Project Engineer
Resume:
Curriculum Vitae
Ahmed Hosni Ahmed Ghonemi
Date of birth:
QC/QA Welding Inspection Engineer
Current job title:
Egyptian
Nationality:
(002)010******** – (002)011********
Contact phone no.:
***********@*****.***
Contact E-mail:
Kafr Meat Bashar, Minia El Kamh, Sharkia, Egypt –
Contact address:
P.O.Box 44756
Egypt
Current work location:
Confirmed
Capability of English language:
Do now PhD at Faculty of Petroleum and Mining Eng.
Educational qualification:
M.SC of Metallurgical and Materials Engineering 2012
B.SC of Metallurgical and Materials Engineering 2005
Faculty of petroleum and mining engineering,
Suez Canal University
Project effective date
Candidate availability date:
Professional work experience:
From 2009 till now
PETROJET: the Petroleum Projects & Technical Consultations Co. One of the Egyptian
Petroleum Corporation Companies
From April 2013 till now
Job title: QC/QA Welding Inspector
Benha Power Station 20” P/L
Project name:
Location: Benha,Egypt
Owner/Client name: GASCO
Project brief: Under construction of Pipeline 5 Km, including piping work(2000 diam. inch) of
launcher and receiver valve rooms
Team leader of QC group
Duties in the project:
Supervise Welder Qualification Test with client representative and issue
Welder ID Cards for qualified welders.
Update Welder Register.
Review material test certificates for compliance with standards and identify
materials and release for cutting. Check the filler wire and respective test
certificates.
Ensure incoming material inspection in liaison with Material
Controller/Store assistant.
Coordinate for NDT & Welder Qualification as required.
Liaise with Welding Engineer regarding WPS & PQR etc.
1
Curriculum Vitae
Ahmed Hosni Ahmed Ghonemi
Arrange for Client's representative for witnessing the welders test.
Monitor and record test parameters as required. Responsible for execution
& reporting of all examinations/inspections as per QA Plan
Responsible to notify NDE Coordinator whenever any weld is ready for
NDE.
From June 2012 till April 2013
Job title: QC/QA Welding Inspector
Project name: NEAG 1 surface facilities station at BAPETCO ( Badr Petroleum Company
Location: BAPETCO,NEAG 1
Owner/Client name: BAPETCO
Project brief: construction of surface facilities station, including piping work(14000 diam. inch)
Team leader of QC group
Duties in the project:
Supervise Welder Qualification Test with client representative and issue
Welder ID Cards for qualified welders.
Update Welder Register.
Review material test certificates for compliance with standards and identify
materials and release for cutting. Check the filler wire and respective test
certificates.
Ensure incoming material inspection in liaison with Material
Controller/Store assistant.
Coordinate for NDT & Welder Qualification as required.
Liaise with Welding Engineer regarding WPS & PQR etc.
Arrange for Client's representative for witnessing the welders test.
Monitor and record test parameters as required. Responsible for execution
& reporting of all examinations/inspections as per QA Plan
Responsible to notify NDE Coordinator whenever any weld is ready for
NDE.
From June 2011 till June 2012
Job title: welding inspector
Project name: Nubaria/Dahshour gas pipeline 42"/36", 170 Km,
Location: Al-Sadat
Owner/Client name: Gasco
Project brief: Construction of gas pipeline from Nubaria to Dahshour 42"/36",170 Km. 9 valve
rooms 9 HDD high ways crossing
Project start/End date: 3/2011 to 6/2012
Ensure that all welding activities (before, during and after) are carried out in
Duties in the project:
Accordance to codes, standards and approved procedures.
Supervise Welder Qualification Test with client representative and issue
Welder ID Cards for qualified welders.
Update Welder Register.
Review material test certificates for compliance with standards and identify
materials and release for cutting. Check the filler wire and respective test
certificates.
Ensure incoming material inspection in liaison with Material
Controller/Store assistant.
Coordinate for NDT & Welder Qualification as required.
Liaise with Welding Engineer regarding WPS & PQR etc.
Arrange for Client's representative for witnessing the welders test.
Monitor and record test parameters as required. Responsible for execution
2
Curriculum Vitae
Ahmed Hosni Ahmed Ghonemi
& reporting of all examinations/inspections as per QA Plan
Responsible to notify NDE Coordinator whenever any weld is ready for
NDE.
