Project Engineer
Resume:
SALUSTIO MATEO T. SAN FELIPE JR
YISHUN AVE *, BLK 706, #08-194
SINGAPORE 760706
Mobile : 65-81887206
Email : ********@*****.***
OBJECTIVE : To secure a career where I can apply my expertise in the field of
Design Drafting and to experience other skills to enhance my capability
& flexibility to do work in general.
EDUCATION : DEGREE IN BACHELOR OF SCIENCE IN CIVIL ENGINEERING
University of Nueva Caceres, Philippines
EARNED UNITS IN MASTERAL DEGREE IN EDUCATION
De La Salle University, Philippines
A. PROFESSIONAL EXPERIENCE ( SINGAPORE )
May 2012 – November 2013 GS ENGINEERING AND CONSTRUCTION CORP
1A Tampines Street 24, #01-012
Singapore 529314
POSITION : CIVIL DRAFTER
PROJECT ASSIGNAMENT : - Contract 925 Construction And Completion Of Tampines East Station
And Associated Tunnels For Downtown Line Stage 3
DUTIES AND RESPONSIBILITIES:
Responsible for the preparation of shop drawings of structural capping beam reinforcement bars of the
overall station and tunnel area for submission to Consultant for approval.
Responsible for the preparation of shop drawings for the section details of structural openings of Under Platform,
Platform, Service and Concourse to be incorporated by other drafters for the reinforcement details.
Responsible for the preparation of excavation sequence for Tunnel area based on the information data provided
by Geotechnical Engineer.
Responsible for the preparation of as-built shop drawings of bored piles for Tunnel and Station area.
Responsible for the preparation of as-built shop drawings of couplers as per panel number for Tunnel area
for submission to Consultant for approval.
Prepared shop drawings of road diversion plan based on design working drawings for submission for
approval and construction.
Prepared latest diversion alignment indicating current road and existing road alignment, current and relocated bus
stop and footpath as per requirement by construction team for LTA approval.
Using Microstation V8i software to prepare the above shop drawings.
1
Sept 2011 – May 2012 CMC RAVENA SINAPORE
11A Tampines Avenue 1
Singapore 528693
POSITION : MICROSTATION DRAFTER
PROJECT ASSIGNAMENT : - Contract 926 Construction And Completion Of Tampines West Station
And Tunnels For Downtown Line Stage 3.
DUTIES AND RESPONSIBILITIES:
Responsible for the preparation of shop drawing of drain diversion alignment to facilitate the construction
of Station Diaphragm Wall.
Responsible for the preparation of shop drawings for capping beam for the Station based on Consultant
latest information.
Responsible for the preparation of shop drawings of as-built bored piles location for approval.
Responsible for the preparation of shop drawings of utilities / services and trial trench for information.
Used Microstation to prepare the above shop drawings.
Nov 2007 – August 2011 SATO KOGYO (S) PTE LTD
Fu Lu Shou Complex
Singapore
POSITION : CAD DRAFTER
PROJECT ASSIGNAMENT : - ER 141 Braddell Rd/Thomson Rd/Lornie Rd Interchange
- District Cooling System at Marina Bay Sand
- Jurong Rock Cavern at Jurong Island
- Bradell Bishan Fly-over
- National University Singapore (NUS) Link Bridge
- Jurong Mrt Modification Project
- Rolls Royce Project
- C928 Bedok Town Park
DUTIES AND RESPONSIBILITIES:
Responsible for the preparation of shop drawings of road diversion alignment and drains.
Responsible for the preparation of shop drawings of utilities / services and trial trench.
Responsible for the preparation of architectural shop drawings such as sectioning and detailing.
Responsible for checking drawings for accuracy, continuity, format adherence and standard conformity.
Responsible for the presentation of the drawing documents for internal and external auditing.
Responsible for the preparation of as-built drawings for submission to Consultant.
Used Microstation V8i and Autocad software to prepare the above drawings.
APRIL 2006 – AUGUST 2008 TAISEI CORPORATION
Ubi Ave 4. Singapore
Human Resource Services
HR Assistant – Project Employee
POSITION : CAD DRAFTER
PROJECT ASSIGNAMENT : - C424 Kallang Paya Lebar Tunnel Expressway
DUTIES AND RESPONSIBILITIES:
Prepared shop drawings of road diversion alignment based on working drawings.
