Quality Assurance Engineer

PARIKSHIT V TRIVEDI

(BACHELOR OF TECHNOLOGY IN MECHANICAL ENGINEERING)

QUALITY ASSURANCE MANAGER

MOBILE: 0091 992-***-****

EMAIL: *****************@**********.***

Objective: To Work as an Engineer Manager in your Esteem Organization using my

logical & practical skills with the Brief knowledge of my Previous study and

see myself with an increased responsibility and potential.

Summary: Overall 6.5 Years of Experience in Quality Assurance. I have been working

as an Engineering Manager (Quality Assurance Manager) from Last Five

Years.

Education Qualification:

Θ SSC is passed in March 1999 from Junagadh and Qualified from (Guj)

INDIA Gujarat Secondary Education Board. Passed with 80.00% from

Carmel convent High school, Junagadh

Θ HSC in March 2001from Junagadh (Guj) INDIA and Qualified from

Gujarat Higher Secondary Education Board. Passed with 80.02% from

Swami VivekanadVinay Madir, Junagadh.

Θ B.E (Mechanical) from July 2005 and Qualified from V.V.Nagar (Guj)

INDIA Sardar Patel University – Anand. Passed with 4.44 CPI from

G.H.Patel College of Engineering and technologies, V.V.Nagar.

Work Experience

ℵ Company : Netafim Irrigation India Privet Limited - Baroda

ℵ Position : Deputy Manager Quality Assurance

ℵ Period : From November – 2009 To Till Date

ℵ Company Profile :- Netafim Irrigation India Private Limited is the Indian subsidiary of

Netafim Israel was incorporated September 1997.For last 11 years, Netafim India is

manufacturing and supplying wide range of Irrigation Equipments and products along with

40 years of Netafim's knowledge and experience of providing comprehensive irrigation

solutions all over the world. Today Netafim is the world's leading developer, manufacturer

and distributor of low-flow irrigation products and drip systems with the largest market

share, having operations in more than 112 countries and turnover of 2000 Crore Rupees.

As population of india continues to rise and natural resources come under pressure, more

efficiency makes more sense than ever. At Netafim India Irrigation Privet Limited, we help

our customers to produce more yields and better crops with fewer resources. Netafim

Irrigation India Privet Limited has the lineage of global leader in smart drip and micro-

irrigation solutions for a sustainable agriculture. Since introducing the world's first drip

irrigation solutions in 1965, it has led the way by developing products that help their

customers optimize results.

ℵ Job Responsibilities :

φ Working as a Management representative (MR) in the company and

responsible to Maintain and sustain the certification of ISO 9001:2008 (Quality

Management System) and ISO 14001:2004 (Environmental Management

System).

φ Being a Lead Auditor in ISO 9001:2008 responsible for the coordinate for the

Internal Audits twice in the Year across the company.

φ Being the MR of the company also coordinate with the accredited certification

body (In our Case ICS) for conducting the External Audit (Recertification +

Surveillance audit) once in a Year for Both the standards.

φ Developing of the Standard Operating procedures (SOP) and Work

Instruction (WI) for the all the departments by coordinating with their

departmental heads as per the standard requirements of the ISO 9001:2008 and

ISO 14001:2004.

φ Maintaining the document control across the organization and guide all the

departments to use of standard/defined formats to create standardize

environment.

φ Conduct the Management Review meeting to ensure the continual improvement.

φ Schedule to be made for the voluntary field visits to extract the customer

expectation and by complying with the raised points by farmer indirectly

contributing in to achieve customer satisfaction which is one of the targets of

our company.

φ As a part of ISO 14001:2004 update to be reviewed in legal legislations and

safety standards to keep manual and procedures up to the date.

φ At starting of the Year Plan a meeting to decide objectives for Next Year and

make budget as part of resource management for the Next Year by coordinating

with all departmental heads.

Work Experience

φ Also trend to be maintained for all the objectives of ISO 9001:2008 and ISO

14001:2004 for analyze the performance of the company and inform to

Management regularly.

φ Plan and conduct Mock Drill in the factory premises once in a Year for emergency

preparedness.

φ Being a Deputy Manager Quality Assurance for Out Sourced components

responsible for all the bought out items at receipt section and make incoming

inspection plans for all the products.

φ Also facilitate Suppliers in making manufacturing drawings from our conceptual

drawings of the product and get desire product for the company as per customers’

requirements.

φ In addition to that help the suppliers to interpret the drawings received from

ISRAEL (Our corporate office) and make products for India as well as ISRAEL.

φ Make Schedule of Supplier Audit to get right product in right time. It helps us to

maintain timeliness in supply chain. Also helps supplier to identify the potential

risks and defects at manufacturing stage of the product itself.

