BE-Degree Mechanical Engineer-HVAC with 4 years experience

CURRICULAM- VITAE

NIZAR MOHAMED.K.S

***/***,

Main Bazaar, Kadayanallur,

Tirunelveli-DT,

Tamilnadu, India-627751

Email-

*****.*********@*****.***

*************@*****.**.**

Mobile No : +974-********

(Qatar)

: +91-944******* (India)

Land line : +91-463*******

Professional Qualification: BE Degree-

Mechanical Engineering

CAREER OBJECTIVE

Seeking a challenging career in the quality environment where my technical

skills and qualifications as a Mechanical Engineer can be shared and

enriched and also make a significant contribution to organization with

strong work ethics and diligence.

CAREER BRIEF

Total 3 years and 9 Months Experience in Middle East (3 Years and 3

Months) and in India (6 Months) in Design, Installation and Estimation

of following services.

HVAC (Heating, Ventilation and Air Conditioning):-

Experienced in Package Unit, Kitchen Hood, Central Plant,

District Cooling and split Air conditioning like Heat Load Estimation (HAP-

CARRIER), Equipment selection (TOPSS), Duct Design & Sizing (ASHRAE, UMC,

BS, SMACNA, DW 144/142/141/171 etc), CHW Pipe Design & Sizing (BS, ASHRAE),

ESP Calculation, Pump Head Calculation, Workshop Drawing & Material

Submittal preparation, Materials & Fittings take off and Execution of

Installation, Testing & Commissioning of Air Handling Unit with Heat

Recovery Wheel, Fan Coil Units, Ventilation Fans, Air washers, Air

Curtains, Package Unit, Chillers, CHW Pumps, Heat Exchangers,

Pressurization Units, Chemical Dosing System, BMS Control and Control

Valves etc.

Plumbing (Water Supply, Drainage and Storm water):-

Workshop Drawing and material submittal Preparation, Pump Head

calculations, Pump water Heater and sanitary items selection, loading Unit

Calculations & Pipe Sizing, Materials, Fittings and Valves quantity take

off and Execution of Installation, Testing and Commissioning of Water

supply Pipeline, Drainage Pipe Line, Storm Water Pipeline, Water Tank,

Water Heater, Booster Pump, Transfer Pump, Sump Pump and controls etc.

Fire Fighting (Sprinkler System, Hose reel and Clean Foam System):-

Workshop Drawing Preparation, Pump Head calculation, Materials,

Fittings and Valves quantity take off, Execution of Installation, Testing

and Commissioning of GI Pipeline, Sprinkler, Hose reel, Dry Risers, Wet

Risers, Foam System, Halogenated Extinguishing Agent Systems and Fire

Pumps ( Diesel Pump, Jockey Pump and Electric motor Pump) as per Civil

Defense Regulations and standard norms etc.

TRAINING

Completed one year training course through online in

Design, Erection, Maintenance & Estimation of Air Conditioning and

Ventilation with TECNOLCO institute of HVAC Nampally, Hyderabad-India.

TRAINING CONTENTS

E-20 Form, ASHRAE / SMACNA Standards, Window A/C, Split A/C.

(Ductable / Non-Ductable), Package A/C, Duct Designing (for Residential

Complex and Villas), Ventilation, Chiller Design

Plumbing / Fire Fighting, Tendering, Estimation & B.O.Q.

PROJECT WORK

. Designed project work of HVAC for Ground + 10 Typical Floors

Residential Building

during Training of HVAC Design.

. Design & Drawing of all types of Split A/C and preparation of Duct

layout with Supply & Return Diffusers, Duct Grill, Slot Diffusers with

flexible connections for G+10 Typical Floors Residential Building.

. Cooling Load calculation by manual method with E-20 Form, CFM

calculation & Air

Distribution to various branches of duct,

. Duct Size Calculation by Duct Sizing method / Equal Friction

Method, Calculation of No. of

G.I. Sheet & Gauge required, Selection of SAD / RAD (2-way, 3-

way, 4-way), SAG/RAG,

Slot Diffuser etc.

. Selection of FCU with reference to TR required in

particular Rooms/Halls.

. Static Pressure Calculation for Selection AHU.

. GPM calculations and Distribution of Chilled water to various

FCU & AHU through chilled

Water Supply & Return Pipe.

