Quality Assurance Control
Resume:
VERONICA V. BAILEY
BAILEY
**** ******* ***. ******** *******, CO 80923
****************@*****.***
WORKING EXPERIENCE
1. Boulder Scientific Company
3rd Street Mead, CO
September 16, 2013-Present
Quality Assurance Technician IV
• Responsible for determining sample protocols, sampling materials, non-conforming
reporting, failure investigation and analysis.
• Identify specification and approval issues and conduct analysis of specification approval
needs.
• Skilled in industrial scale chemical handling and sampling techniques.
• Administration of quality system and assist Quality Manager on documentation of system
and processes.
• Prepare sampling, analysis of Analytical services final report of raw materials,
intermediates and finished product in compliance with quality standards and requirements.
• Review and analyze operational reports to confirm data quality obligations are met and
accurately reflect the current state of all assets based on all activity conducted.
• Review and approved raw materials in Inventory and prepare Bill of Material prior
production run. Provide engineering and technical assistance to support Production, R & D,
Business Development and Pilot Plant operations.
• Review production batch records.
• Responsible for strict implementation of Statistical Process Control (SPC)
• Participation on Material Review Board and Corrective Action Investigation.
• Issue a Certificate of Analysis to certifies the quality and purity of chemical products
2. Thin Metal Parts
4733 Centennial Blvd.
Colorado Springs, CO 80919
September 13, 2011- September 11, 2013
Quality Assurance Technician
• Metal sheet products inspection and dimension check using Micro Vu Vertex and InSpec
Metrology Software of geometric dimensioning and tolerance, reporting, and data collection.
• Aside from using Micro Vu coordinate machine in checking parts I also use calipers,
micrometers, height gages, optical comparator, thickness gages, and other inspection devices for
inspections.
• Create and write programs to run metrology process and inspection using Inspect Metrology
Software.
• Interpret and advance understanding on mechanical drawings using Geometrical Dimensioning
and Tolerances GD&T standard AMSE Y14.5
• Perform 1st Article Inspection prior production run.
• Create and maintain QA files on parts and assembly drawing, procedures, quality deviations
reports and document on finish products.
• Create/draft production drawings using AutoCAD 2012 Rev 18.2 Release 26.
• Validates quality processes by establishing product specifications and quality attributes;
measuring production; documenting evidence; determining operational and performance qualification.
• Prepares quality documentation and reports by collecting, analyzing and summarizing
information and trends including failed processes, stability studies, recalls, corrective actions, and re-
validations.
• Performed audit on specification sheets, router, bill of material, Engineering Drawings, guidelines
and diagrams prior production run.
3. Prescott Inc.
18940 Emigrant Trail East
Monument, CO 80132
July 11, 2011- August 30, 2011
Inventory/Cost Analyst
Temporary position
• Prepared On hand Reports, Inventory Report, Job Cost and Profit Analysis Report.
• Prepare cost estimates reports for new products and product Physical inventory on finished
goods, work in process, production part and warehouse stock.
• Assist the company’s controller to reconcile perpetual raw material and work in process versus
General Ledger inventory balances.
• Assist the company’s controller to prepare Margin Analysis Report and ABC Analysis Report.
• Review and assisted in breaking down the Bill of Material into subassembly parts and routings
for accuracy and enter in the system.
• Compile cost data for preparation of annual budgets.
• Review purchase price variance accounts.
4. QCMI - Quality Concepts Manufacturing, Inc.
1635 South Murray Blvd.
Colorado Springs, CO 80916
July 13, 2010 – June 27, 2011
Quality Assurance Inspector
• Performed audit on specification sheets, router, bill of material, Engineering Drawings, IPC
design guidelines and diagrams prior production run.
• Create and maintain QA files on parts and assembly drawing, procedures, quality deviations
reports and document on finish products. Performed Protocol Analysis on Printed Circuit Boards.
• Performed in-process and Final Inspection on PCB and Cable based on IPC 620 and Jedec
Standard
• Validates quality processes by establishing product specifications and quality attributes;
measuring production; documenting evidence; determining operational and performance
qualification; writing and updating quality assurance procedures.
• Maintains and improves product quality by completing product, company, system, compliance,
and surveillance audits; investigating customer complaints; collaborating with other members of
management to develop new product and engineering designs, and manufacturing and training
methods
• Prepares quality documentation and reports by collecting, analyzing and summarizing
information and trends including failed processes, stability studies, recalls, corrective actions,
and re-validations.
5. Spectranetics Corporation
9965 Federal Dr, Colorado Springs, CO 80921
April 26, 2009 – June 15, 2010
Quality Assurance Inspector
• Ensure that all products and services are in compliance with all relevant standards and customer
requirements.