φ Responsible for the Response time of the customer Complaints from the

manufacturing and Ware house. In addition to that my duty to identify the root

cause with help of Quality tools like Root cause analysis and 5 –Why, Finally I

need to use the problem solving tool 8D for severe complaint and close the

same by taking proper corrective and preventive actions.

φ I am sole responsible for the Implementation of the Global projects in INDIA.

Working as Global team members and closely coordinating with our corporate

ISRAEL team in developing, assembling, importing and exporting the products in

INDIA. As an example we as a team developed the Plastic Hydro-cyclone filter,

Connector Moulds from TAIWAN, Import Green House material from CHINA,

start assembly of Ventury injectors and Meganet Sprinklers.

φ During the Global Product development project I am responsible to coordinate for

the product design with ISRAEL team then convert it in the manufacturing

drawing and coordinate with supplier to make sample. In Next step I suppose to

coordinate with ISRAEL for the approval of the product with test results of INDIA.

φ As a part of “Key Responsibility Area (KRA)” I suppose to coordinate for the

training need identification by plotting competency matrix for all the

engineers.

I am an internal faculty for some training topics like “Awareness of ISO

φ

9001:2008”, “Awareness of ISO 14001:2004” and “Problem Solving tools”.

φ My responsibility is to conduct the “Out sourced Product Quality Improvement

meeting” Quarterly once with all the SBU(Strategic Business Units – In our case

they are four, SBU North, SBU West, SBU Central and SBU South) and extract the

Quality improvement points along with expectation and fulfill the same by

coordinating with Purchase department, Suppliers and Sales & Marketing

department.

φ As part of KRA the management assigned me to do at least 12 innovations

(KAIZAENS) per Year within my department.

Work Experience

ℵ Company : Shaily Engineering Plastics Limited – Baroda.

ℵ Position : Senior Engineer Quality Assurance

ℵ Period : From May-2009 to November – 2009

ℵ Company Profile :- Shaily Engineering Plastics Ltd (Shaily) had its humble beginnings in

1987 with 2 injection molding machines at Halol, Gujarat (Western most part of India).

Then In 1994 Shaily setup its second facility at Rania, Gujarat that is now the company’s

headquarters. Today, Shaily has four facilities with a total of 71 injection molding

machines ranging from 35TONS to 800TONS, including a dedicated ISO Class 8 clean

room manufacturing facility. Shaily has in the fiscal year 2007 undergone major

expansions to accommodate its growing business from clients such as Ikea, MWV and

Electrolux. Having cultivated a work culture of continuous improvement, Shaily constantly

invests in new technologies to provide our customers with the best possible product at the

lowest possible cost. We have in the past year setup a fully automated molding &

assembly line with high speed hybrid Husky injection molding machines to manufacture a

pharmaceutical packaging product for one of our customers.

ℵ Job Responsibilities :

φ Worked as a Senior Engineer Quality Assurance in the 100% export oriented unit in

the Shaily Engineering plastics.

φ I was responsible for the Incoming Inspection of the material which was received on

daily basis at Company receipt section.

φ Mainly I suppose to look in to the production of IKEA.

φ I was responsible for the stage inspection at production shop floor and pre-dispatch

inspection before the shipment.

φ The defined process flow from IKEA to be followed and coordinate with production

representatives to make it effective.

φ Responsible for the Quarantine Area and clear all the HOLD products by consulting

with management team and take corrective and preventive actions for the rejections.

φ Make the standardization of the Packaging of the IKEA products since it suppose to be

100% exported from INDIA to various countries.

φ Taken the special training from Swedes team of IKEA which was comprehensive

training for me to understand the IKEA Quality standards and Supply chain

management.

φ Also I need to attend the call of Customer complaints and take appropriate actions at

every step of manufacturing.

φ Responsible to make one point standards for the critical injection moulding defects.

φ Responsible to conduct housekeeping audit and maintain the cleanliness of the shop

floor.

Work Experience

ℵ Company : Molex Mafatlal Micron Privet Limited - Gandhinagar

ℵ Position : Engineer Quality Assurance

ℵ Period : From October – 2007 To May-2009

ℵ Company Profile:- Molex Mafatlal Micron pvt. Ltd. manufactures Automotive parts, DIN

Parts and MLX parts by injection molding process for international customers like BMW,

DC, Audi, Japan Defense and commercial market. Also Molex covered the local market and

customers are Mindasai, Mothersonsumi and Maruti motors.

ℵ Job Responsibilities :

φ I was responsible for the documentation of ISO TS 16949:2002.

φ As a part of automotive standard I was responsible for following requirements.

Lay out inspection with help of measuring equipments like Profile projector

(Coordinate Measuring Machine (CMM)), Venier Caliper and Micrometer screw

Gauge of all the parts once in a year to ensure the dimensional stability.

