Electrical Engineering

Max Moeini, P.Eng. Email: ***.******@*****.***

** ****** **., ******** ****, ON L4S 1W2 Tel: 604-***-****

Highlights:

10+ years of Experience in Management roles in Engineering, manufacturing, Operations, optimization, Maintenance and Field service, Planning, supervision of Engineering and Trade technicians teams in Field service installations, commissioning, Test, and site Start up .

Solid experience in Electrical and Mechanical product development, DFMA, product robustness, quality and Safety issues, and Continuous Improvement Programs supported by 20+ years experience in industrial manufacturing in Automotive, Military, Oil & Gas and Energy industries.

Registered as a Professional Engineer

Masters Degree in Electrical Engineering

Green Belt Six Sigma certification and years of experience in lean Manufacturing, continuous improvement process, monitoring and improvement of team efficiencies

Highly experienced in resource allocation, feasibility study, planning, budgeting, Production development, and Set and Meet project deadlines.

5+ Years in Health & Safety committee, HSE audit and experienced in work Hazard issues in industrial environment

Strong interpersonal skills, Initiative, Team player, problem-solver, flexible, organized, and detail oriented with Strong written and verbal communication skills.

Ability and willingness to travel up to 50%, Valid Driver's License and Canadian Passport

Skills:

Deep knowledge in Power electrical systems, Automation and control, PLC Programming, PLC and IPC based Control panels and HMI systems, Robot control systems, VFD and motor controls, and drives.

Solid Experiences in R&D, implementation, and test and debugging of analog and digital circuits, embedded firmware and software, C/C++ and Assembly Language programming and production development from prototype samples to mass production

Expert in Electrical hardware design with hands-on experience in Mechanical and electrical troubleshooting.

Good understanding in Electrical, Pneumatic, and Hydraulic machine elements, CEC and NEC code and CSA, UL, CE regulations.

Familiar with ISO-9001, ISO14001, DFMEA and DFMA concepts

10+ years membership of IEEE (Institute of Electrical and Electronics Engineers) with up to date knowledge in signal processing and Electronic circuits

Deep knowledge in schematic diagrams, Electrical and mechanical Drawings, CAD Design, and years of experience in office Computer programs, AutoCad), Programming languages and Computer Hardware

WORK EXPERIENCE:

Director of Engineering

Novarc Technologies Inc. Jan. 2018 – Present

Novarc is a small manufacturing company working on Welding Robot manufacturing, installation and commissioning in multiple industries.

Supervise Day to day operation of Engineering, Manufacturing, scheduling, purchasing, maintenance, technical support, Service, Test and installations

Planning, budgeting, control material flow, manufacturing efficiency, project management and lead time tracking,

Assign, and supervise Field Engineering support tasks for installation, Calibrations, commissioning, startups, certifications and all tasks at site, Support technical team at site with documents, equipment and resources.

Provide Safety trainings and updates, Run Health & Safety meeting, investigate at site and in house incident, inspections and provide reports

Field Engineering Manager - Manufacturing Operations Manager

Thomson Power Systems Mar. 2013 – Dec.2017

Thomson Power Systems is the Manufacturing facility as a part of large international company involved in design, Manufacturing and Installation of Low voltage and Medium Voltages switch Gear as backup power system controls for Oil Patches, Remote sites, Hospitals, Government buildings, Data centers, WWTP, mines, and military bases and any other application which requires reliable power systems. A group of 20 engineers are supporting the design and manufacturing process in an International ERP based system mostly in contact with North American based Installation support teams.

Day to day operation of a Manufacturing site in maintenance, Service, Test and installations

Supervise, direct and control of Technical support Trade Technicians in Test and installation and site start up SSU stages.

Provide Safety trainings and updates, Run Health & Safety meeting, investigate at site and in house incident, inspections and provide reports

Supervise customer support team to help customer by drawings, manuals, over the phone and at site support and trainings, instructions, Technical Bulletins and spec sheets.

Supervise and schedule Test Bay personnel with upcoming projects, priorities and resource planning.

Providing technical support to continuous improvement, engineering and R&D teams in implementing new designs, making prototype samples, and upgrading products.

Support QA departments with controlled document and technical support

Engineering Lead

IMW Industries Dec. 2011 – Feb 2013

IMW is the Manufacturing facility of a large international company involved in design, Manufacturing and Installation of Natural Gas Compressors (CNG Compressors). A group of 40 engineers are supporting the design and manufacturing process in an International ERP based system mostly in contact with US based Installation support teams.