. Calculation of Chilled Water Supply & Return Pipe Diameter &

Pipe friction losses through

Standard Friction Chart for Closed Piping Systems.

. Selection of Chillers through Catalog of CARRIER & TRANE on the basis

of TR capacity required for completed G+10 floors, and Leaving Chilled

water Temp. & condenser Entering Air Temp. Also selection of Physical

& Performance Data through Catalog. Also selection of Stand by Chiller

based on TR for future purpose.

. Pump Head Calculations for the selection of chiller pumps by

considering complete chilled water supply & return pipe length and all

the fitting equivalent length (Bend, Tees, Reducer, DRV, NRV,

Strainer, F.C, I.V etc.), also selection of stand by pumps.

. Preparation of Roof Floor Plans for the location of Chillers, Chiller

Pumps, Pumps standard connections, chilled water supply & return

header pipes, Dosing Tank, Expansion Tank, Automatic Air Vent, the

location of Exhaust fan and Fresh Air Handling Unit etc.

. Preparation of Riser Diagrams showing location of all the equipments

with details.

. Preparation of FCU schedule, No. of LH/RH FCU required with TR,

Preparation of Bill of Quantity/Material(B.O.Q.)

EXPERIENCE PROFILE

* Well experienced in HVAC Design and Installation making technical

submittal in compilation with tender and specification.

* Execution of Ducting, Piping, installation and commissioning of

centralized air conditioning plants (Chillers), Splits and Package

A/C units.

* Co-ordination with clients, Architects, Consulting Interiors and

other contractors to take the accountability of customer

satisfaction.

* Maintaining Stores, Stocks, Inventory and Delivery of equipments as

per requirement.

* Co-ordination with client Engineers, Consultants for the approval of

A/C drawings and getting the work done at site through site

supervisors.

* Highly experienced in resolving problems independently on my own and

quick decision maker to solve as per the requirement and standard

industrial practices.

* Co-ordination with suppliers to ensure correct and timely delivery of

materials.

* Knowledge in Planning-Preparing OBS/WBS by using Primavera 6.0

* Knowledge in Testing and Commissioning of all Mechanical equipments

like AHU's,FCU's,HRU's,Jet Fans,Smoke Extract Fans and all

ventilating fans.Basic commissioning knowledge of Fire Pumps,Transfer

and Booster Pumps.

* TAB System-Air Balancing and Water Balancing as per CIBSE and BSRIA

standards.

DUTIES AND RESPONSIBILITIES

> Cooling Load Calculations : Building Survey following CARRIER &

ASHRAE codes,

Calculations by manual method & latest HVAC software.

> Window & Split Air Conditioners : Description of refrigeration

cycle component, Assembly and installation of window A/C, Split A/C,

types of Split A/C (Wall Mounted, Ceiling Suspended, Cassette type,

Floor Mounted, Corner type, Ductable Split A/C), Installation

Techniques of Split A/C, Preparation of Drawing with all standards.

> Ducting : Calculation of Blower CFM, Air Distribution, Duct

Design, following SMACNA & DW142 Codes, Selection of Diffusers, Duct

Grills, Slot, Calculation of no. of G.I. Sheets required, Gauges of

G.I. Sheets, all other Standard duct connections, Selection of AHU

after Static Pressure Calculation, Preparation and Drafting of Duct

Drawings, Pre-commissioning and Commissioning of Duct, Utilization

of CAD in Duct Designing with completed details and description.

> Ventilations : Completed Design and selection of Extract-fans,

Centrifugal Blowers, Axial flow fans, Duct in-line fans, Fresh AHU

etc. Preparation of Riser Diagrams, Installation & Commissioning of

ventilation system for Toilets, Kitchens, Bathrooms, Basements, Pump

Rooms, Corridors etc.

> Chilled Water Systems (Central Plants) : Selection of Fan Coil

Units, Air Handling Units, Chillers, and Chilled water pumps with

pump head calculations, Chilled water piping designs with complete

valves & fittings, standard connections of FCU, AHU, Pumps &

Chillers. Preparation of

Riser Diagram for Multi Story, High Rise Buildings. Preparation of

B.O Q. Pre-commissioning and commissioning of Chilled water systems.

