PERSONAL RESUME
PERSONAL DATA.
Name : Cheong Wooi Choon.
Nationality : Malaysian.
Date of Birth : 05 October 1981
Nric No : S8163813F. (Singapore PR)
Sex : Male.
Marital Status : Married.
Race : Chinese.
Contact No H/P : +84-136*-***-****.
Email Address : acap0a@r.postjobfree.com
Address 1 : Blk524, Woodland Dr14, #12-423, Singapore 730524
Language : English, Malay, Mandarin & Cantonese
Position Desired : Electrical & Instrumentation Senior.
Years of experience : 15 years. (1998 ~2013)
Qualification / Achievement.
Mar'05 - Sep'06 Polytechnic Ungku Omar, Perak Malaysia.
(Electrical engineering).
25th October '06 Polytechnic of Electrical PW3,
(Under Malaysia Government Suruhanjaya Tenaga)
31th October '07 Diploma In Electrical Engineering PW4,
(Under Malaysia Government Suruhanjaya Tenaga)
13th -19th May'02 Risk Improvement Services Pte Ltd
Certificate of Metal Scaffold Erection Course.
July'01-Jan'02 Institute Of Technical Education Singapore
Certificate in Basic Education for Skill Training (BEST).
Jan'94-Dec'97 Sekolah Menengah Methodist (A.C.S)
Anglo-Chinese Secondary School Kampar, Perak, Malaysia.
Computer Literacy.
Microsoft office (MS Word, Excel, Outlook)
Overall Working Experience And Ability.
> Installation of cablings, lighting & power system, and ACMV system,
earthing & lightning protection system, security system and include the
testing and pre-commissioning work.
> Familiar with follow measurement system related to process control in
wafer plant, petrochemical plant, chemical plant, power plant, Shipyard,
FPSO and oil & gas industry. And ability to read and understand technical
drawing and P&ID drawing.
>
> To performed testing and commissioning on various electrical and
instrument equipment such as pressure transmitter, pressure level,
temperature sensor, magnetic flow transmitter, pressure gauge, solenoids,
butterfly valve, pneumatic valve and etc. This include fabrication,
installation, erection, loop check and pre-commissioning work for
electrical control system, interlock system simulation test as analog
input/output and digital input/output signal to HMI, troubleshooting with
FMCS and PLC.
> Hand on experience with instrumentation, calibration work and control
system this includes completed with FAT (functional acceptance test) and
complete with Protocol test report.
> Provide technical support for maintenance, operation and site co-
ordination and liaising work with plant process and plant engineer or
main contractors.
> Able to prepared documentation work for approval submission, preparation
of excel/word documents such as power/control cable schedule, termination
detail, list of instrument I/O listing, operation and manual preparation
and daily progress report. Ability to interact with people at all level
and willing travel to anywhere if require and long workings hours.
> Involves in Supervision inspection, co-ordination all levels, conduct
quality audit checks on subcontractors, compilation of all discipline
reports accordance with good Manufacturing Practice.
> Hands on Electrical design work such as lighting, power, cable support
system like conduit, cable tray, cable ladder, cable trunking. And
switchboard design and power consumption calculation.
History of employment (1998 ~ 2008)
Employer Name : Dyna-Mac Engineering Co., Ltd
Project : FPSO CIDADE DE ILHABELA (Guangzhou, china
Dockyards)
Position Hold : Electrical & instrument Lead.
Period : May in 2012 until On-going..
Job Involved : Responsible for all E&I installation work, client
coordination, material take-off and to supervised sub-
contractor to complete all installation work as per client
(SBM) construction drawing and relevant project
specification.
Employer Name : Hyunda Eng Co., Kr
Project : OUH (Oversea Union House) & ROYCE ROLL SELETAR
AEROSPACE. (Singapore)
Position Hold : Electrical & instrument engineer.
Period : Mar in 2010 until Jun 2011.
Job Involved : In-charge of all Instrumentation & Electrical
installation work c/w testing & commissioning and included
design of electrical system. And support for tendering of
new Electrical & instrumentation work.
