Quality Control Maintenance

Location:

Guayaquil, Guayas, Ecuador

Posted:

October 21, 2013

Contact this candidate

Resume:

RAUL A. COSTALES

RAUL

Calle Hungría *** y Rumania (Esq.), Quito-Ecuador

Cell. (0999) 848802

Phones: (593-2) 256-8641 (593-2) 224-4901

E-mail: ****************@*****.*** ************@*****.***

SUMMARY OF QUALIFICATIONS

A conscientious, organized problem solver. Results oriented, electrical mechanic with expertise in the aviation industry. Proven

track record in reaching Company goals by managing personnel, parts and time factors. Able to work under pressure. Disciplined

and eager to absorb new information.

AREAS OF STRENGTH

Management skills, strong leadership and experience in supervision with enthusiastic and assertive energy.

Listens actively and understanding of the message other team members deliver.

Studies in depth alternatives, searches all available resources and standardized positive achievements.

Solves common or critical problems with logic and analysis.

Reliable with mechanical, electrical and electronic measuring instruments.

Spanish and English fluently read, written and spoken.

PROFFESSIONAL EXPERIENCE

Apr/2010 – Present

Aeromaster Airways S.A., Quito, Ecuador

Aeromaster Present

Quito,

Quality Control Inspector

To assure that all Quality Control Activities are accomplished regarding Company policies and objectives to keep confidence

into the system and maintain the maximum level of airworthiness, legal and safety status, for the whole fleet; at Hangar Base,

into

Line, and Field Stations.

Base Maintenance Technician

Base

To accomplish Line Maintenance Tasks IAW applicable Technical Orders, Maintenance Program and Company MGM with

the proper Forms and corresponding tools and/or calibration equipment; and returning A/C’s fleet to service by verifying the

the

required Inspection.

required

Accomplishments

Keep the authority to determine the airworthiness for an A/C, engine or component for the Bell 212`s, Bell 206 B`s,

Sikorsky CH 54B fleet, and inspect a technician for proper A/C release on technical and legal forms.

Sikorsky

Complete knowledge of Technical Orders, as well RDAC s regulations Parts 1, 21, 39, 43, 45, 65, 133, 135 and 145.

Coordinate and verify a complete 600 Hrs. Inspection and non-routine tasks Check at UIO Bell approved Hangar on

Bell 212, HC-CHD helicopter.

Bell

Audit, organize and codify the NDT Shop, Hangar Facilities and Overhaul Shop at Uio Bell approved Station, by

developing QA policies on the QC Manual, with optimum use of human and technical resources.

developing

Audit Bloque 15, Bloque 10, Coca and Quito Bases IAW AMSA audit program; and follow up discrepancies

accomplishment

Perform Line Maintenance tasks on A/C HC-CHG, Sikorsky CH 54B with direct coordination with US Technical Team

on Bloque 15 oil field and maintain proper communication with respective channels on maintenance status.

Provide whole support in order to sign off any discrepancy opened in NRWC’s, FLB, and all Routine Inspection checks

IAW Bell Maintenance Program.

IAW

Dec/2009 – Apr/2010

COTAC/ISTAC, Quito, Ecuador

COTAC/ISTAC, Quito,

Aeronauthics Instructor

To instruct on Aeronautics Signature at students of COTAC (Civil Aviation Technical School); also teach Elective

Aeronautics Signature and teach Aeromodelism Signature for Aeromodelism Club.

Aeronautics

Accomplishments

Develop an Aeronauthics study program for students at COTAC School and its distribution electronically, accordingly

corresponding subject and group of class.

corresponding

Organizing aeromodelism club and corresponding instruction with the construction of balsa wood models.

Organizing

Acquisition of electric models such as Sky Fly II, Super Cub Cessna 172, Commanche RTF helicopter and P-51

Mustang, to develop practical flying skills on such models.

Mustang,

Oct/2007 – Oct/2009

AEROGAL Airlines S.A., Quito, Ecuador

AEROGAL Oct/2009

Quito,

Quality Control Inspector

To assure that all Quality Control Activities are accomplished regarding Company policies and objectives to keep confidence

into the system and maintain the maximum level of airworthiness, legal and safety status, for the whole fleet.

into

Base Maintenance Supervisor

To accomplish the supervisory of Hangar Maintenance Tasks IAW applicable Technical Orders, with the proper Forms and

corresponding tools and/or calibration equipment; and returning A/C’s fleet to service by verifying the required Inspection.

corresponding

Accomplishments

Keep the authority to determine the airworthiness for an A/C, engine or component for the B757-200, B737-300, B737-

200 and B727-200 fleet, or to remove a technician certification working with no approved practices.

