Engineer Process

MOHSIN RAZA

(Process/Chemical Engineer)

Address: ****-*-*** ***** ****, Lahore, Pakistan

Cell: +966*********

E-Mail: *************@*****.***

PROFILE

I am a graduate in Chemical Engineering from University of the Punjab. I am an ambitious, self-

motivated person with a great deal of enthusiasm, energy and ability, looking forward to a

rewarding career in a stimulating environment. I enjoy working as part of a team or equally as an

individual.

Father Name: Muhammad Raza

NIC No: 35202-7780179-1

DOB: 23-08-1981

Nationality: Pakistani

Marital Status: Married

Total Experience: 10 Years

Religion: Islam

Passport No: CB9891792

Passport Issue Place: Lahore

Passport Issue Date: 15/10/2012

Passport Expiry Date: 17/10/2017

PEC Registration #: CHEM/4861

Status: Professional Engineer

Current Location: Al Khobar, Saudi Arabia

Languages: English, Urdu and Punjabi

Technical Summary

Chemical Engineer with over 10 year’s multidisciplinary experience of Refinery/petrochemical

plant processes. This includes conceptual design FEED, Development of PFD’s & P&ID’s,

detailed engineering, feasibility studies, Revamping/modifications & troubleshooting, Equipments

Performance Evaluation, Cause & Effect Diagram Preparation, Project HAZOP Study, Route

Cause Analysis, Pre-Commissioning, Commissioning, Start-up shutdown procedures development

and Debottleneck Studies of various process plants.

Area of expertise are Crude Distillation, Catalytic Reforming, Regeneration of catalysts, Naphtha

& Diesel Hydro treating processes, Gas processing, Aromatics complex, Molex & Penex

Technology, Vacuum Distillation, Sulfur Recovery & Amine treatment as well as an extensive

experience of offsite, Utilities & waste water treatment & Process Safety Management including

Process Hazards Analysis, HSE and operating plant environments

Proficient in the development of Refinery and Petrochemical simulation models on ASPEN

HYSYS. Well familiar with standard design practices and codes such as API, ASTM, UOP, ASME,

NFPA, ISO, QMS, GPSA Etc.

Recently join Fluor Arabia Limited as a Design Engineer formerly worked for Jacobs

International Holding inc. Abu Dhabi as Senior Process/Commissioning Engineer

CAREER HISTORY

Fluor Arabia Limited (Jan 13 to Date)

I joined Fluor Arabia Limited as a Process Design Engineer in Process Engineering Department.

Work on following projects.

Luberef PDA Revamp Project

Hydraulics of the unit

PSV Sizing

Update PFD & P&ID from FEED after detail engineering

Line Listing of unit

Process Description

Process Control Narrative

Cause and Effect Diagram

Operating Manual of Unit

Performance Test Procedure

Provide process data of instruments to control system

Provide process data of equipment to mechanical

Coordinate piping for 3D model development

Participate Hazop study, prepare reports and close out of actions items.

Attend client meetings to know their requirement about the unit and update the P&ID and Process

Documents as per their need.

Sadara Port and Pipeline Project

Line List of port and pipelines facility

Hydraulics of the pipelines system

MIRR (Mechanical Integrity Registration Requirement) list

Turn over system philosophy

PSV, Control Valve, RO sizing.

Participate HAZOP, make reports and close out of action items.

Prepare PFD and P&ID for the processes.

JACOBS International Holding Inc. (Feb 12 to Jan 13)

I joined JACOBS as Senior Process/Commissioning Engineer for Ruwais Refinery Expansion

Project in Abu Dhabi.

Reviewing the 3D Models, PFD, P&ID.

Reviewing Pre-commissioning, Commissioning and start up procedure.

Reviewing Operation, Safety & Maintenance procedure.

Participate in Hazop and SIL of Refinery Heaters, Incinerator and Compressors.

BYCO Oil Pakistan Limited. (Nov 08 to Feb 12)

I joined BOPL as Senior Process Engineer in Process Design department. Work on P&ID up

gradation and modeling of the refining and petrochemical units.

- Project management and process study of modification.

- Optimize the process design, including cost and utility consumption.

- Process engineering calculations

- Heat & Mass balances

- Process equipment specifications, data sheets, and bid tabulations (e.g. fractionating columns,

heat exchangers)

- User Requirement Specifications (URS)

- Sizing and selection of equipment, materials, and process systems

- Check vendor drawings to ensure design accuracy and compliance with specifications

- Assist in the preparation of engineering project proposals

- Accountable for the successful completion of assigned engineering tasks and preparation of

engineering deliverables

- Interface with other internal engineering disciplines (mechanical, civil/structural, electrical,

instrumentation, automation, etc.) to ensure a coordinated design and complete engineering

deliverables

- Interface with Client and vendors to define project scope

- Monitors/supervises the work of less experienced process engineers and assists with training

- Check modified process systems equipment sizes, line sizes, control valve sizes, relief valve

sizes, and all other aspects of the design unique to Process Engineering.