Ensure that consumable handling procedure is followed.
Verify the welder ID card ensures that they are qualified for welding
position and other requirements as applicable.
Monitor the preheat and inter-pass temperature as per approved WPS.
Liaise with the Company Site Representative / Supervisor for the conduct of
day-to-day quality related activities of the project.
Verify latest copies of all the QA/QC Procedures, QC plans and Work
instructions are available at site.
Verity calibration status of inspection and testing equipment are valid.
Carryout / Co-ordinate all inspection and test requirements of the project at
all stages as per the CQP.
Witness and interpret test accurately. Maintain inspection test status at every
stage of inspection. Ensure that all activities carried out are in compliance
with Quality requirements of the contract.
Compile and maintain pertinent records of inspection and test till the end of
contract or a retention period contractually agreed.
Identify and raise NCR's for non-conformities.
Verify corrective and preventive action taken for non -conformance.
Review all data - prepare documentation for final hand over
From Feb. 2010 till June 2011
Job title: QC/QA welding inspector
Project name: Dahshour compression station and 42" connection pipe line
Location: Dahshour
Owner/Client name: E-GAS
Project brief: Construction of compression station, including piping work(45000 diam. inch),steel
structure erection work (1100 ton), installation of equipment and machinery(200 ton ),
fabrication and installation of fire water tanks ( 3000 m ), flare (90m)
42" connection 4 pipe lines from valve room to the station
Project start/End date: 2/2010 to 10/2011
Team leader of QC group
Duties in the project:
Supervise Welder Qualification Test with client representative and issue
Welder ID Cards for qualified welders.
Update Welder Register.
Review material test certificates for compliance with standards and identify
materials and release for cutting. Check the filler wire and respective test
certificates.
Ensure incoming material inspection in liaison with Material
Controller/Store assistant.
Coordinate for NDT & Welder Qualification as required.
Liaise with Welding Engineer regarding WPS & PQR etc.
Arrange for Client's representative for witnessing the welders test.
Monitor and record test parameters as required. Responsible for execution
& reporting of all examinations/inspections as per QA Plan
Responsible to notify NDE Coordinator whenever any weld is ready for
NDE.
Ensure that consumable handling procedure is followed.
Verify the welder ID card ensures that they are qualified for welding
position and other requirements as applicable.
3
Curriculum Vitae
Ahmed Hosni Ahmed Ghonemi
Monitor the preheat and inter-pass temperature as per approved WPS.
Liaise with the Company Site Representative / Supervisor for the conduct of
day-to-day quality related activities of the project.
Verify latest copies of all the QA/QC Procedures, QC plans and Work
instructions are available at site.
Verity calibration status of inspection and testing equipment are valid.
Carryout / Co-ordinate all inspection and test requirements of the project at
all stages as per the CQP.
Witness and interpret test accurately. Maintain inspection test status at every
stage of inspection. Ensure that all activities carried out are in compliance
with Quality requirements of the contract.
Compile and maintain pertinent records of inspection and test till the end of
contract or a retention period contractually agreed.
Identify and raise NCR's for non-conformities.
Verify corrective and preventive action taken for non -conformance.
Preparing test packages including verification of welding completion,
preparing welding summary sheet to insure completion of welding &NDT
testing as per project specification.
Follow up the clarification of punch list
pre-commissioning coordinator
Prepare documentation for final hand over
From April 2009 till Feb.2010
Job title: NDT Inspector
Project name: Sohag/Aswan gas pipeline, 30", 400 Km
Location: Sohag/Aswan
Owner/Client name: Gasco
Project brief: Construction of gas pipeline, 30", 400 Km, 13 valve room station 1HDD 1500M FOR
River Nile crossing off take SOHAG- MUBARAK 10"- 2km
Duties in the project: Preparation of NDT procedures according to codes
Preparation of NDT Scope according to project specifications.
Endures that qualified and competent operatives undertake NDT work.
Advises where NDT techniques are considered unsuitable and where the
competency of the operative might be questionable.
ensure that Construction Contract or complies with the requirement of
the approved contract quality plan, including all the sequential insp ection
operations associated with weld preparation, fit up, weld execution and
testing. All non-conformances shall be reported and recorded.
Witness inspection defined within the PTJ Company’s Inspection & Test
Plan.
