Supervisor Engineering
Resume:
MICHAEL CAPUTO
Palmdale, CA. 93552
Cell: 661-***-****
Email: *********@*****.***
Objective:
To acquire a position in the field of Engineering in which I can use and expand my 25 year based skill set.
Professional Background:
JT3, LLC. Edwards AFB, CA. 1997- 2013 Field Engineer III
Supervisor: Rich Taylor 661-***-**** Okay to contact this Supervisor
Hours per week: 40
Security Clearance:
Cleared by Defense Security Service (DSS).
Electronic Warfare (EW) Facilities Site Support:
Evaluated and implemented Facilities change proposals for new construction and modification to existing facilities, monito red contractors,
subcontractors and vendors to ensure compliance with all federal, state, local, and Air Force regulations regarding environme ntal issues, industry
standards and customer Statement of Work requirements. Conduct field Site Surveys. Create 2 Dimensional or 3 Dimensional detail drawings
with architectural, mechanical, electrical and engineering fundamentals. Convert AS -built board drawing to AutoCAD format. Provide technical
guidance on system capacity and performance issues. Write takeoff estimates on new drawing proposal packages. As a lead Drafter my
responsibilities included coordinating and actively participating in construction project meetings. Delegated work assignment s, write annual
employee evaluations and weekly and monthly status reports.
Electronic Warfare (EW) Engineering Site Support:
Evaluated and implemented engineering change proposals. Generated new engineering design sketches. Develop 2 Dimensional and 3
Dimensional drawings using AutoCAD or Solid Works formats. Provide tec hnical and drafting support to test engineers, systems engineering
team, master architect, and site operations staff. Create to scale detail drawings of various Radio Frequency (RF) Antennas, Antenna mounts and
associated parts, CEESIM (Combat Electromagnetic Environment Simulator) transmit carts and associated equipment/parts, RAM (radar
absorbent material) layouts for the support of various test mission configurations.
Electronic Warfare (EW) Configuration and Data Management:
Monitor contractors, subco ntractors and vendors to ensure that the applications of customers and industry standards and requirement for the
statement of work are properly implemented. Develops and establish configuration management documentation based on program re quirements.
Ident ify requirements and coordinate development and implementation of computer based configuration, data management systems and
electronic data support. Provide work direction to subordinate work unit personnel. Attend Configuration Control Board (CCB) record minutes
and action items from programs and projects. Identify configuration management tool requirements and implement configuration management
systems. Prepares and approves Configuration Management Plans. Perform other configuration management related du ties and assignments as
directed.
Electronic Warfare (EW) Site Support Maintenance :
Oversees facility maintenance, repair, or alterations Direct, install, operate maintain and repair aircraft Electronic Warfar e Ground Test
Execution Mission Support Equipment (EWGTEMSE) to support aircraft avionics testing at the Benefield Anechoic Facility. Install, modify,
test, repair, overhaul, calibrate, maintain, evaluates, and certifies new and existing electrical systems/circuits, generator s, transformers,
switchboards, controllers, motors, circuit breakers, heating units, conduit systems and transmission equipment. This includes all sy stem and
associated hardware 600 volts or less, 400 cycle and 60 cycle power, explosion proof system, industrial lighting, environm ental control system,
batteries, chargers, fire system, water sewage and fuel pumps. Operation of 40 ton aircraft hoist, hydraulic test equipment, Polyalphaolefin
(PAO) system under test. Uses test equipment and BITE information to investigate, test, calib rate, analyze, isolate, and correct malfunctions on
the Energy Management System (EMS) and other integrated systems electronically and manually. Maintains all records of changes to any
technical orders, applicable regulations and operating instructions. Provides technical guidance and performs on-the-job training for all
technicians. Follow all safety practices and procedures to maintain a safe and clean working environment.
Preventive Maintenances:
Perform PMI’s and daily operational checks on mission critical equipment such as frequency converters, diesel generators, UPS motor generators
and substations to evaluate and determine whether or not facilities are operating within prescribed standards. Use computers to create database
reports, maintenance history and provide cost analysis a time lines for major projects. Operation of 40 ton aircraft hoist, hydraulic test equipment,
Polyalphaolefin (PAO) system under test Determines whether systems are acceptable and safe within prescribed tolerances for s upporting
Electronic Warfare (EW) ground tests.
Ramada Inc. San Diego CA. 1990 - 1997 Engineering Technician
Supervisor: Canyon Williams 619-***-**** Okay to contact this Supervisor
Hours per week: 40
Responsible for engineering design of various projects Position demanded complete “cradle to grave” project oversight. Responsibilities included
Perform Site Surveys, Converting AS-built drawing to AutoCAD format. Engineering design. Parts and material procurement. Assembly and
installation of network systems, air conditioning, plumbing and electrical systems. Logistics and Tool room control. Develop and recommends
changes in procedures for more safe and efficient maintenance. Develop JHA (Job Hazard Analysis) for identifying hazards on a ll maintenance
tasks. Delegated work assignments and wrote annual employee evaluations.