• Responsible for the inspection of incoming materials using measurement and test equipment and
established documentation to assure acceptable products.
• Review and release sterilization documents prior finished goods/ shipping.
• Read and interpret inspection plans and blueprints in order to identify discrepancies on catheters
and medical devices inspected.
• Inspect incoming purchased parts, materials, and electrical components when required.
• Verify inspection equipment is calibrated and current prior to each use. Ensure proper material
identification, segregation, and storage.
• Interface with personnel in Production and Engineering to communicate discrepancies.
• Generate Reject Notice on Agile software for discrepant material and forward to MRB for
disposition.
• Conduct in-process sampling and physical testing of medical devices with required paperwork
• Monitors areas for adherence and enforcement of Standard Operating Procedures (SOPs) and
Good Manufacturing Practices (cGMPs). Also, responsible for adhering to the SOPs and cGMPs
that are in effect assuring the quality and quantity of product produced. Responsibilities: •
Conduct pre start-up inspection, documentation check and release to run product in
manufacturing and/or packaging.
6. Aspen Technologies
5050 List Drive. Colorado Springs, CO 80919
August 7, 2006 – April 9, 2009
Production Operator III
• Performs high accuracy component placement and automatic die attach for a variety of
assembly applications, especially for precise automated assembly of high performance
components using a Palomar 3500 III
• Operate K&S 8060, ESEC 3200 and KnS 8028 for wire bonding.
• Performs wirebonding : Fine Pitch PBGA, Multi-Tiers bonds, Au Wedge Bonding in Multi-
Tiered PBGA, Stacked Die wirebonding, Al Wedge Bonding & Flip Chip - Photonic Device
7. Peak Contract Manufacturing Inc.
6113 Constitution Ave. Colorado Springs, CO 80922
February 14, 2005-July 30, 2006
Quality Assurance Inspector
• Performed audit on specification sheets, router, bill of material, Engineering Drawings,
IPC design guidelines and diagrams prior production run.
• Create and maintain QA files on parts and assembly drawing, procedures, quality
deviations reports and document on finish products. Performed Protocol Analysis on Printed
Circuit Boards.
• Performed in-process and set-up Inspection on SMT and PTH area.
Performed 1st article inspection on PCB.
•
• Performed in-process and Final Inspection on PCB and Cable based on IPC 610 and
Jedec Standard
• Validates quality processes by establishing product specifications and quality attributes;
measuring production; documenting evidence; determining operational and performance
qualification; writing and updating quality assurance procedures.
• Maintains and improves product quality by completing product, company, system,
compliance, and surveillance audits; investigating customer complaints; collaborating with other
members of management to develop new product and engineering designs, and manufacturing
and training methods.
• Prepares quality documentation and reports by collecting, analyzing and summarizing
information and trends including failed processes, stability studies, recalls, corrective actions,
and re-validations.
8. Orient Semiconductor Philippines Inc.
Science Park II, Calamba City, Laguna, Philippines 4025
September 16, 1998- September 10, 2004
Quality Assurance Inspector/Production Operator
• Collect, calculate and analyze data for the purpose of determine acceptance for receiving
inspection, in-process inspection, final product inspection and packaging inspection
• Responsible for strict implementation of Statistical Process Control (SPC)
• Prepare and distribute Control Chart to production/manufacturing.
• Incoming Quality Control of Wafer and Raw Material
• In-Process Reliability Monitor of Epoxy Thickness Monitor, Die Shear Test, Bond Pull
Test,Ball Shear Test, Bond Pad Cratering Monitor, X-RAY Monitor
• Quality Assurance Gate/In-Process Quality Control
• 2nd Optical, 3nd Optical, 4nd Optical Gate Inspection
• Performed wire bonding using ASM 1488 & KnS 8020
EDUCATION
AMA University
Laguna, Philippines
Bachelor of Science in Computer Engineering 2000-2004
Colorado Technical University
in Colorado Springs, CO 80923
Bachelor of Science in Business Administration, 2011-Present
Software:
MAX Exact MAX ERP Manufacturing Software
Oracle Application & Agile Application
Micro Vu Vertex and InSpec Metrology Software
LIMS (Laboratory Information Management System)
Lotus Notes and Outlook,
AutoCAD 2012 Rev 18.2 Release 26.
Microsoft Office (Word, Excel and Access)
QuickBooks Pro
Sage Business Works
MRP/ERP
RealTrac,
MS Accounting
OTHER RELEVANT SKILLS: QUALITY ASSURANCE/CONTROL SYSTEM, STATISTICAL PROCESS CONTROPROCESS CONTROL
RELEVANT SKILLS
METHODOLOGIES
ACCOUNTING, INVENTORY, COST ANALYSIS.
Contact this candidate