- Equipment specification deliverables including the Process Specifications for Engineered

Equipment and Equipment Data Sheets, Assist mechanical engineering and procurement in the

final purchase of the equipment.

- Developed specs and data sheets of the missing equipment like heat exchanger centrifugal

pumps, injection pumps, vessels etc.

- Assessing that available equipment (Heat exchangers, Pumps, Vessels, Day tank, etc.) can be

utilized in place of missing equipments.

- Chemicals and catalyst requirement, Consumption rate and Specifications.

- Tie in Lists, including process conditions, state and stream compositions.

- Line listing of the process units. Addition of process conditions in line list.

- Coordinating stack size reduction study of the refinery.

- Compilation of process, utility dossier.

- Hydraulics of the process piping.

- Design and construction of the tanks.

- Refinery Oily and Storm water system design.

- Refinery waste water system design coordination.

- Instrument/Utility Air and Nitrogen system installation.

- Work on renovation of oil storage terminal. Design Fire water requirement and unloading

(decanting) and loading (Gantry) facilities.

- Coordinate the review of agreements, proposals of contractor, technology supplier, and vendor

documents.

- Budget preparation and implementation

- Factory Acceptance test (FAT) for the newly purchased pumps.

- Material inspection of the newly purchased heat exchanger.

Pakistan Refinery Limited. (July 03 to Nov 08)

I worked in Pakistan Refinery limited; Karachi as Process Engineer in Technical & Projects

department for Five Years.

- Monitoring and evaluating the performance of various process equipments like Pumps, Heat

Exchangers, Surface Condensers, Air Coolers, Distillation Columns, Turbines, Compressors,

Furnaces, Reactors, Cooling Towers, Degasifier, Deaerator and Boilers etc.

- Energy and Material balance of units.

- Acting as an interface among Technical services, laboratory and operation departments of the

company.

- Daily plant Monitoring and Data Logging of Crude, Hydrotreater, Platformer and Utilities

section to integrate the plant data base system and to evaluate the key performance indicators.

- Vigilance and thorough checking of finished Products to ensure its quality / standard up to the

mark.

- Generate both (Daily and Monthly) based performance fact sheets in connection with

Crude through put

- Finished product yields

- Performance of different equipments

- Furnaces & Boilers heat duty and efficiency

- Participate in Plant Trouble shooting using HYSYS. Carry out Test Run of various units to

optimize their performance

- Advise the operations department for re-adjustment of plant parameters if needed and to change

the severities of reactors.

- Carry out Test Run of various units to identify bottlenecks and to optimize their performance

- Technical report writing on various issues.

- Cost savings and technology upgrades.

- Establish energy conservation projects, i.e. WHRU.

- To check the catalyst activities of Hydrotreating and Platforming units.

- Participate in turnaround 2006 and carried out R-56 catalyst regeneration and process

modifications.

- Supervised health safety and environment related activities during the turnaround.

- Supervising annual compliance requirements: Stack Testing, Noise monitoring, Radiation

Monitoring, ambient air quality, Chemical Risk Assessments, and Updating Material Safety Data

Sheets (MSDS).

- Prepare HSE guidelines and requirements and provide to contractors during turn-around

activities.

- Finalize BOD with SGSi for the new projects.

- Involve in the BDP and BDEP preparation for the new projects.

- Hydraulic study on white oil pump was finished regarding its NPSH problem.

- A member of Hazop study team

- Technically & economically evaluate project study reports

- Technical evaluation of plant changes.

- Suggest new modification for process improvement.

- Prepare a report on awareness of CDM and identify the potential areas which can be asses for the

project activity.

SIMULATION & MODELING

Aspen Hysys V7.3

AFT Arrow 4.0

AFT Fathom 7.0

HTFS 2006.5 (Tasc+, Acol+)

PALS (Line sizing software)

COMPUTER SKILLS

Computer Language FORTRAN 77, Microsoft Visio Technical, Microsoft Window (98, 2000, XP,

7)

Microsoft Office (word, Excel, Power Point etc.), AutoCAD, Internet Application

EDUCATIONS CAREER

B.SC. (ENGG.) Chemical Engineering from institute of Chemical Engineering & Technology

University of the Punjab, New Campus, Lahore securing 75.125% marks.

F.SC. from Govt College of Science Wahdat Road Lahore securing 69% marks.

Matriculation from Govt. High School, Town Ship Lahore securing 75% marks.

REFERENCES:

Reference will be provided on demand.

Contact this candidate