Carry out all nondestructive test such as visual inspection, UT tests, RT
interpretation, and MT, PT inspection
Analysis of welding defects causes and its extent to take the necessary
corrective action to eliminate the defects sources.
Inspect and controlling all NDT equipment and ensure that they work
properly and calibrated.
Reporting the daily activities
4
Curriculum Vitae
Ahmed Hosni Ahmed Ghonemi
From Feb. 2008 till April 2009
ENERGYA Steel Fabrication (ENERGYA Steel Solutions)
Job title: QC/QA Welding Inspector
Project name: Many Projects like (Cement factories, electric power stations,
pressure vessels……)
Location: Egypt
Many like (FLSMIDTH, Metito, UHDE, Moody, HITACHI …)
Owner/Client name:
Project brief: Fabrication of cement factories, electric stations, steel structure and
plate work …..
Duties in the project:
Contributing with a team for preparing ASME certificates of
Authorization U, S, A, PP and R certificates
Material Control Inspection
Manage and supervised inspectors team.
prepare and complete the projects files
Preparation of NDT procedures according to codes
Preparation of NDT Scope according to project specifications.
Endures that qualified and competent operatives undertake NDT work.
Advises where NDT techniques are considered unsuitable and where the
competency of the operative might be questionable.
ensure that Construction Contract or complies with the requirement of the
approved contract quality plan, including all the sequential inspection
operations associated with weld preparation, fit up, weld execution and
testing. All non-conformances shall be reported and recorded.
Witness inspection defined within the PTJ Company’s Inspection & Test
Plan.
Carry out all nondestructive test such as visual inspection, UT tests, RT
interpretation, and MT, PT inspection
Analysis of welding defects causes and its extent to take the necessary
corrective action to eliminate the defects sources.
Reporting the daily activities
From Feb. 2006 till Feb. 2008
AMERON EGYPT COMPANY (CCP-Concrete Cylinder Pipes and Fitting manufacturing)
5
Curriculum Vitae
Ahmed Hosni Ahmed Ghonemi
Job title: QC/QA Welding Inspector
Many Projects like (New Cairo pipe line1000 mm, Balayna 800,600mm
Project name:
Location: Egypt
Owner/Client name: Many
Project brief: Fabrication of pipes
Testing all raw materials received (Sand – Cement – Steel
Duties in the project:
Inspection Welding sheet steel or rod (Visual – penetrant test –
Mechanical test
Ensuring that applicable elements of the quality control system are
strictly complied with as determined by contract specifications.
Maintaining and implements quality control standards and procedures.
Evaluating test results and monitoring of the manufacturing process to be
in compliance with the process standards.
Giving technical supports to customers on quality matters.
Technical Approvals Certificate and training
Course Trainer
Detection (Welding& NDT
Level II in radiographic examination according to ASNT.
Consulting office)
Level II in radiographic examination according to ASNT. Petrojet
Level II in ultrasonic examination according to ASNT. Petrojet
Level II in magnetic particle examination according to ASNT. Petrojet
Level II in dye penetrant examination according to ASNT. Petrojet
Visual Inspection Test (VT). Moody office
Elazher university, physics
Handling and protection against ionizing radiation
department.
Corrosion & Corrosion Control in petroleum Industries High Technological Institute
Cathodic Protection High Technological Institute
Corrosion Prevention and coating surfaces High Technological Institute
Safety and Health Egyptian Welding Academy
English course (fresh start) Cairo university
TOEFL Local at Faculty of education Suez canal university
B.SC. Project “Corrosion & Corrosion Control in petroleum Faculty of Petroleum and mining
production and transportation. engineering
6
Curriculum Vitae
Ahmed Hosni Ahmed Ghonemi
Work Published at Journal
'Girth weld fitness after multiple SMAW repairs’ Pipeline and gas journal vol 240 no. 1 2013
Personal Skills
Motivated and able to work effectively under pressure.
Cooperative and Works in a team effectively.
Innovative, observant with safe, economic and wise administration.
Able to learn new tasks quickly.
Excellent computer and internet user.
Good knowledge of Microsoft office programs, (Word, Excel, Access PowerPoint).
Arabic: The mother tongue.
English: Fluent in (reading, writing and talking).
References will be available upon request.
7
Contact this candidate