Project Construction

Mohammad Rustam

Current Location : India

Total Experience : 16 Years 6 Month Petrochemical and Oil & Gas 13 Years

S/o: Muhammad Abdul Malick

Contact No: +91-917******* / +91-954*******

E-mail: acabi6@r.postjobfree.com

Objective

I need to get attached to an organization, which guarantees me the potential for significant professional, career growth and ensures commercial success. Apart from that a friendly & conducive workplace environment would be appreciable.

Academic Qualification

• 3 Years Diploma Engineering in Instrumentation Technology.

Profile

• Regular surveillance/inspection of construction activities as per project inspection and test plan.

• Assign and monitor respective duties of other QA/QC inspector

• Store and maintain all quality records.

• Coordinate with construction personnel about on going inspection issues.

• Regular reporting to QA/QC Engineer & Manager, on any major issues which require immediate action.

• Ensure proper implementation of ISO 9001.

• QC inspection for instrumentation/electrical system as per quality control procedure, instrument test plan and project specification.

• Inspection of cable trays, conduit, instrument, marshalling cabinet, interface cabinet, control desk and low voltage distribution system.

• Ensuring all instrument were installed& tested as per project quality procedure and project specification and prepare ITP forms (Instrumentation Installation Inspection).

• Prepare RFI (Report for Inspection) to client for joint inspection of completed work

• All activities during the construction & commissioning of control cable megering and measuring earth resistance test.

• Ensuring all instrumentation were installed and tested as per project quality procedure and project specification and preparation of ITP forms for instrument installation inspection.

• Prepare non-conformance with the customer’s representative to ensure good quality.

• Mechanical completion acceptance from construction and responsible for recording and clearing all instrumentation punch list and documentation.

• Ensure that inspection are performed in a timely manner and recorded as per specification and standard detail drawing ITP’s and QCP’s Witness of fire and gas loop checking, process loop check, instrument loop wiring continuity, instrument loop folder release forms. Issuing material discrepancy reports for any deficiency.

• Issuing non-conformance report (NCR) for the discrepancies of works .

• Inform client representative by the official application of inspection and arrange the joint inspection according to relevant ITP. Receive the construction RFI and determine construction works status i,e check installation conformity to project specification. Preparing the punch list items in advance of the PMCC (Partial Mechanical Completion).

Work Experience

United Arab Emirates Feb 2013 to Jun 2013

Company : Petrofac –GS JV

Project : N G L 4 –project (Ruwais)

Position : QA /QC Inspector--Inst

Coordinate with various disciplines for any deviations/site issues and contribute to resolving suchissues. Ensure the quality system has been effectively followed & implemented at all stages of construction phases.

• Witness the calibration of test equipments used in the calibration shop and verify the validity of the calibration of the test & measuring equipment as per ISO 9001:2000 standards.

• Review ITP'S, QCP'S and Engineering Drawings. Coordinates the compilation of quality control records approved as required by the Third Party Supervision and relevant authorities and as specified in the Project documentation.

United Arab Emirates March 2012 TO Jan 2013

Company : Petrofac

Project : A .F.F.D –Project Asab (U.A.E)

Position : QA /QC Inspector--Instrumentation

Responsibilities

In this project, as a QA/QC inspector Check all the instrument work is complying with the customer’s specification.

Responsible for conducting instruments inspection and coordinate with the client representatives for approval.

Making sure that all panels were designed as per the relevant IEC standards as applicable indoor and outdoor services. Ensure that all materials to be used as per customer’s specification and standards.

Responsible for quality checking after erection and commissioning of machines.

Monitor of on-going construction works versus the design and plan for instrumentation with system designed specifications.

with the client. Controlled a team of inspectors and maintaining all the R.F.I. for each and every activities

of instrument and telecom separately. The entire test reports, Technical queries, As-Built drawings, QC Dossiers,

WINPCS, PCOS and all related documents for final Handover to the clients are maintained as per the approved

construction quality plan. Attending daily and weekly minutes of meetings with client

Kingdom Of SaudiArabia March 2010 To 17-Aug 2011

Company : Daelim Saudi Arabia Co. K.S.A

Project : Saudi Kayan HDPE Project, K.S.A

Position: QC Inspector - Instrumentation

Daelim is ISO 9001 certified company in the kingdom of Saudi Arabia since 1973. in oil & gas, refining, chemicals, petro-chemicals and power generation sectors throughout the kingdom to its clients including SAUDI ARAMCO, SAUDI ELECTRICCOMPANY, SABIC, Royal Commission, SATROP and numerous privately funded enterprises.

