and pump seals. Repaired suspension and
frame.
. Worked on M1070 PLS. Replaced and repaired hydraulic system to include
cylinders, hydraulic pump replacement and repairs. Hydraulic manifolds
and electrical repairs and replacement.
. Performed maintenance on the MRAP family. Conducted 10-30 level
repairs. Replaced engine, Transmissions, Axles, and wheel assemblies.
Perform troubleshooting and repairs on Fire Suppression System.
3/2007 - 6/2007 BAE Systems
Fort Benning, GA
M2A2 Bradley Mechanic
. Worked at Fort Benning GA on a government contract as a mechanic on
the M2A2 Bradley Fighting Vehicle.
. Serve on the Engine team replacing engines and transmissions.
Troubleshooting, Fuel rail test, and other diagnostic test.
. Operates and Performs Preventive Maintenance Services and Checks.
. Performs system checks, STE, ABIT, 10, 20 and 30 level maintenance.
. Conduct troubleshooting on all specialties and add on equipment as
needed.
. Orders parts using DOD Technical Manuals.
7/2002 - 11/2006 Swift Denim
Columbus, GA
Shift Supervisor
. Manage thirty-nine employees during a twelve hours shift in a fast
pace denim manufacturing Environment.
. Conducts daily, weekly, and quarterly inventory of raw and finished
products.
. Ensure that staff and equipment meet production schedule and goals are
reached.
. Managed labor and supply budget.
. Reinforced safety, conduct, training standards, and daily operating
policies.
. Perform Quality Assurance measures for manufacturing process to
prevent defects in products.
. Enforced OSHA regulations.
. Enforced Federal and State EPA laws.
4/1998 - 7/2002 Marubeni Denim
Columbus, GA
Shift Manager
. Recommend measures to improve production methods, equipment,
performance, and quality of product.
. Manage department budget.
. Established or adjusted work procedures, equipment and human resources
to meet production schedule.
. Effectively manage thirty employees within three departments.
. Work closely with all levels of management to ensure long- term and
short-term goals are being accomplished.
. Enforced OSHA regulations.
. Enforced Federal and State EPA laws.
Education
Gold Seal Online Private Pilot Ground School- Certification, March 2012
(Aeronautical
Knowledge) FAA
Columbus Technical College, Columbus, GA 2001-2004
(AA- Management and Supervisory Development)
Certified BETSS-C Operator
MRAP Certified - RG33L plus, Max Pro
U.S. Army Basic Non Commissioned Officers Course
U.S. Army Primary Leadership Development Course
U.S. Army Retention School
U.S. Army Nuclear, Biological, and Chemical School
Murrell Dobbins Vocational High School Philadelphia, PA 1985(Diploma)
SKILLS, CERTIFICATIONS AND ACCOMPLISHMENTS
ACTIVE SECRET CLEARANCE
Certified BETSS-C Operator
MRAP Certified - RG33L Plus, Max Pro
Experienced in a manufacturing plant startup from ground break to full
production (Marubeni Denim) in 1998
Helped with the training of a newly hired work force, and the
implementation of policies and procedures at Marubeni Denim
Certified Heavy Equipment Operator
Working knowledge of AS/400 Product Tracking Program
Proficient in Microsoft Word, Access, Excel and PowerPoint
CPR Certified
Certified Combat Lifesaver
US Air force certified in Cargo Airlift Procedures
Served two combat tours in the U. S. Army
Contact this candidate