Supervise, direct and control of electrical engineering teams in design, develop, packaging, test, certify and commissioning of CNG compressor systems.

Review, advise and approve engineering documents, drawings, instructions, Technical Bulletins and spec sheets.

Support production, assembly, Test Bay personnel with updated drawing and schematic, and providing technical advises.

Providing technical support to continuous improvement team in implementing new designs, making prototype samples, and upgrading products.

Reviewing Bill of Material (BOM), MCC panel and installation schedules, and confirm to fit with code and company standards.

Support quality departments with processing NCR, DCR, CAR and PAR(Correcting action required), and supporting third party inspector to certify product with ETL certification based on CEC and NEC code to satisfy CSA, UL and CE certifications.

Electrical Engineering supervisor

Mobile Climate Control Inc. May. 2007 – Dec. 2011

MCC is a large international company involved in air conditioning and climate control for Military, Off-road and also mass transit vehicles. Wiring harnesses control panels, and microcontroller based controller designed in electrical department along with system design and software based on different applications. A group of 50 engineers supporting whole design process in an International ERP based system.

Supervise, direct and control of electrical engineering group in design, develop, test, and implementation of automatic AC systems.

Review, advise and approve engineering documents, drawings, instructions, Technical Bulletins and spec sheets.

Design Electrical Control system for different type of Air Conditioning, Heating and Ventilation (HVAC) system

Design & prepare drawing for Wiring Harness, Schematic, Control Panel, Layout diagram, Test Harness or Test Box for different HVAC unit

Making & testing of sample harness for prototype unit and upgrade the drawing during pilot run production

Design and fabrication of Prototype HVAC units, test and verification of efficiency, air flow and durability in certified test chambers and Wind Tunnel with different air restrictions.

Preparing Bill of Material (BOM), create MCC part numbers for wiring harness, electrical components, Motors & Blowers and supporting documents, specification sheets and MAPs.

Create Engineering change request (ECR), verification of modified drawing as per ECR, testing and trouble shooting of HVAC units

Electrical Engineer, Maintenance Supervisor

ABC Group Inc. Apr. 2002 – Nov. 2006

This Company is a medium-sized private company involved in Automotive Industry working as a General Motors part supplier. Working area is a human-robot assembly line with lots of pneumatic and hydraulic sensors and actuators. All control panels are PLC based by a device network with facility of monitoring and control from every point of network.

Maintain building facilities, Boiler, HVAC, Paint Shop, Alarm & Security systems, and Power and network system

Supervised maintenance department & trades technicians in day to day operation

Modified Image processing methods in automatic Inspection system

Modified Automatic inspection system for moving parts

Optimized Periodic maintenance routines (P.M. Jobs).

Modified electrical and mechanical tools and systems.

Improved quality and speed of PLC/Robot controlled production line(Fanuc Robots R-J2 & R-J3 Programming, operation and teaching)

Engineering Lead – Project Manager

Sepehran Lift Co. May. 1997 – Jan. 2002

This Company is a small-sized private company involved control panel design for high speed Elevators and some services like: maintenance, trouble shooting, installation electrical and mechanical parts, instrumentation, calibration and safety regulations, with averaging $20 Million CAD projects per year.

Designed and implemented control panel for high speed elevators.

Supervised maintenance department with scheduled maintenance routines.

Optimized installation process for elevators

Managed 20 projects per year, coordinated five (5) teams of Three(3) members

Allocated resources of material and workforce for each project.

Optimized time and power consumption in AC drives parameters.

Education / Training:

Masters in Electrical Engineering (Feb. 1992-Jul. 1995)

SHARIF University of Technology Evaluated by University of Toronto

B Sc. in Electrical Engineering (Oct. 1984-Jul. 1989)

SHARIF University of Technology Evaluated by University of Toronto

Hazardous locations classification and regulations (Apr. 2012 )

ENGWorks Inc.

Advance Robot Programming, (Jan. 2005 )

Motoman Robots (Taskawa Motoman Robotic Controls)

Advance PLC Programming, (Jun. 2000 )

George Brown College, Toronto (AB PLC’s, Principles and Programming)

PLC Programming, (Jun. 2000 )

FESTO Pneumatics Inc. (Siemens Sematic S-5, Principles and Programming)

Pneumatic Systems, (Oct. 1999 )

FESTO Pneumatics Inc. ( Principles and Applications )

References available upon request

Contact this candidate