EPC (Engineering, Procurement & Construction) project for the auxiliary utilities package of the new grass root Saudi Kayan HDPE Project being built by Sabic at the Jubail Industrial City 1.

Job Responsibilities:

Review drawings and documents and assure that all documents and drawings comply with SABIC Engineering standards and specifications.

Review MR packages to assure the implementation of SABIC Engineering Standards and specifications.

An integral part in the development, review and analysis of different aspects of design.

Job role that of a consultant to the design team in the implementation of all the quality requirements during the project engineering phase.

Preparation of the Engineering Quality plan as per the requirements of Saudi Kayan petrochemical complex.

Perform close monitoring and review of all the drawings and instruct the design team to make proper changes in the drawings which are not complying with the SABIC standards.

Ensure that proper documentation is maintained. Shall have to monitor the document controller in the documentation activities and conduct internal audits on a time to time basis in order to ensure that all documentation requirements of the design phase are adhered to. Compliance with corporate quality management system.

Conduct Material receiving of all the Material related to E & I and Telecom according to SABIC standers.

Review the Documents DuringMaterial Receiving Inspection.

Pre-Cast and Cast-in-Place Duct bank Fabrication and Mandrel Test.

OTDR(optical time domain reflectometer)Testing.

Insulation Resistance Testing (Maggering) of Instruments and Control cables on reel and after Laying.

Close Monitoring of Construction activities According to SABIC Engineering Standards and specifications.

United Arab Emirates Dec 2008 to Dec 2009

Company : N.P.C.C (U.A.E)

Project : Qatar Mass Project (Abu-Dhabi)

Position: QA/QC Inspector Instrumentation

Job Responsibilities:

- Review plans and drawings in accordance with specifications, codes and standards and raise TQ (Technical Query) if any change is required.

- Ensure All Instrumentation Activities aredone according to SAES (Saudi Aramco Engineering standards) or other International Instrumentation standards such asNFPA 70/NEC, NEMA 250, NEMA VE 1, NEMA VE 2,NEMA ICS 6, UL94, IEC 60529, IEEE 518, IEEE 1100, ANSI MC 96.1, ISO 9000,IS0 9001,ISO 9002

- Raise RFI’s (Request for Inspection) on completion of an activity according to Aramco standards.

- Surveillance visits to the vendors where equipmentis being manufactured.

- Issue NCR if there is any non-compliance.

- Review MTC’s as if they comply with Saudi Aramco standards.

- Conduct Megger Testing of cables upon receiving and before termination.

- Receive Material From store for the project and assure it has undergone the Mill Test Certification.

- Calibrate and configure different field devices like switches, thermocouple, RTD, Flow meters, level transmitters and pressure transmitters.

- Testing and Installation Inspection of Fiber Optics Cable.

- To ensure best practices for continuous improvement in construction activities.

- Making possible to implement best practices of ISO-9000.

- To participate and present weekly activities in internal meeting with construction team.

- To conduct all material receiving inspection for ensuring the compliance of Aramco standards

- To conduct inspections during ongoing construction activities for strict compliance of Aramco standards.

- To issue NCRs in case of violation and making sure for rectification of violence.

- Close coordination with construction team to implement quality standards right from beginning of activities for elimination of chances of error to reduce downtime because of holding of activities.

- Co-ordinate with client inspector for final inspection for holds and witness points.

- Inspection for Storage and Handling of Materials on Daily Basis.