Complete knowledge of Technical Orders, as well RDAC s regulations Parts 1, 21, 39, 43, 45, 65, 121 and 145.

Supervised a complete “C” Check at Aeroinversiones del Perú, an FAA 145 Repair Station on HC-CFO aircraft.

Organized the Aeronautical Receiving Department Parts, by developing QA policies on the GMM to keep Quarantine

parts to a minimum level, with better use of technical and legal documentation for material reception.

parts

Distribute maintenance tasks to Hangar Technicians by considering individual skills, knowledge and ratings.

Provide whole support in order to sign off any discrepancy opened in NRWC’s, FLB, CLB, “A” checks or similar.

Apr/2007 – Sep/2007

SAEREO Airlines S.A., Quito, Ecuador

SAEREO Quito,

Quality Control Inspector

Performed Quality Control inspections for a regional airliner under Part 121/135, which operates a fleet of 2 Embraer 120, 2

Performed

Beechcraft 1900 and Learjet 35A

Beechcraft

Accomplishments

Change of registration Lear 35A S/N 244 from N to HC, by doing the whole Certification Process Acc FAA and

Ecuadorian regulations, which includes legal and technical manuals bridging them to own documentation.

Ecuadorian

Improve ECTM program as well as its analysis for Pratt & Whitney engine s fleet.

Performed and extensive use of Embraer, Beechcraft and Lear AD’s, SB’s, SL’s, MM’s, IPC’s, OHM’s, SSM s, SRM s,

WDM s.

Worked on Planning Department to improve programs which applies to Lear 35A’s Certification.

Apr/2004 – Mar/2007

LAN CHILE/LAN ECUADOR, Quito, Ecuador

LAN pr/2004

Airframe & Powerplant Mechanic

Airframe

Transit and daily checks, A&P duties on B-767/300 s Pax and Cargo, A-320 s and A-319 s for LanChile, LanPeru,

Transit

LanEcuador and Mexicana.

LanEcuador

Accomplishments

Worked Etops Transit Service Check and Daily Checks (when needed) on B-767 s, and Transit Service Ch.on others.

Handled this routines on a timely and ordered manner according MM, FIM, TSM, MEL and DDG in compliance with

DGAC, FAA and Santiago de Chile s MOC based regulations; using top technology communication resources.

DGAC,

Performed and extensive use of Boeing and Airbus MM s, IPC s, OHM s, SL s, SSM s, SRM s, WDM s.

Trained on A-320 entertainment system Apax 130, and B-767 entertainment systems Apax 150, Overhead, DVD, Avod

Oct/2003 – Mar/2004

COMMERCIAL JET, Miami, Florida

Airframe & Powerplant Mechanic

Airframe

General Heavy maintenance, A&P duties on MIT’s B-707, Southeast MD-80’s, Air Santo Domingo’s B-757, Amerijet and

General

Cargo Jet B-727’s.

Cargo

Accomplishments

Performed Airframe and Powerplant “B” and “C” routine and non-routine checks on above aircrafts.

Developed ground handling operations on above aircrafts and all tests to release for airworthy conditions.

Handled proper paperwork for aircraft airworthy release to comply with FAA regulations.

Extensive use and compliance with AD’s, SB’s, Service Letters with proper knowledge of manufacturers Maintenance

Manuals, Overhaul Manuals, Illustrated Parts Catalogs, Wire Diagrams and Blue Prints.

Manuals,

BANNYAN AIR, Fort Lauderdale, Florida Jun/2003 – Sept/2003

Airframe & Powerplant Mechanic

Airframe

Scheduled and non-scheduled A&P duties on propeller powered aircrafts such as Cessna C-170, C-172, Skyhawk, C-185, C-

206, C-208, C-210, C-402, Partenavia Viator, Piper PA-31, PA-34, PA-46, Beechcraft B-55, B-58, Cirrus SR-20, SR-22.

Accomplishments

Performed 100 hour, annual inspections, routine and non-routine tasks for above named aircrafts.

Worked on single and twin engines such as Lycoming, Continental and PT-6 for turbo prop PA-46.

Pre and post-flight inspections which includes aircraft run-ups and corresponding mechanical troubleshooting.