Responsible for the design and preparation of the Sliding Gate at Airport Road in 2D and 3D
application using Microsation software.
Responsible for the drawing control and records
Checked drawings for accuracy, continuity, format adherence and standard conformity.
Used Microstation 7 to prepare the above drawings.
2
SEPT 2004 – DEC 2005 : WOH HUP PTE LTD
Buona Vista Road, Singapore 13349
POSITION : MICROSTATION DRAFTER
PROJECT ASSIGNAMENT : C855 Circle Line Stages 4 & 5
(Holland Sta, Buona Vista Sta & One North Sta)
DUTIES AND RESPONSIBLITIES:
Prepared various shop drawing details of temporary and permanent works.
Prepared Detailed drawings / sketches for attachment of various method of statements, procedures
and submission to the clients.
Responsible for monitoring and updating of drawing lists for temporary and permanent works.
Liaised regularly with the design coordinator relating to contractual and requirements of drawings for submission to
clients.
Used Microstation 7 software to prepare the above drawings
MARCH 1998 – MARCH 2003 : LAND TRANSPORT AUTHORITY
Engineering Division, Singapore
POSITION : TECHNICAL SERVICE OFFICER
PROJECT ASSIGNAMENT : - C423 Kallang / Paya Lebar Expressway
- Widening of Pan Island Expressway from Rajah Expressway to Kraji Expressway.
- Interchange at Braddell Road / Bishan Road
- Toh Guan Road Interchange and Toh Guan Road Extension to PIE
- Widening of Kim Keat Road from Balestier Road to Lorong Limau.
DUTIES AND RESPONSIBLITIES:
Prepared proposed road alignment of expressway and arterial roads for presentation and tender.
Prepared temporary diversion road and permanent road and arterial roads.
Prepared Vertical and Horizontal Profile of the road alignment (Longitudinal Section) using INROADS software.
Responsible for the extraction of topographical information from RIMS for incorporation of the proposed
road alignment.
Prepared Adoption plan, Land Acquisition plan, and Land ownership plan for information.
Prepared Site Plan, Traffic Layout Plan, Trees Affected Plan, Combined utilities / services Plan.
Prepared Cross Sectional Detail of Road alignment and other detailed sections in general.
Used Microstation software to prepare all the above tender drawings.
B. PROFESSIONAL EXPERIENCE ( KINGDOM OF SAUDI ARABIA )
MARCH 1997 – SEPT 1997 : PRECAST MANUFACTURING COMPANY
Engineering Department, Jeddah, Saudi Arabia
POSITION : AUTOCAD OPERATOR
PROJECT ASSIGNAMENT : - Construction of Precast Manufacturing products
DUTIES AND RESPONSIBLITIES:
Prepared pre-cast shop drawings of wall panels, floor slabs, columns, beams, window, doors and hollow cores.
Responsible for the preparation of architectural pre-cast drawings.
Responsible for casting analysis.
MARCH 1996 – SEPT 1996 : ROYAL SAUDI NAVAL FORCES, HQ, Riyadh, Saudi Arabia
POSITION : AUTOCAD OPERATOR
PROJECT ASSIGNAMENT : - Installation of Communication cable system.
3
DUTIES AND RESPONSIBLITIES:
Responsible for the preparation of communication cable system drawings from sketches and design information
furnished by system design engineer.
Developed standard engineering details in conjunction with the design criteria.
Checked drawings for accuracy, continuity, conformity and format adherence.
C. PROFESSIONAL EXPERIENCE ( PHILIPPINES )
JUNE 1994 – JUNE 1996 : UNIVERSAL CONSTRUCTION CORPORATION
Metro Manila, Philippines
POSITION : AUTOCAD OPERATOR
PROJECT ASSIGNAMENT : - Residential, Offices and High Rise buildings
DUTIES AND RESPONSIBLITIES:
Responsible for the preparation architectural shop drawings for information and construction.
Coordination with the design architect to update information and construction drawings.
Responsible for the drawing documentation and technical reports and related communication.
Used Autocad to draft the above drawings.
JUNE 1995 – MARCH 1996 : ST. THOMAS ACADEME TUTORIAL CENTRE
Last Pinas City, Philippines
POSITION : PART TIME TEACHER
PROJECT ASSIGNAMENT : - Teaching Algebra for high school students and elementary mathematics.