Employer Name : Jurong Shipyard Pte Ltd. (Singapore)
Project : Sea Drill Petro Rig III Semi-Submersible
Deepwater)
Position Hold : Senior E & I Commissioning.
Period : Nov in 2009 until Jan 2010.
Job Involved : To supervise construction activities, related to
all Instrument works, performed by contractor and
subcontractor or direct hired labor force and calibration of field
instrument transmitters such as pressure, flow and
temperature also the fire and gas Instruments. Supervise and
Perform loop checking on HVAC system Include Function Testing of HVAC
Pneumatic Fire Dampers and Function Testing cause and effect
testing, prepared check sheet or loop folder after
testing.
Employer Name : Air Liquied Engineering Sea Asia
Project : Singapore Shell Meg (SSM, Jurong island Singapore)
Position Hold : Electrical & instrument supervisor.
Period : Jan in 2009 until Aug in 2009.
Job Involved : In-charge whole plant of electrical and instrumentation
work, attend site weekly meeting, check as built drawing to
conform site specification and to supervise contractor for
the E&I installation work to comply Singapore standard and
site requirement and involved witness test for the
electrical and instrument system.
Employer Name : Haven Automation Industries Pte Ltd
Project : Armada Perdana OYO Development FPSO Project
Position Hold : Senior E & I Commissioning Technician.
Period : June in 2008 until Dec in 2008.
Job Involved : Supervises, monitor and assists sub-contractor in
instrumentation construction works such as installation of
process instruments, Fire & Gas System, Telecommunication system and
control room equipments. Do the punch lists as per project
specifications, review the construction drawings and
prepare work package to guide sub-contractors during construction.
Name Maincon : M+W Zander Pte Ltd, Singapore, German Center.
Employer Name : Kurihara Kogyo Co., Ltd, Singapore.
Project : Silitronic Samsung FAB 300-3 FMCS.
Position Hold : Commissioning, Loop check and Logic System Test
Technical.
Period : July in 2007 until May 2008.
Job Involved : To carry out all the control cable and network
loop check, and understanding on scada and FMCS work,
responsibility on FAT (functional acceptance test) with maincon,
calibration of instrument/sensor, completed logic system test and
liaise with client, prepared protocol test report for
approval submission.
Employer Name : Total Automation Ltd.
Project : FPSO KIKEH ( Malaysia Deepwater Floating Terminal
)
Position Hold : Onshore and Offshore F & G technician.
Period : Feb in 2007 until Jun in 2007.
Job Involved : Supply to onshore hook-up and carry over work of
FPSO KIKEH project. Conduct systems loop checks, punch
listing, organize material and rectification works. Cause and effect
testing and instrument calibration on Foam Distribution,
Fire Water and Smoke and Gas Detection Systems on FPSO.
Employer Name : ConocoPhillips China Inc.
Project : Bohai Phase II Development (FPSO)
Position Hold : Electrical & Instrumentation Commissioning tech.
Period : Feb 2006 until Jan in 2007.
Job Involved : Assigned to clearing ITR punch list and mechanical
completion survey. Carry out testing & commissioning of
field devices such as level monitoring, flow monitoring,
pressure transmission and functional checking of the ESD
system control valves. Assist client on system startup.
Employer Name : Sembawang Shipyard (Singapore).
Project : Erha Field Development- FPSO Project.(Esso).
Position Hold : Senior E & I Commissioning Technician.
Period : July in 2005 until Jan in 2006.
Job Involved : Assigned to clearing ITR punch list and mechanical
Completion survey. Perform loop checking, filed
instrument troubleshooting and pressure test of impulse tubing for sea
water system on top side modules. Carry out testing &
commissioning of the Ballast Water Tank, Cargo Tank and
control valves system.
Employer Name : Rotary.
Project : FPSO ERHA Project.
Position Hold : Electrical And instrumentation Tech..
Period : Feb 2005 until Jun in 2005.
Job Involved : Responsibility on hook up, punch list and construction
work on electrical and instrumentation work, fire, gas and
flame detector, MOV, Penumatic valve.