COMMODORE AVIATION, Miami, Florida

COMMODORE Nov/2001 – May/2003

Airframe & Powerplant Mechanic

Airframe

General Heavy maintenance, A&P duties on C-130’s Israeli and Spanish Air Force B-707’s, ATI DC-8-60-70’s; “A” and “B”

routine checks for Gemini Cargo DC-10’s, Atlas Cargo B-747-200’s; flight line maintenance for Iberia B-767-200-300’s; and

occasional B-727’s and B-737’s.

Accomplishments

Performed Airframe and Powerplant “A”, “B”, “C” and “D” routine and non-routine checks on above aircrafts.

Conducted ground handling procedures on above aircrafts.

Worked IPC’s for DC-8’s, B-727’s and B-707’s at the IPC department as Parts Expediter.

S.M.A.R.T., Miami, Florida Sept/2001 – Oct/2001

Sept/2001

Airframe & Powerplant Mechanic

General heavy maintenance, A&P duties on DC-9’s Legend Air, Israeli and Spanish Air Force B-707’s, Global Express and

ATI Cargo DC-8’s; Gemini Cargo DC-10’s and Israeli Air Force C-130’s for Commodore Aviation.

Accomplishments

Performed Airframe and Powerplant “A”, “B” and “C” routine and non-routine checks on above aircrafts.

Conducted ground handling procedures on above named aircrafts.

P.D.S Technical Services, Miami, Florida Aug/2001 – Sept/2001

Aug/2001

Airframe & Powerplant Mechanic

General heavy maintenance Airframe and Powerplant duties on DHL B-727’s and Airtran Airways DC-9’s aircrafts for

Avborne Aviation.

Accomplishments

Performed Airframe and Powerplant “C” checks, non- routine items on DC-9’s Airtran Airways.

Conducted Airframe and Powerplant “C” checks, non-routine items on B-727-200’s for DHL aircrafts.

B.F.Goodrich Aerospace, Inc., Miami, Florida Mar/1999 – Aug/2001

Miami,

Wiring Mechanic

Manufacturer, repair, install and troubleshoot electrical wiring harnesses for B-727, 737, 747, 767, MD-80, DC-10 and MD-11

landing gears.

Accomplishments

Accomplished the assembly of electrical components on landing gears.

Manufactured wire harnesses in accordance with Boeing and Douglas companies specifications.

Organized the electrical material, parts and wire required for each new project.

Researched on Boeing specifications and FAA regulations for applicability and met I.S.O. standards.

TECHNICAL/COMPUTER

Aircraft Powerplant Mechanic Program. (Miami, Fl. – Apr/1998 – Jul/2001).

Aircraft Airframe Technician Program. (Miami, Fl. – Apr/1998 – Jul/2001).

Basic Electricity Course. (Miami, Fl. – Nov/1998).

Aircraft Composites Course. (Miami, Fl. – Dec/1999).

Sheetmetal Course. (Miami, Fl. – Aug/1999).

Turbine Engine Overhaul Course. (Miami, Fl. – Jul/2000).

Boeing 727-100/200 series Familiarization Course. (Avborne. Miami, Fl. – Sep/2001).

Boeing 737-700/800 series Familiarization Course. (Miami Tech Line Maintenance. Miami, Fl. – 2002).

Boeing 767-200/300 series Familiarization Course. (Pan Am Academy. Miami, Fl. – Jan/2003).

Gemini Air Cargo, GMM. (Miami, Fl. – Jul/2002).

Hazmat & MSDS, FAA Aviation Safety Program. (Nov/2003)

FAR Part 43, FAA Aviation Safety Program. (Jun/2000)

Aging Aircraft Wiring & Mntc. “Personal Minimums” Checklist, FAA Aviation Safety Program. (May/2000).

Introduction to Human Factors, FAA Aviation Safety Program. (Oct/2003).

Non Destructive Testing and Personal Minimums, FAA Aviation Safety Program. (Jul/2000).

Calibration Technics, FAA Aviation Safety Program. (Jan/2004).

Boeing 767-300 (E/A/P/Av), Level III ATA Spec. 104. (Santiago de Chile – Aug/2004).

Apax 130/150, AVOD B-767 Retrofit, Overhead B-767, Personal DVD B-767. (Oct/2004).

Airbus A319/320 (E/A/P/Av), Level III ATA Spec. 104. (Santiago de Chile – Dec/2005).

MasAir, GMM. (Jan/2005).

MasAir, RVSM. (Jan/2005).

Inducción RNP. (Lan, Quito – Jul/2006).

