The Short RESUME

Jalil Hadialhejazi

I am interesting for “H1B visa sponsorship Oil & Gas job” Professional Rotating Equipment

Engineer, Lead Mechanical Engineer, Technical Consultant and Executive Project & Maintenance

Manager, in Texas USA

acb6kw@r.postjobfree.com – Mobil: +98-912-***-****

Objective

To continue my career (Expert Mechanical Engineer) as a Managing Director’s in my company, that is at

the forefront of technological innovation in Pump and Compressor technology, machinery, Oil & Gas plant

Surveying, Commissioning and Start-up, troubleshooting, maintenance & overhaul of rotary machinery,

Seals & machinery parts design & reverse engineering, research and development.

Strengths:

Talent intelligence.

•

Six Sigma Manner.

•

• Extensive knowledge of petroleum industry, Managing Maintenance Projects & Planning New Projects.

• Oil & Gas Plant Equipment’s Design and Strong analytical and problem solving skills.

• Details oriented and able to work in a group setting as well as individually.

• Experience conducting quality assurance of facilities crude oil refining, manufacturing and production of

pump technologies.

Preventive and predictive maintenance concepts, centrifugal and reciprocating engines and

•

compressors, Steam and Gas turbines, Gas compressor and surge controls.

• Ability to effectively prioritize workload in terms of importance and urgency.

• Excellent communication skills and able to deliver a speech in front of a large audience.

• Knowledge of conducting project feasibility studies.

• Experience with facilitating overseas operations.

Subject Matter Expert (SME) concerning matters hydraulic design.

•

• Deep knowledge of machining methods, coatings, anodizing and casting.

• Familiars with Plant process and Control, oil well down & upstream Equipment, Drilling, Oil Reservoir

study and Technical Evaluation for, pump lifting(Reda Pump) gas lifting, gas injection and water injection.

• Machine parts “Design and Manufacturing” and Equipment Refurbishment.

Rotating Equipment Specialist, Maintenance, Fault Finding, Vibration & Thermal Vision Analyzing.

•

Refinery Equipment Design and Technical Bid Evaluation (TBE) and reports for equipment and

•

packages along with the acceptable deviation list. .

Professional in pump design for all Industries, Pump manufacturing, Innovation & teaching.

•

Materials Handling By Pump. In Food Industry, Mining, In Ports & Dams, Water Treatment’s

•

Industry, Sewage & Surplus Water.

Various type seal technology, advice, support & Design.

•

Vales & Control valves Parts Repair, Design Review, Maintenance & Regeneration’s.

•

First Design and manufacturing of Seed Vales locally in Iran.

•

Metallurgy & Materials Selection Due to Media, Chemical & Physical Properties.

•

Industrial production planning, and packaging.

•

• Management, Planning, Project control, Energy management, Fuel management, Heat Transfer.

Registered to: World Pump, HI, ASME & …..

•

Work Experience

HAADI (my private company) Tech. Consultant & Contractor in Oil & Gas Industries

1

Position: Managing Director, Tehran, Iran October 2007 up to Now

Accomplishments

Due to my technical knowledge and experience, I have not any difficulty to demonstrating it, in my

personal career, during my any jobs periods. Managing the personal group, Technical guidance and the way

to doing his job in the best conditions.

RESENT JOB: Tech. Consultant / Design / Manufacturing, Location: Tehran

First Unit Refinery Inlet Line, Cured oil Auto Sampler Design and manufacturing in Iran.

Responsibilities as a Tech. Consultant & Contractor Company:

Plant design surveying, Fault finding, Researching, Modification & upgrading, Disordered Equipment &

Parts Design and Manufacturing, Plant Commissioning, Start-up & Operation as Contract Condition’s.

Job history summary:

• Feb. 2012 to March 2013: “Enersul Canada, GXM3(TM) Sulfur Granulation Plant”

Location: Imam Khomeini Refinery, Shazand, Arak. Iran

• April 2010 to June 2010: Hosseini Petrochemical Private Co. Power Plant Existing second hand 8-MW

Steam turbine, recalculation, end stage of rotor dismantling for power reducing to match existing second

hand overhauled, 6-MW generator.

Location: Ghom, Iran.

• November 2007 to December 2009:

ο Neka- Ray New crude oil Pipeline Four Pump Station’s, (nine units, 2.8 MW & five units 0.8 MW

“RUHR POMPEN” Germany, EM driven crude oil transfer pumps). Over hauling one of the 2.8 MW

pump, due to mal-operation by the end user personnel after the initial, start up.

Location: Neka-Ray, Tehran. Iran.

ο Ray-Tabriz Existing Pipeline, Four New Pump Stations. (Twelve units 2.3 MW “RUHR POMPEN”

Germany, EM driven crude oil transfer pumps).

Location: Ray-Tabriz, Iran.

ο Neka-Ray Crude Oil Positive Displacement Rotary Metering & Control System FMC package (Control

& monitoring panel’s Fault finding) commissioning & start-up.

Location: Ray Crude Oil Receiving Tank Farm Station, Tehran. Iran.