DUTIES AND RESPONSIBLITIES:
Responsible for coaching and assisting students who have difficulty with Trigonometry and Algebra.
Assisting elementary pupils with elementary mathematic subjects.
Giving guidance, encouragements and motivation to students not only to pass the subjects but to
have good grades.
Used simple methods of teaching for the students to be able to solve problems in mathematics.
APRIL 1992 – MAY 1995 : SELF-EMPLOYED, Philippines
POSITION : FREE LANCER PRODUCT DEALER
PROJECT ASSIGNAMENT : - Buy and sell products
JUNE 1988 – MARCH 1992 : DEPARTMENT OF PUBLIC WORKS AND HIGHWAYS
Naga City, Philippines
POSITION : ENGINEERING ASSISTANT
PROJECT ASSIGNAMENT : - Infrastructure Projects
DUTIES AND RESPONSIBLITIES:
Supervision of infrastructure projects such as School building, Road pavement and Sea wall construction.
Site Supervision with the design engineer.
Responsible for progress report.
SEPT 1987 – APRIL 1988 : FIRST MARISON CHEMICAL INCORPORATED
Queson City, Philippines
POSITION : SALES ENGINEER
PROJECT ASSIGNAMENT : - CHEMICAL PRODUTCS
DUTIES AND RESPONSIBLITIES:
Responsible for coordination and negotiation of the products
Responsible for the purchase order requirements by the clients.
Submitted monthly sales report.
4
SOFTWARE KNOWLEDGE :
1. AUTOCAD SOFTWARES (Olld and new version) 4. Vicio Technical
2. Microstation Software ( Version 7, V8 and V8i) 5. Draw Perfect and Adobe
3. INROADS Intergraph 6. Microsoft Words and Excel
SOFTWARE / COMPUTER TRAINING :
1. Network Technology - Meralco Foundation Institute, Philippines ( July 7 to July 30, 2003 )
2. Networking Essential Plus - Microsoft Press, Meralco Foundation Institute, Philippines
(July 7 – July 30, 2003)
3. PC Troubleshooting Level 1 - INFORMATICS, Philippines ( June 26, 2003 )
4. Basic Microsoft Powerpoint 97 - Smart Team 2000 Pte Ltd, Singapore ( Nov. 6 to Nov. 7, 2000 )
5. Advanced Microsoft Excel - Smart Team 2000 Pte Ltd, Singapore ( Nov. 29 to Nov. 30, 2000 )
6. NRAIL ( Inroads) Training - Interactive Graphics Systems, Singapore (June 1 to June 9, 1999)
7. Autocad 3D Application training - Microcad Technologies Co., Philippines (Feb. 2 to Feb. 11, 1998)
8. Basic Autocad Training - Hands-On Computer Centre, Philippines ( May 9, 1994 )
OTHER TRAINING / SEMINARS:
1. Effective Time Management - Integrative Learning Corporation Pte Ltd, Singapore ( Jan 16, 2003 )
2. Getting Closer To Your Customer - International Business and Management Education Centre,
Singapore (Sept. 23 – Sept. 2002)
3. How To Make Equal Work For You In The Working Environment - Integrative Learning Corp. Pte Ltd,
Singapore (Aug. 21 - Aug 22, 2002
4. How to Handle Difficult Customers successfully - Integrative Learning Corporation Pte Ltd,
Singapore (June 27 - June 28, 2001)
5. Developing Effective Team Building – PSA, Singapore (Dec. 14 to Dec. 15, 2000)
6. Problem Solving and Creativity - PSB Singapore
7. WITS Members - PSB Singapore (March 15 to March 17, 1999)
8. WITS Competition - Singapore (Jan. 2, 2003)
9. 3rd WITS Convention - Singapore (May 4, 1999)
10. 6Th WITS Convention - Singapore (2002)
PERSONAL INFORMATION :
DATE OF BIRTH : SEPT. 21, 1962
PLACE OF BIRTH : SAGNAY CAMARINES SUR, PHILIPPINES
NATIONALITY : SINGAPORE PR (FILIPINO)
RELIGION : CHRISTIAN CATHOLIC
HEIGHT ; 5’ 8”
WEIGHT : 63.5 KGS
5
Contact this candidate