- Conduct inspection properly in the installation of main equipment’s Programmable Logic Controller (PLC),

- Marshalling Boxes (MB), Marshalling Cabinets (MC), Motor Control Center (MCC), Switch Gear (SG), Local Control Panels (LCP), Uninterrupted Power Supply (UPS), Emergency Shutdown (ESD), and Digital Control System (DCS).

- Preparing the punch list items in advance of the PMCC (Partial Mechanical Completion).

- Preparing the pre-commissioning and commissioning package as per client’s company, national and international standards. Hand over the pre-commissioning and commissioning package to respected QA, QC manager.

Sultanat of QATAR March 2007 to Sep 2008

Company : Dodsal Engineering & Construction Co.Ltd.

Project : RGXII Project, Qatar

Position: QC Inspector – Instrumentation

Job Responsibilities:

• Responsible for quality checking and commissioning of various PLC based machinery.

• Check all the instrument work is complying with the customer’s specification.

• Responsible for conducting instruments inspection and coordinate with the client representatives for approval.

• Making sure that all panels were designed as per the relevant IEC standards as applicable indoor and outdoor services. Ensure that all materials to be used as per customer’s specification and standards.

• Responsible for quality checking after erection and commissioning of machines.

• Monitor of on-going construction works versus the design and plan for instrumentation with system designed specifications.

• Responsible along with the QC Supervisor for conducting the inspection, installation and calibration task as per customer order or request.

• Check the controls unit’s installation and calibrations as per the drawing standards and recommendations.

• Review designs related to instrument and provide suggestion for improvements.

• Perform calibration and system inspection for several customers plants involved in different businesses... e.g. Manufacturing, Power Stations, Pumping stations… etc.

• Installations of signal and control wirings and making sure it comply with the customer recommendation.

• Making sure that all panels were designed as per the relevant standards as applicable indoor and outdoor services

• Conduct studies to improve the customer E & I system for more user friendly available in the markets

• Conduct material receiving inspection to ensure that all materials and equipment’s received at the site are in compliance to the client/company standards and procedures.

• Responsible for conducting necessary reliability testing to check specification compliance of the product.

• Monitoring of on-going construction works versus the design and plan for instrumentation with consideration to the system design specifications.

• Check all materials used for the construction conforms to the client/company instrumentation requirements. This includes incoming of delivered materials along with product data.

• Initiate and ensure that the discrepancies are cleared or responded/rectified within the stated completion data to avoid further issuance of major complaints.

United Arab Emirates March 2003 to May 2006

Company : Descon Engineering & Construction Co.Ltd.

Project : Takreer Refinery Project (Ruwais U.A.E)

Position: QC Inspector – Instrumentation

Job Responsibilities:

• Performed Surveillance for ongoing construction activities.

• Carried out inspection of material to make sure it meets the requirement of project specification.

• Ensuring all instruments were installed and tested as per project quality procedures and project specification and instrument installation.

• Coordination with BGP in pressure testing of impulse lines and inspection and test plan.

• Assign and monitors respective duties of other QA/QC inspector.

• Store and maintain all quality records for client.

• Coordinate with construction personal about ongoing inspection issues.

• Ensure proper implementation of ISO 9001.

• Regular reporting to QA/QC Engineer & manager discussion with on any major issues which required immediate action.

• Conduct studies to improve the customer E & I system for more user friendly available in the markets

• Conduct material receiving inspection to ensure that all materials and equipment’s received at the site are in compliance to the client/company standards and procedures. Responsible for conducting necessary reliability testing to check specification compliance of the product.

• Monitoring of on-going construction works versus the design and plan for instrumentation with consideration to the system design specifications. Check all materials used for the construction conforms to the client/company instrumentation requirements. This includes incoming of delivered materials along with product data.

• Initiate and ensure that the discrepancies are cleared or responded/rectified within the stated completion data to avoid further issuance of major complaints.

• To ensure that all inspection and test records are properly documented and made available for handover to the client on completion of project in accordance with contract requirement.

Kingdom of Saudi Arabia Jun 2000 to May 2001

Company : S.A Kentz Co.Ltd. (K.S.A)

Project : Qatif Gas Plant Project (K.S.A)

Position: QA/QC Inspector – Instrumentation

Job Responsibilities:

• Ensuring all instrument works carried out comply with project quality documents and standards.