• March 2008 to August 2008: Sandvik Sulfur Pastillation Processing Plant Equipment’s from Germany.

(Two unit Control valves, recalculation and rebuilt, due to the manufacturer faulty)

Location: Ilam Gas Refinery Co. Ilam, Iran

Head of Maintenance Mechanical Engineering Department

Iranian Offshore Oil Company Tehran, Iran 1979 to 2007

Location: Bahregan, Kharg Island, Sirri Island, Lavan Island Districts Crude Oil Production & Purification

offshore and onshore Areas, Persian Gulf, Iran.

Responsibilities:

• Mechanical senior engineer in Tehran head office, (titles: Civil, Electrical, Instrument & Mechanical

engineering jobs) Supervising all maintenance sites & New Projects in all the above areas.

• Pre-commissioning, commissioning & startup of new rotary machinery (pump packages, gas & air

compressors packages, industrial diesel engines, gas turbine packages, generator packages).

• Faultfinding, trouble shooting, innovation and modification of all Rotary machinery and plant’s Fixed

equipment for achieving the best operational goal and reducing the cost of operation. (for example: Sulzer

gas compressor dry seal damaging during two month, vacuum pump shaft fatigue, Gas turbine gen. set

coupling broken, sea water deep well pump shaft broken, diesel gen set voltage regulating electronic fault)

• Technical evaluation of all materials and equipment ordered for those sites by the maintenance &

production departments. Technical Bid Evaluation (TBE) reports for equipment and packages along with

the acceptable deviation list.

• Refinery Fixed Equipment's technical faults Evaluation & Researching, Recalculation to renovation & up

2

grading the qualification for the best operation condition of equipment’s due to changing Wells crude oil

properties conditions during Production and materials ordering (as a metallurgical & mechanical engineer).

• Producing of data sheets & technical documents for ordering all rotating machinery: (pump packages, gas

& air compressors packages, industrial diesel engines, gas turbine packages, generator packages).

• Production equipment’s (water purification plants, R.O. package, desalter, crude oil well control

packages, crude oil direct fire heater, and nitrogen producing plant).

• All types of fixed offshore & mobile cranes, for all above districts Crude oil production areas.

• Pipeline design (Carbon steel Crude oil & Polyethylene Persian Gulf bed natural water supply pipeline).

• Fully authorized engineer from IOOC for interviewing of Engineers (BS, MS&PHD in Mechanical,

Presses, Civil, Inst. & Elect.) for recruitment in the company during 17 years of my services for the IOOC.

• Consultant the manager for the new projects and any modification in the above districts.

Innovation, renovation and pump performance up grading, design and manufacturing of deferent type of

centrifugal pumps and parts. Vortex solid handling centrifugal pump Manufacturing, (that it is in operation

now, Excavator and mud dragging centrifugal pump in pilot model condition stopped).

• Familiar with standard: API, ASTM, ASME, NACE, ISO, AGMA, ANSI, AISI, BS, (SUDIC) Canada,

NFPA, NEC, NEMA, DIN, TEMA, AWS, SAE, VDE, UL, MIL, JIS, IEC, GOST, EN, CNELEC.

• Familiar with approval & marking: UL, FDA, TUV, CE, ATEX, ASHRAE

• User of Microsoft Office: Word, Power point, Excels

• Familiar with: Auto CAD, Thermal picture Equipment fault finding, Vibration analyzing.

Iran Pan American Oil Co. March 1977 to September 1979

Responsibilities:

I was Head of maintenance (predictive and preventive maintenance) in off shore oil Production Platform,

Forozan, Kharg Island, Iran, with 220,000 BPD crude oil production field.

After the revolution, this company is goings amalgamated with other four Iranian/Foreign oil companies

and were called the Iranian Offshore Oil Company (IOOC).

Summer Jobs in Iran:

Piping& Pump installation & repair, Home Applica. Equipment’s Repair, Bank Accounting, Cabling &

Lighting, Legal Low, Insurance Agent, Vegetable Drying & Auto Packaging Equip. Maintenance, Iran Ball

Bearing Co. Production Planner, Applied ME/En. Teaching, Mold (Punch, Forms & Inject.) Design &

Manufacturing, Gas fireplace Design (“Azmayesh Co.” Home Applica. Equip. Manu. Ind.)

Education:

• Graduated Bachelor of Science in Mechanical, industrial production engineering.

Tabriz State University, Tabriz, Iran with GPA 3.333 1972 to 1976

• Undergraduate in Industrial Production Planning, Machine Parts & Mold Design & Manufacturing

(Engineering Technology).

Tehran State Technical Collage, Tehran, Iran with GPA 17 / 20 1968 to 1970

Military Service: Service Country: Iran, Branch: recruit for the army, Rank: lieutenant

September 1970 to August 1972 I was very successful during my military service.

Computer skills: Microsoft office (word, excel, PowerPoint …) Auto CAD, SAP,

Language: Persian, English, Azerbaijani, Kazakh, Turkish, Turkic, Uzbek

Hobbies: Sport, Technical book studying, Research & Development.

Best Regards

J.h.Hejazi

3

4

Contact this candidate