> Estimation, Tendering & Material Submittals : Preparation of

B.O.Q. by referring consultant specifications, materials take off

etc. Preparation of material submittal for the consultant approval

with drawings and samples.

> Plumbing : Preparation of Cold & Hot water services, Sanitary &

Drainage with complete standards and drawings.

EMPLOYMENT DETAILS

MIDDLE EAST

. Organization : M/s Trans Gulf International, LLC,

Doha-Qatar.

. Experience : 2012 Feb-Till Date

. Designation : Mechanical Engineer

. Organization : M/s Gulf Lifa Company (GRC Group) WLL,

Doha-Qatar.

. Experience : 2011 July-2011 December

. Designation : HVAC Engineer

. Organization : M/s Prime Projects International

(Construction) LLC, Dubai, UAE.

. Client : US Army Corps of Engineers.

. Experience : 2009 Nov-2011 January

. Designation : HVAC Trainee Engineer

INDIA

. Organization : M/s SS Comfort Systems (P) Ltd (CARRIER),

Hyderabad.

. Experience : 2009 May-2009 November

. Designation : HVAC Trainee Engineer

EDUCATIONAL QUALIFICATIONS

COURSE INSTITUTION UNIVERSITY/ MONTH&YEAR

BOARD OF PASSING

BE

(MECHANICAL National Engineering Anna University, April 2009

ENGINEERING) College, Kovilpatti. Chennai.

REGULAR

DIPLOMA IN

OSHAS

(CONSTRUCTION Indian Institute For HSE, June 2006

and INDUSTRIAL Prevention Of Hazard New Delhi

SAFETY) For Safety,

DISTANCE Pudukkottai.

EDUCATION

Hindu Nadar Hr sec

HSC school, Puliangudi. State Board March 2005

COMPUTER SKILLS

. Technical Packages : AutoCAD (2D), CATIA (3D), ANSYS, HAP

(CARRIER EII) HVAC

Design.

. Application Packages : MS Office (esp.WORD,EXCEL,OUTLOOK

EXPRESS AND POWER POINT)

. Platform : Windows 7( XP)

CO-CURRICULAR ACTIVITIES

> Presented a paper entitled 'NANO TECHNOLOGY' in the national level

technical symposium, MECHADROIT 08' held at JAYA Engineering College,

Chennai.

> Underwent industrial visit at SPIC and TAG industries (Tuticorin)

> Underwent industrial visit at RELIANCE PETRO CHEMICALS (Cochin)

PROJECT DETAILS

. Design and fabrication of Air Source Heat Pump Test Rig.

. Design and fabrication of Crushing machine using toggle mechanism.

EXTRA-CURRICULAR ACTIVITIES

> Active member in MECHANICAL ENGINEERING ASSOCIATION.

> Active member in Junior Jaycee. .

> Life Member in HSE PROFESSIONAL ASSOCIATION OF INDIA, New Delhi.

> Having Appreciation certificate from US ARMY CORPS OF ENGINEERS,

AFGHANISTAN ENGINEERING DISTRICT for HVAC and for leading the team in

safe work environment.

> Having Proficiency Certificate from CARRIER CHILLER SOLUTION.

PROFESSIONAL PROFILE

Name : Nizar Mohamed.K.S

Date of Birth : 10-04-1988

Marital Status : Bachelor

Sex : Male

PASSPORT DETAILS

Passport Number : H3308282

Country Code : IND

Place of Issue : Madurai

Valid Date : 26-02-2009 to 25-02-2019

LANGUAGE SKILLS:

. Read : English, Tamil, Hindi, Arabic and Urdu.

. Write : English, Tamil, Hindi and Arabic.

. Speak : English, Tamil, Urdu, Malayalam and

Hindi.

DRIVING LICENCE DETAILS

INDIA

License Number : TN69z20070004210 (Both Two wheeler, MWG and

Four Wheeler, LMV)

Valid Date : 31-12-2007 to 30-12-2027

QATAR

License Number : 288********

Valid Date : 06-12-2012 to 05-12-2017

DECLARATION:

I hereby declare that all the details given above are true

to the best of my knowledge and I assure that I will work in the right

earnest.

DATE :

PLACE:

(Nizar Mohamed.K.S)

Contact this candidate