Boeing 767-300 Recurrent Line & Base, Absa Cargo. (Brazil – Apr/2006).

Embraer 120 (E/A/P/Av), Level III ATA Spec. 104. (Saereo, Quito – 2007).

Boeing 737-400 (E/A/P/Av), Level III ATA Spec. 104. (Aerogal, Quito – Oct/2007).

Inspección Visual, Nivel II, CENDE. (Quito – Nov/2007).

Inspector Recepción de Partes. (Aerogal, Quito – Nov/2007).

Boeing 737-300/400/500 (E/A/P/Av) Level III ATA Spec. 104. (Aerogal, Quito – Jul/2008).

Boeing 737-200 (E/A/P/Av) Level III ATA Spec. 104. (Aerogal, Quito – Apr/2008).

Evaluación e Interpretación Niveles de Corrosión. (Aerogal, Quito – May/2008).

Boeing 737-300, Engine CFM56-3B-2 Run-up. (Lima – Nov/2008).

Boeing 737-300, OJT. (Lima – Nov/2008).

Boeing 757-200 (E/A/P/Av) Level III ATA Specs (Quito – Sep/2009).

Inspector Control de Calidad, (Quito – 2007).

Bell 212 – Helicopter Initial Field Maintenance Course. (Aeromaster Airways, Quito – Jul/2010).

Sikorsky CH 54B – Helicopter Initial Field Maintenance Course. (Aeromaster Airways, Quito – Oct/2010).

Computer literate knowledge in Word, Excel, PowerPoint, Access.

EDUCATION

MDC-College, Business Supervision & Management. (Miami, Fl. – Oct/2001 - Jul/2003).

George T. Baker Aviation School, Airframe & Powerplant Program. (Miami, Fl., – Apr/1998 - Jul/2001).

Military School, Quito, Ecuador, 1st Lt. Engineering. (Quito, Ecuador – Aug/1983 - Aug/1986)

ADDITIONAL EDUCATION/TRAINING

Airframe and Powerplant License (FAA 593355355). (Aug/2001).

Airframe and Powerplant License (Ecuadorean MM 2190). (Dec/2003).

Computer Assembly. (English Center, Miami).

CPR License (Miami-Dade Community College). (Miami, May/2003).

First Aid License (Miami-Dade Community College). (Miami, May/2003).

Safety & Human Factors in Aviation Maintenance. (Miami, Nov/2003).

Airfield Operations Area Driver Training Program. (Miami, Jan/2004).

Human Factors. (Lan, Quito – Jun/2006).

Industrial Safety and Risks Evaluation. (Lan, Quito – Apr/2006).

Push Back & Towing. (Lan, Quito – Jan/2006).

Spills and Fauna Control at the AIMS. (Aerogal, Quito – Nov/2007).

Non-domestic Residual Management. (Aerogal, Quito – Nov/2007).

Emergency Procedures. (Formatec, Quito – Nov/2007).

Basic First Aids. (Emergency Medical Services, Quito – Nov/2007).

Fire Extinguishers handling. (ADC & HAS Mgmt., Quito – Jan/2008).

Entrepreneurship Fundaments. (CONQUITO Municipal Agency, Quito – Nov/2009).

Entrepreneurship Procedures. (CONQUITO Municipal Agency, Quito – Dec/2009).

Productive Touristic Business. (Tourism Ministry, Quito – Jan/2010).

Quality Control Management. (Tourism Ministry, Quito – Feb/2010).

Gestión por Procesos y Mejora Continua. (SGS, Quito – Feb/2010).

Indicadores de Gestión y Balance Scorecard. (SGS, Quito – Feb/2010).

Autodiagnóstico de la Calidad en la Empresa. (SGS, Quito – Feb/2010).

Gestión de la Calidad para PYMES. (SGS, Quito – Feb/2010).

Cabin Resource Management – CRM. (Aeromaster Airways, Quito – May/2010).

Emergencies, Evacs and First Aids. (Aeromaster Airways, Quito – Jun/2010).

ASSOCIATIONS/DISTINGUISHMENTS

PAMA – Professional Aviation Maintenance Association.

NV-THS – National Vocational Technical Honor Society. (G. T. Baker Aviation School – Mar/2000)

MDC-College – Academic Excellence Award. (Fall Term 2002-1).

RUBY AWARD – Certificate o Training by US Federal Aviation Administration. (Mar/2002).

DIAMOND AWARD – Certificate o Training by US Federal Aviation Administration. (Dec/2003).

Contact this candidate