Indirectly it helps us to identify the life of Moulds, Spares of Moulds and

preventive maintenance schedule of the Moulds.

Conduct the Measurement System Analysis (MSA) – Attribute for the

subjective moulding defects like short shot, burn mark, shrinkage, silver mark

and shade variation.

Make complete product file with Process flow chart (PFC), Potential Failure

Mode effect Analysis (PFMEA) and control Plan (CP).

The schedule to be made for the pre-dispatch inspection for all the products.

φ I was a member of the Customer complaint reduction project team and being a

part of it I suppose to establish the control at each steps of the Process.

φ The visual displays for the inspection to be made for the sorting and assembly

division.

φ The inspection reports to be made to check the parts at Moulding stage in three

aspects i) Dimensionally ii) Visually and iii) Functionally.

φ As a part of effective inspection mistake proof gauges to be made for measure the

integral parts of the connectors. It helps to measure the small internal structure of the

mechanism of Terminal Position Assurance of the automotive connectors.

φ Develop the training moulds for the i) Automotive ii) DIN and iii) MLX series for the

connectors and help to make the training material of Wire Harness division.

φ The training material to be made for all the measuring instruments like profile

projector, Vision check machine, Vernier capliper and shore hardness tester.

Work Experience

ℵ Company : Woco Motherson Advance Rubber Technologies limited.

ℵ Position : Trainee Engineer + Engineer Quality Assurance

ℵ Period : From May-2006 To October-2007

ℵ Company Profile:- Woco Motherson Advanced Rubber Technologies Ltd (WMART) is a

joint venture between Motherson Sumi Systems Limited and Woco Industrietechnik

GmbH, Germany (WOCO), a leading tier-1 supplier for Automotive Anti Vibration Parts,

Motor Acoustic Parts and Rubber Technology Parts. The main customers of the WMART are

BMW, DC, Audi, RR and GM. WMART is situated in Kandla(Gujarat) Special Economic Zone

with state of art facilities spread over an area of 21600 Sq mtrs and has easy access to

Kandla and Mundra sea ports. WMART specializes in manufacturing high quality rubber

parts, rubber-plastic parts, rubber-metal parts and liquid silicon rubber parts.

Product range includes Bellows, Grommets, Sealing caps, Shock dampers, Cable

grommets, LSR precision parts, Gear covers, Cover plates and stoppers, Bellows, Pedal

covers and a wide range of Gaskets.

ℵ Job Responsibilities: As a Graduate Trainee Engineer Production.

φ At the initial stage of the career when I joined the Multinational organization the my

prime job responsibility to learn the Rubber Injection moulding production techniques

from our seniors and German faculties as they are the masters in the processing of

Rubber parts.

φ As a first step I was expected by my senior to learn and do the parts extraction

from the moulds up to 20 days. Daily when I come to the company up to 8 hours I

use to stand on the machine near the machine operator and help him to extract the

parts and learn that how to minimize the defected which can be generated by the

men.

φ In second stage I anticipated to learn and do the mould loading and unloading with

help of forklift and I was qualified forklift driver and passed the internal test of the

company.

φ Then I was likely to be inserted the set process parameters in the machine panel

and start the machine and remain there up to OK serial production.

φ At a defined frequency I suppose to do the preventive maintenance of the mould

like tighten up the insert & mould Nut Bolt, Oiling and greasing of the mould, Cleaning

of the mould and light polishing of the mould.

φ I was responsible to allocate the manpower on the machine on daily basis.

φ The responsibility of handling shift independently is assigned to me in case of absence

of our senior.

φ Review the status of ON HOLD parts the concurrence to be taken from our senior

team was also use to come under my purview.

φ Also I was responsible to give my input and develop the product as well as process

flow chart as a team member of the upcoming products.

φ In addition to that once in the month the team use to sit for the brain storming to

identify and eliminate the Non value adding activities and generation of

waste. I was expected to contribute in the meeting by applying the theory of

“Industrial Engineering” and taken training of “SPS”.

Work Experience

ℵ Job Responsibilities: As a Graduate Trainee Engineer Quality Assurance + Engineer

Quality Assurance.

φ During the second phase of my job span within the same company I was transferred in

the Quality Assurance department by reviewing my abilities by top management since

the company wanted to go for the certification of ISO TS 16949:2002.

φ As a part of the Quality Assurance team in first step I was expected to learn and do all

the requirements of the standard like Process Flow Chart (PFC), Control Plan

(CP), Potential Failure Mode Effect Analysis (PFMEA – By Cross functional

approach), Gauge Repeatability & Reproducibility (Gauge R & R), Process

capability Report (Cpk).

