Engineer Design

Sean M. Schiltz

**** ******* ******, ******, ** *6205 Phone: 425-***-**** Email: ****.*******@*****.***

OBJECTIVE

Secure a challenging position with growth opportunity utilizing my aircraft and mechanical product development

design and structural analysis expertise together with my technical knowledge to create an environment for business

success.

CLEARANCES

US DOD Secret Level Security Clearance Previously Held 2007-2009

EXPERIENCE

Zodiac Aerospace Corporation, Gainesville, Texas January 2014 – Present

Design Engineer – (Contract Position)

Zodiac Seats Products Division

• Used CATIA V5 and SmarTeam to develop aircraft seats used on Boeing and Airbus aircraft.

• Designed the aircraft seats for SriLanka airlines for the Airbus A330 aircraft Z300 model seats.

• Used Pro Engineer and intralink in the translation of models from Pro E into CATIA V5 for aircraft seats design and

development.

Parker-Hannifin Corporation, Ogden, Utah February 2013 – November 2013

Design Engineer – (Contract Position)

Parker Aerospace Control Systems Division

• Worked on doing design changes to control systems equipment for Boeing 7 series, Gulfstream, and Embraer

companies.

• Used CATIA V5 and ENOVIA V6 for designing control systems equipment and storeage of models after they have

been completed or are in work.

• Designed a nosewheel gear steering assembly for the Boeing 737-MAX aircraft and slat actuator assemblies for

the new Gulfstream AAP Program.

CDI Corporation, Tempe, Arizona July 2012 – September 2012

Mechanical Designer NE – (Contract Agency – Direct Position as Field Employee)

CDI Aerospace

Goodrich Corporation Data Cleanse Project, Vergennes, Vermont

• Worked on cleaning up the CATIA V5 datasets for renaming convention and how the parts were constrained in the

CATProduct assemblies.

• Coordinated with other teammates and Goodrich for issues that come up from the data cleanse process.

The Boeing Company, Mesa, Arizona January 2010 – July 2012

Mechanical Systems Design and Analysis Engineer

Boeing Defense, Security and Space, Mesa Engineering Enterprise Support

787-8 and -9 Section 43 Product Systems Efficiency

• Worked on a Sideguide Intercostal Optimization for the 787-8 and -9 Section 43 sideguide intercostals.

• Worked on PEEK fastener change of screws to push pin screws for 787-8 Section 43 ECS ducts.

• Carried a change through the change board process when trying to implement cost savings initiatives on the 787-

8 airplane that is currently in sustaining mode.

• Coordinated with 787-8 and -9 Section 43 team for issues that come up from carrying design changes through the

design change process.

Selective Laser Sintering Laboratory

• Worked in the Selective Laser Sintering Lab on making plastic parts used on the AH-64 Apache, A-160

Hummingbird, and other programs that needed SLS support.

• Used Unigraphics NX6 and Teamcenter in the creation of stl files that contained CAD models which were loaded

into the Sinterstation 2500 machine which created SLS parts

• Coordinated with customers from the AH-64 Apache, Chinook, A-160 Hummingbird, tool design teams for issues

that come up during the SLS fabrication and part definition process.

Engineering Skills Rotation Program

Product Review Engineer (Liaison Engineer)

Boeing Defense, Security and Space, Manufacturing and IWA Programs, 531 building

• Dispositioned routine nonconforming parts in Electronic Product Assessment Record (EPAR) system and

Longbow Apache Product Assessment Record (LAPARR) system to figure out corrective action for parts.

• Participated in Material Review Board and Integrated Product Teams by coordinating in cross function teams

across disciplines on the AH-64 Apache Helicopter Program.

• Disposition parts on the AH-64 Apache Attack Helicopter, F/A-18 Hornet, F-15 Eagle, and other IWA Programs that

needed support.

• Performed root cause analysis and corrective action of non-conformances to reduce scrap, minimize rework,

reduce cost and improve quality to meet all requirements.

• Used TeamCenter in the investigation of nonconformance and came up with my own repairs to different defects or

errors.

Mechanical Systems Design and Analysis Engineer

Boeing Defense, Security and Space, Rotorcraft Engineering Enterprise Support

787-9 Section 45 Test Panels

• Created impact drawings in CATIA V5 used for structural impact testing for the aft wheel well bulkhead and

horizontal pressure deck.

• Coordinated with Section 45 Test Team for placement of strain gages and issues that come up from structural

testing.

787-9 Cargo Floor Common Architecture Group

• Used CATIA V5 in designing interface control models for the Cargo Floor Handling System in Sections 41, 43, and

46, creating layout drawings in support of drawing release.

• Coordinated with other structural design Integrated Product Teams and aircraft partners for concurrence on design

issues associated with aircraft design.

The Boeing Company, Renton, Washington October 2005 – October 2009

Structural and Payload Design Engineer

Integrated Defense Systems, 747- 8 Intercontinental Program (IWA Program), Section 46 Body and Skins IPT

• Used CATIA V4 in designing Skin Lap Integration Joints, stringers, creating layout drawings in support of drawing

release.

• Coordinated with other structural design Integrated Product Teams for concurrence on design issues associated

with aircraft design.

• Created engineering bill of materials in Program Data Manager to support drawing release.

Structural and Payload Design Engineer

Integrated Defense Systems, 747- 8 Freighter Program (IWA Program), Section 46 Aft Frames IPT

• Used CATIA V4 in designing structural side frames and creating layout drawings in support of drawing release.

• Coordinated with other structural design Integrated Product Teams for concurrence on design issues associated

with aircraft design.

• Created engineering bill of materials in Program Data Manager to support drawing release.

Mechanical Systems Design and Analysis Engineer

Integrated Defense Systems, P8-A Poseidon Program, Mechanical Systems Installation IPT

• Checked and dispositioned part interferences using Flythru 6.0.5 and coordinated with designers to make

changes to their designs to eliminate interferences.

• Generated part drawing picture sheet to assist other mechanical designers with the drawing release process.

Structural Analysis Engineer

Integrated Defense Systems, P8-A Poseidon Program, Mechanical Systems IPT

• Generated Strength Check Notes on parts created by structural designers in support of drawing release to

develop positive safety margins.

• Used MSC.Patran to create finite element models of components in support of creating strength check notes and

supporting structural analysis lead’s tasks.

• Assisted Structural Analysis lead with tasks associated with developing interface loads from suppliers’ equipment

for use in mechanical interface teams.

TECHNICAL SKILLS

Tools: Solidworks, LabVIEW, ANSYS 8.0, MSC.Patran, CATIA V5, CATIA V4, Product Data Manager, IVT, ENOVIA

V5 and V6, SmarTeam, Unigraphics NX6, Pro-Engineer, Interlink

Operating Systems: Windows 8, 7, Windows Vista, XP, 2000, 98

Applications: MS Word, Excel, PowerPoint, PROJECT, Matlab

EDUCATION

Masters in Engineering Management, Engineering Management January 2008 - Present

Washington State University, Pullman, WA

Bachelor of Science in Engineering, Aerospace Engineering May 2005

Arizona State University, Tempe, AZ

AFFILIATIONS

Member, American Institute of Aeronautics & Astronautics (AIAA) October 2006 – Present

Young Professional

REFERENCES

Available Upon Request.

Contact this candidate