Engineer Safety
Resume:
POST FOR SAFETY ENGINEER
Kokou Fiacre Tekou
Safety Engineer,
MPW-National Security bureau - project
Mahboula block2, street 206, house 118
Contact: 50790727,
Email: *****.*****@*****.***
Career Objective:
A bright and enthusiastic MPW approved safety engineer who has +15 years’ experience in health and safety management, familiar with KOC & KNPC & MPW safety programs, safety codes and regulations. Commercial awareness and operational understanding of the risks and processes relating to maintaining a safe working environment, committed to the highest standard of health and safety, and is an expert at ensuring that risk is eliminated or minimized in the workplace. I focused and results driven professional, who can quickly establish confidence and rapport through an assertive and caring manner. Right now I am looking to work for HSE engineer position in your company that gives its employees unparalleled opportunities for personal development, responsibility and training.
Key Skills:
Effective communicator, ability to work under pressure, decision making, conflict resolution, leadership, self-motivation, teamwork & time management.
Extensive knowledge of control safety & health hazards related to engineering concepts.
Comprehensive knowledge of safety control technologies, equipment and devices
In-depth knowledge of physical and chemical hazards as well as toxicological implications on human health.
Sound knowledge of safety management and business systems.
Familiar with Environmental Regulatory Compliance and chemical plant processing equipment.
Strong management and multitasking skills.
Work Experience:
Khalid Ali Al Kharafi and Brothers Construction and Contracting Company. October 2017 - present,
SAFETY ENGINEER - MPW National Security Bureau Project.
Responsible for managing the company’s health, safety and environment compliance issues, and for delivering and maintaining a safe and secure working environment for all staff.
Duties;
Identifying hazardous conditions and practices in the workplace.
Leading a small cross-functional team to establish standards and ensure that potential hazards are identified, understood and controlled.
Reviewing and overseeing safety procedures.
Organizing in-house health & safety training for employees.
Carrying out site safety inspections.
Making changes to working practices.
Ensuring the safe installation of equipment.
Identifying probable risks.
Giving advice on safety matter to staffs and employees.
Ensuring that all safety activities are appropriately documented.
Promoting and developing a positive and proactive safety culture.
Providing training, assistance and mentoring to team members.
Giving high quality responses to regulatory queries.
Keeping abreast of Health & Safety legislation.
Responding quickly to any emergencies.
Advising on the purchase of safety equipment.
Writing up accident, injury and property damage reports.
Presenting information to project manager and ministry of public work groups.
Conducting weekly safety meeting to all staffs and employees.
Prepared safety plans, ensuring that applicable safety and health standards were implemented into such plans.
Mushrif trading and Contracting Company, September 2015 – August 2017 Health and Safety Engineer KOC New Flow line Project.
Handle tasks of identifying substandard conditions and root causes of safety and industrial hygiene problems.
Perform tasks of evaluating safety processes and provide recommendations in areas that need improvement.
Assigned responsibilities of identifying and solving basic safety issues.
Responsible for monitoring and tracking safety systems by physically visiting the work sites locations.
Handle tasks of circulating implementation strategies by communicating across business units.
Assigned responsibilities of developing recommendations and monitoring implementations of safety plans.
Prepare daily and weekly safety progress report.
Supporting staff with identification of environmental aspects and determining KOC objectives and target
Handle tasks of managing equipment and process related to environmental safety.
Responsible for monitoring and assigning tasks to suppliers in supporting safety initiatives of the company.
Responsible for the installation and preparing a report on mechanical equipment that all works are implemented at site conforms to KOC quality and safety requirements.
Hold weekly safety meetings with employees and supervisors with lessons learned from previous incidents and losses both at our facility and relative industries.
Perform daily safety management system audits, Job Hazard Analysis (JHA) reviews, and incident investigations while recommending corrective actions to management.
HOT Engineering Kuwait, August 2012 to September 2015.
Health and Safety Engineer GS & Sinopec projects. Construction for two water plants(MWDP1 & MWDP2)
Planned, organized, and led training in the following topics:
Risk & Hazard Communication, Personal Protective Equipment, Respiratory Protection, Hearing Conservation, Hazardous Waste Awareness, New Employee Orientation Safety Training.
Implement and supervise company safety policies and procedures.