φ Also for satisfy the one of the requirement “Lay out inspection” I was likely to be do

Dimensional analysis by Profile Projector (Coordinate Measurement Machine (CMM)),

Video Check, Vernier Caliper and Micrometer Screw gauge.

φ In addition to that the publication and validation with help of our Manager Production

“Rubber mixing mill batch formula” use to come under my purview.

φ I was responsible to make the “Production Self Inspection Card”, “Finishing Self

Inspection Card”, Check points for the “Incoming inspection” of the Rubber

master batches and accelerators.

φ Moreover I was responsible for the Coordinating for taking the corrective and

preventive actions on receipt of the customer complaint by using the Quality problem

solving tools like fishbone diagram, 5-why analysis and 8D.

φ I was responsible to develop the rejection handling procedure & Quarantine area

handling procedure of each part family.

φ The method to be developed for the identification and tractability for track the material

production details.

φ The making of Production Part Approval Process (PPAP) by personally going to

GERMANY at our corporate plant (WOCO Industrietechink GmbH) and take

approval from the customer is also assigned to me.

φ I was responsible to develop the training material for the Profile projector, in house

calibration of the weighing balance, Rehometer and tensile test machine. If any

software update will come in these machine I suppose to be incorporated the same in

the training material and keep all the moulds live for use.

φ I am the certified internal Auditor of the ISO TS 16949:2002.

Extra Achievements for Industrial Organization & Development

Supplier Developed in China for Green House which is upcoming product of Irrigation

sector.

Developed molds from Taiwan for exporting product from Netafim India to across

Globe.

The Training is taken from NETAFIM ISRAEL at our corporate branch regarding to

Products and Supplier Development

Won Excellence award of 2008 in MOLEX for reduction of Customer complaints.

I have been trained at WOCO Industrietechink GmbH in Bad Soden-Salmuenster

Germany about the Advance Product Quality Planning (APQP) and other Quality

fundamentals.

I am certified internal auditor of ISO: TS 16949: 2002.

I am certified Lead Auditor in ISO 9001:2008.

Training, Teaching & Technical Skill Development

I attended the training on the “7 Habits of Highly effective People”, “What makes

the manager great” and “How to become good to great”.

I attended the training on Lean Manufacturing, Working in Teams & Creativity at

Ahmedabad management institute.

Basic Training of Why-Why analysis and KAIZEN.

I attended the training on Laboratory Testing at HASETRI in Indian Rubber Institute; in

this Training I learnt about Significance of Rubber, Various types of testing on

the rubber Articles, Statistical Analysis on Uncertainty, Laboratory

Accreditation and Proficiency Testing.

I attended the training program by Mr. HAM (Faculty form South Korea) on SPS

(Synchronized Production System).

Strength

Comprehensive problem solving skill.

Willingness to learn.

Good verbal and writing communication skill.

Working in Team.

Technical / Computer Skills

Operating System Used : Windows 98, Windows 2000, Windows XP

Application: Microsoft Office Word, Excel, Power Point, Outlook, Internet & Mail.

Software : MCOSMOS for Measurement device, MPACT for Process Flow Chart,

Control Plan, Potential Failure mode effect analysis. EMPRO full version (ERP

Software), SAP

Personnel Skill

I have a high self motivation toward work by working under unfavorable condition and I

make afford to meet every dead line.

I have an ability to grasp new concepts quickly & clearly to apply my knowledge and

experience for tackling tricky situation.

I have the ability hard work and to work as a team player by sharing information and

Co-operative with other, positive thinking and discussing other

Excellent planning ands organizational abilities with skills in identifying areas of

improvement and ensuring maximum capacity utilization.

Skilled in manpower planning for optimum utilization of available sources.

Co-curricular Activities

Participated as a Gujarati Traditional Singer in Cultural events in Cultural festival

“Zaphire” held at GCET (My College), Vidyanagar.

Contributed as a Host for the Cultural events in the State Level Technical

Symposium “Little Step” held at GCET, Vidyanagar.

Participated as a Skit member in the State Level Technical Symposium “Little

Step” held at GCET, Vidyanagar.

Won the first prize in the Skit competition and participated as a Gujarati

Traditional Singer in the Cultural events in the National Level Technical Symposium

“Imaze” held at GCET, Vidyanagar.

I got First Price in the New Year function in singing competition in “Molex Mafatlal

Micron Pvt. Ltd”

Language

Mother tongue : Gujarati

Other language : English

Other language : Hindi

Personal Information

Name : Parikshit V Trivedi

Nationality : Indian

Birthday : 28/08/1984

Address in India : A/303,Kishan Complex, Opposite to Yash Complex, Gotri Road,

Vadodara-390021, Gujarat, India.

Mobile in India : 0091-992-***-****

E-mail : *****************@**********.***

Driving license : Valid driving license in India

Contact this candidate