San Joaquin Chemical Inc. Lakeview Terrace, CA 1980 -1990 Field Supervisor/Designer
Supervisor: James Alewine 209-***-**** Okay to contact this Supervisor
Hours per week: 40
Performed as facility Field Supervisor/Designer Responsibilities included Field Site Surveys, Logistics and Tool room control . The operations
and maintenance of large commercial HVAC systems, AC refrigeration, and cooling towers, high and low pressure steam boilers and wastewater
treatment. Installed and maintained water treatment systems for many businesses including City of LA Waste Water Treatment Pl ant. Performed
polymer applications and deep-well injections. Additional duties included development of drawings and rough sketches for assemblies and
details of air conditioning, piping, electrical, and architectural systems as well as underground utilities Convert AS -built board drawing to
electronically formats.
Significant Accomplishments:
Designer/Drafter: F-22 auxiliary power unit blast shield panels for 4 aircraft shelters at Edwards Air Force Base (AFB).
Designer/Drafter: Telemetry antenna platforms for the F-22 Combined Test Force Edwards AFB.
Designer/Drafter: F-22 Combined Test Force Public Address System Edwards AFB.
Designer/Drafter: Instrumentation connector bracket for F-22 Combined Test Force Edwards AFB.
Designer/Drafter: Instrumentation global positioning systems control panel for F-22 Combined Test Force Edwards AFB
Designer/Drafter: Telemetry antenna platforms for the Joint Strike Fighter Combined Test Force Edwards Air Force Base.
Designer/Drafter: Orbit and Scientific Atlantic Positioner support structural footings for Site Support Division 412th Electronic Warfare Group
Edwards AFB.
Designer/Drafter: Various Antenna support brackets for Site Support Division 412th Electronic Warfare Group Edwards AFB.
Lead Designer in the development of a flight simulator (F-16 Mini-dome) project at the Integration Facility for Avionic Systems Test (IFAST),
building 1020 Edwards AFB.
Designer/Drafter: Water treatment control systems for heating ventilation air conditioning (HVAC) for Southern California Edison.
Designer/Drafter: Water treatment control systems for heating ventilation air cond itioning (HVAC) for MAY Co. and Robinson department
stores.
Designer/Drafter: Heating ventilation air conditioning (HVAC) systems for General Telephone & Electronics Corporation (GTE) phone
companies.
Education / Training:
Carrier School: A/C Refrigeration.
North Valley Occupational Center: Business.
PELCO Video Security Institute: CCTV, Digital Solutions.
HIRSCH Electronics: Egress System, Fiber Optic.
Network and Controls.
Quality training AFFTC: AFMC metrics and the team member course.
Computer Sciences Corporation / JT3, LLC: Frontline leadership school.
Discovery Engineering Training Center: Advanced Computer Aided Drafting/3-D Modeling.
Bentley Program: MicroStation V 07.01.
Plant 42 (Palmdale, CA): Catia V5.
AutoDesk, Inc. Autodesk 2012, 2010, 2009, 2007, 2006, Auto desk Map 3D, Civil, CAD Overlay, 3D Studio VIZ, Autodesk 2004, 2002, 2000I,
2000, R14, R13, 10.
GIS Mapping.
General Purpose, Ray-Based Electromagnetic Analysis Software: Flight Simulation Software.
Math Lab.
American Red Cross: First Aid, CPR/AED
MAXIMO: Data Base Program
New Horizons: MS Word-Level 1, 2 & 3, .MS Excel-Level 1, 2 & 3, MS Access-Level 1 & 2, MS PowerPoint, MS Project, Visio, Solid Edge,
Solid Works, Pro E, Corel Draw, Adobe Photo Shop.
SIEMENS programming, vision graphic engineering.
Forklift Certified, Scissor Lift Certified, Aircraft Hoisting, Aircraft Cooling
Accomplishments:
JT3 Safety Award February 2012
JT3 Team 4th Quarter / November 2011
JT3 Employee of the 4th Quarter / November 2011
JT3 Team of the Year 2010
JT3 Employee of the 4th Quarter / March 2009
JT3 Electronic Warfare Site Support Team 3rd Quarter 2009
F-22 Team of the Quarter 3rd 2005
People Voice Award Peer Recognition 2001
Award of Merit for Outstanding Achievement 1990
References:
Name Employer Title Phone
Hans C. Lambrecht JT3/Spiral RF Measurements Supervisor 661-***-****
Dave Cooper JT3/Spiral Branch Supervisor 661-***-****
Keith Scott U.S Government Electronics Technician NJ3 661-***-****
George Demirjian U.S Government 772 Test Squadron Technical Expert 661-***-**** Indicates professional reference
Contact this candidate