Hold weekly safety meetings with employees and supervisors with lessons learned from previous incidents and losses both at our facility and relative industries.
Perform daily safety management system audits, Job Hazard Analysis (JHA) reviews, and incident investigations while recommending corrective actions to management.
Conduct monthly formal audits of entire facility and each work area within the shipyard.
Handle tasks of identifying substandard conditions and root causes of safety and industrial hygiene problems
Responsible for monitoring and assigning tasks to suppliers in supporting safety initiatives of the company
Perform tasks of evaluating safety processes and provide recommendations in areas that need improvement.
Assigned responsibilities of identifying and solving basic safety issues.
Responsible for monitoring and tracking safety systems by using computer systems and spreadsheets.
Handle tasks of circulating implementation strategies by communicating across business units.
Assigned responsibilities of developing recommendations and monitoring implementations of safety plans.
KGL Kuwait:
HSE Inspection supervisor,
Junior Health and Safety Engineer January 2007-August 2012
Develop organize, administer, and maintain the Company’s Environmental Health & Safety Program.
Head of safety over 7 contract companies.
In charge of new employee orientation and OSHA training.
In charge of various work permits submitted for site specific job task.
Held daily and weekly safety meetings.
Performed daily safety inspections, coordinated corrections and followed up to ensure corrective actions were taken.
In charge of accident investigations and preformed Incident reports.
Conducted root cause analyze for all reported Incidents.
Implemented all OSHA, EPA, Coast Guard rules and regulations.
Conducted daily audits on OSHA certified PPE.
Determined the nature of code violations and actions to be taken, and issued written notices of violation; participated in enforcement hearings as necessary.
Prepared, organized, and maintained inspection records.
Prepared written, oral, tabular, and graphic reports summarizing requirements and regulations, including enforcement and chain of custody documentation.
Monitored follow-up actions in cases where violations were found, and review compliance monitoring reports.
Verified that hazardous chemicals are handled, stored, and disposed of in accordance with regulations.
Supervises company owned vehicle policy compliance.
Ability to stop work at discretion regarding safety concerns.
GOUP COLAS - STTR TOGO:
Safety supervisor November 2003- September 2006
Junior Health and Safety Engineer-Road Lomé to Notsé
Identification of potential Hazardous area for critical inspection.
Job Safety Induction, Tool Box meeting.
General House Keeping
Campaign for using PPE related to the job
Checking work area before start of the work.
Respond to emergency safety issues
Checking of Lifting Tools, Tackles and Machines.
Checking Scaffolding and Excavation Safety Banking, Benching, Shoring and Fencing.
Safe work procedures job safety Analysis.
Checking unsafe acts and unsafe conditions.
Coordinating safety meeting.
Daily safety site inspection and giving solution through.
Fire safety responsibility, flammable substances and firefighting, fire Extinguishers inspection.
Responsible for all Electrical Safety, daily inspection of electrical cords, connections and electrical system.
Induction to new worker.
Coordinated with construction managers to identify and resolve various safety issues.
Confirmed that risk controls were implemented for all construction projects.
Verified that workers were properly outfitted with hardhats and safety vests.
Updated and implemented safety program procedures for each site.
Provided training on how to keep visitors to the site safe and how to develop an effective emergency evacuation plan.
Prepared required safety reports summarizing all on-site inspections.
Filled out required documentation following any on-site safety incidents or accidents.
Language knows:
English - Excellent
French - Excellent
Arabic - Good
Hindi - Good
Computer Skills:
Proficient with MS Word, Excel, and PowerPoint
Web and Social Skills
Graphic and Writing Skills.
Education and trainings:
Period Qualification Institution Attended:
August 2017 UB International studies
NEBOSH (National Examination Board in Occupational Safety and Health)
May 2017 Abwab institute Kuwait,
IOSH Managing Safety.
07April 2015 Green International Kuwait,
PRIMAVERA P6 (Planning and scheduling Tools & Techniques)
07 Sept 2013 High Studies Institute Kuwait,
Diplomas in Arabic speaking and writing,
March 2007 Abwab institute Kuwait
Industrial safety training First
20 July 2002 University of Togo
Bachelor degree in Engineering
References:
Will be provided upon request.
Contact this candidate