Name Maincon : Halliburton Batam (PTBRI).
Employer Name : Total Automation Singapore Pte. Ltd.
Project : Belanak Natuna FPSO project.
Position Hold : Offshore Senior F & G technician
Period : Dec in 2003 until Sep in 2004.
Job Involved : Supply to Halliburton for offshore hook-up and
offshore carry over work of Belanak Natuna FPSO
project. Conduct systems loop checks, punch listing, organize material and
rectification works. Cause and effect testing and
instrument calibration on Foam Distribution, Fire Water
and Smoke and Gas Detection Systems on FPSO.
Name Maincon : Taikisha Pte Ltd, Singapore branch.
Employer Name : Kurihara Kogyo Co., Ltd, Singapore.
Project : Kimberly Clark Pte Ltd, Singapore.
Position Hold : Electrical Site Engineer.
Period : Nov in 2002 until Nov in 2003.
Job Involved :In charge and responsible for the cable laying
HT/LT/ communication system, power/lighting,
lightning & earthing protection system, fire alarm system, testing and
commissioning work, site coordinate, and supervise sub-contractor to
do all the electrical works are in conformance to the technical
specification and witness various functional test of the
electrical equipment and control system till project handover.
Employer Name : Halliburton Far East Pte Ltd.
Project : Shell Sea Eagle FPSO Development Project.
(Sembawang Shipyard Singapore).
Position Hold : Instrument Technician
Period : Apr in 2002 until Aug in 2002.
Job Involved : Responsible for loop checking, assist in field
instrument calibration and troubleshooting supporting
process functional checking and testing commissioning of flash Gas and
Export Gas compressor system.
Name Maincon : Riken Keiki Co., Ltd. Singapore Branch.
Employer Name : Kurihara Kogyo., Ltd Singapore.
Project : AFPD Toshiba Pte Ltd, Singapore. (Wafer plant)
Position Hold : Gas Detection management system and FMCS Process
System.
Period : May in 2001 until February in 2002.
Job Involved : In charge of Testing and Commissioning work of
FMCS control system such as MAU, Exhaust, DSP, Glycol chiller,
PCW, etc, and communication system such as voice, data and
wireless. And to assist sub-contractor to do installation work of
instrument/sensor as meet in P&ID and technical site plan
drawing requirement and communication cabling work such as
RS45, fiber optic, UTP/STP cable and coaxial cable.
Name Maincon : M+W Zander Pte Ltd, Singapore, German Center
Employer Name : Kurihara Kogyo Co., Ltd.
Project : Building Automation in Dupont Photomask Pte Ltd.
Position Hold : Electrical and instrumentation Site Supervisor/
Technical.
Period : January in 2001 until April in 2001.
Job Involved : To supervise Sub-Contractor to do installation of
cable support system, instrument equipment, electrical
equipment, power and control cable laying, termination work and
complete with loop checks, testing and commissioning work, and complete
with protocol test report to maincon till project handover.
Name maincon : M+W Zander Pte Ltd, Singapore, German Center
Employer Name : Dragger South East Asia, Singapore.
Project : 1st Silicon Sdn Bhd, Sarawak Kuching.
Position Hold : Electrical and instrumentation Supervisor/
Technician.
Period : July in 1999 until December in 2000.
Job Involved : To supervise the entire plant erection and
installation work of gas detection system,
instrumentation equipment, cabling loop check, testing & commissioning,
supervise Sub- contractor on E&I installation work are in
conformance to design in the technical drawing and
to carry out all the FAT and LSS check till project handover.
Name Maincon : ABB Power Generation Sdn Bhd K.Lumpur.
Employer Name : Addeco Engineering Pte Ltd.
Project : Combined Heat Power Plant (CHPP) Mentakab, Pahang.
Position Hold : Electrical and Instrumentation Technical.
Period : April in 1998 until June in 1999.
Job Involved : To install electrical and instrument equipment
such as pressure transmitter, level switch, flow switch,
temperature and humidity sensor, etc, and to assist engineer level to do
testing and commissioning work.