• Preparing punch list items, making surveillance of construction activities.

• Witness of instrument calibration.

• Installation of cable tray, conduit, junction boxes, instrument system.

• Coordination with client in pressure testing of impulse lines& Air Lines

• To ensure that all inspection and test records are properly documented and made available for handover to the client on completion of project in accordance with contract requirement.

• QC inspection for instrument system as per inspection and test plan, project specification.

• Inspection for Installation of cable trays, conduit, instrument, installation Continuity & Megger Test, Impulse line, Air Line and Loop Folder Inspection.

• Ensuring all instruments were installed & tested as per project quality procedure, project specification and preparation of ITP forms (Instrument Installation Inspection).

• Pre-loop inspection Inspection for all activities during the construction and commissioning of instrumentation.

United Arab Emirates March 1999 to Feb 2000

Company : Kharafi National Company. (U.A.E)

Project : P I C Project (Abu-Dhabi)

Position: QA/QC Inspector – Instrumentation

Job Responsibilities:

• Responsible for the calibration of all types of process instrumentation, installation, tubing (Pneumatic and process hookup), cable Tray,Instrument Installation Cable testing, laying, glanding and termination, function test, loop checking, instrumentation and system, fault finding and trouble shooting of process instrumentation during commissioning period.

• Final preparation of various drawings such as P&ID, Logic Drawing, Wiring diagram, Instrument loop diagrams.

• Responsible along with the QC Supervisor for conducting the inspection, installation and calibration task as per customer order or request.

• Check the controls unit’s installation and calibrations as per the drawing standards and recommendations.

• Review designs related to instrument and provide suggestion for improvements.

• Perform calibration and system inspection for several customers plants involved in different businesses... e.g. Manufacturing, Power Stations, Pumping stations… etc.

India March 1995 to Oct 1998

Company : Elmatics Engineering Pvt.Ltd

Project : R.P.C.L Hazira Project, Surat(India)

Position: QC Inspector – Instrumentation

Job Responsibilities:

• Ensuring all instrument were installed& tested as per project quality procedure and project specification and prepare ITP forms (Instrumentation Installation Inspection).

• Pre loop inspection

• Prepare RFI (Report for Inspection) to client for joint inspection of completed work

• All activities during the construction & commissioning of control cable megering and measuring earth resistance test.

• Ensuring all instrumentation were installed and tested as per project quality procedure and project specification and preparation of ITP forms for instrument installation inspection.

• Prepare non-conformance with the customer’s representative to ensure good quality.

• Mechanical completion acceptance from construction and responsible for recording and clearing all instrumentation punch list and documentation.

• Ensure that inspection are performed in a timely manner and recorded as per specification and standard detail drawing ITP’s and QCP’s

• Witness of fire and gas loop checking, process loop check, instrument loop wiring continuity, instrument loop folder release forms.

• Issuing material discrepancy reports for any deficiency.

• Issuing non-conformance report (NCR) for the discrepancies of works .

• Inform client representative by the official application of inspection and arrange the joint inspection according to relevant ITP.

Achievements

Receive APPROVAL for QC inspector from ADCO INSPECTION DEPATMENT

• Receive APPROVAL for QC inspector from SABIC WESTRAIN REGION INSPECTION DEPATMENT.

• Receive Certificate of Appreciation from RGXII Project QATAR,.

Personal Information

Name : - Mohd.Rustam

Fathers Name : - Mohd.Abdul Malick

Date of Birth : - 02/05/1974

Nationality : - Indian

Address : - At + Po: Adsar, Dist – Jamui, Bihar Pin-Code-811307

Language : - English, Hindi, Arabic

Marital status Married

Email : - acabi6@r.postjobfree.com

Cell No : - 0091,954-***-****/

Languages

English (Fluent),

Urdu& Hindi (Native)

Passport Details

Passport No : - J-7039819

Date of Issue : - 11-05-2011.

Date of Expire: - 10-05-2021

Place of Issue : Patna

Contact this candidate