HARISH KUMAR Mobile: +91-810******* ~ E-Mail: ac9w6b@r.postjobfree.com

DEPUTY MANAGER WITH 12 YEARS OF EXPERIENCE IN:

● PROJECT MANAGEMENT ● EMBEDDED SOFTWARE DESIGN, DEVELOPMENT & TESTING ● PYTHON SCRIPTING

Highly energetic professional with 12 years of Experience in Project Management, Firmware Design, Development & Testing with good interpersonal communication and leadership skills. Supportive & enthusiastic team leader dedicated to streamlining processes and efficiently resolving project issues. CORE COMPETENCIES

Presently working with DENSO INTERNATIONAL INDIA PVT. LTD., Gurgaon as Deputy Manager.

Participated in 3 days Management Development Program for Executives conducted by Management Development Institute (MDI, Gurgaon).

Requirement gathering, Resource Planning, Project Scheduling, Proficient Communication and Team management in Engine ECU domain.

Onsite experiences of activities such as Design Review, specification fix and process improvement at Japan.

Experience in Embedded systems project development lifecycle. (Requirements analysis, Design, Development & Integration Testing of embedded applications in compliance with CMMI standards).

Experience in embedded software design & development in various domain like HVAC, BLDC.

ISTQB certified tester foundation level (ITB-CTFL-0071476).

Experience in Python Scripting for the various Audio amplifiers and Infotainment systems.

Experience in manual testing, Black box testing & GUI testing at various levels (Unit, Integration & System).

Worked as a Cell Lead for attaining ACE gold quality operating system, ACE was developed and is practiced by United Technologies Corporation (UTC).

CAREER GROWTH PATH

JULY’04 – JUNE’07

Bachelors of

Engineering

(Electronics &

Communication)

JULY’07 – APRIL’11

Research &

Development Engineer

(Micro Instruments co.)

APRIL’11 – JAN’16

Test Lead

(Larsen & Toubro TS)

FEB'16 – Till Now

Deputy Manager

(Denso International

India Pvt. Ltd.)

SKILLS SET

Micro Controllers: Intel 8051 based Microcontrollers, Microchip PIC Microcontrollers (16F series, 18F series) and RENESAS (R8C-Tiny and H8 series).

Programming Languages: Micro C, Assembly, Embedded-C, Python.

Development IDE: Eclipse, IAR Embedded Workbench, MPLAB, KEIL, CCS compiler studio, High Performance Embedded Workshop, DEV-C, Minicube Programmer & Debugger.

Communication Protocols: UART, RS232, CAN, MOST, I2C, SPI, and CCN & USB.

Driver Development: ADC, DAC, RTC, EEPROM, Stepper Motor and Relay.

Operating Systems: DOS, WINDOWS XP, WINDOWS 7, EmbOS

Software Tools: Microsoft Office, VSS, PVCS, SVN, DOORS, JIRA

Management Tool: MS Project.

ORGANIZATIONAL EXPERIENCE

Denso International India Pvt. Ltd.

Deputy Manager

Feb’16 – Till Now

Project Management

Coordinating with Customers to gather requirements & manage expectations.

Improving customer satisfaction by ensuring on-time and quality deliverables, resolving customer’s issues with team support at the earliest.

Planning & arranging resources as per the project requirements & sub-ordinate interest.

Providing & arranging training as & when required for team members.

Regular meetings with team to track progress of projects, resolving concerns/issues in ongoing activities, providing support/guidance when required.

Communicating with all Project Stakeholders to ensure all are working in same direction for meeting upcoming milestones.

Present status reports to Customer as well as Management on Monthly basis.

Improving/Implementing processes to resolve periodic issues so as to smoothen Project development.

Interaction with Vendors/Suppliers for discussion on requirements, Delivery schedule and reporting quality issues.

Coordinating with Sales for Development cost & Lead Time estimation.

Coordinating with Manufacturing plant Departments for on time & Quality delivery to customer.

Started involved In Annual Budget plan discussions with HOD. Larsen & Toubro Technology Services

Test Lead

April’11 – Jan’16

Bose Amplifier Software Validation

Tools Used: Tortoise-SVN, Eclipse, JIRA, DOORS, Pandora

Description: To develop the Python Test Scripts for various test cases, where each test case will verify various features of Amplifier software such as Bass, Treble, Volume and others.

Duration: 1 year and 4 Months.

Role: Team Leader

Responsibility: To develop the Python Test Scripts for various test cases, test the Developed Python scripts over ATP

(Automation Test Platform), observe findings for the tested scripts and report it to the developers, Commit the test scripts into Tortoise-SVN. To perform the Regression testing and validate the Amplifier software for new software releases and prepares the validation report

Display Development for Roof Top Unit (RTU)

Tools Used: Visual Studio 2010, Emwin (Graphic Library), Renesas E1 Emulator, RX63N series microcontroller and CCRX compiler

Description: The primary function of the overall UI is to provide and to accomplish rooftop control. UI Module provides a primary method for local users to access system information makes selections and provides inputs. The module contains a keypad with 6 buttons and 240 x 64 pixels graphic LCD display.

Duration: 6 Months.

Role: Team Leader

Responsibility: Doing quality related documentation, Requirement gathering, Firmware development & debugging in C, Unit testing of code, static analysis of code using QAC tool and Test case design, execution & reporting of bugs captured while testing.

New Hydronic Control Board

Tools Used: IAR Embedded Workbench, EmbOS RTOS, and Minicube Programmer & Debugger, Dock light, Network Service Tool.

Description: This Board is intending to use in variety of control boxes like A2W Monoblock, A2W Dual zone, W2W AVA tower and Comfort Module. It involves Full CCN communication. It has boot loader capability; this allows firmware upgrade at factory End of Line through the CCN Bus. This board consists of modules like RTC, Stepper Motor driver, Relays driver, PWM driver, Triac driver, EEPROM, 3 UART Ports, zero crossing determination circuit & HV comm. drivers. EmbOS Real time Operating system which follows pre-emptive scheduling algorithm is also used in this Board.

Duration: 3 Months.

Role: Team Leader

Responsibility: Leading the team of four members, doing quality related documentation, Firmware development & Debugging using C. Communication of NHC Board with Network Service Tool. User Interface for W2W Heat Pump

Tools Used: H8 series controller with Renesas High Performance Embedded Workshop.

Description: It is having a one touch programming interface; with the Comfort Selections Home, Away and Sleep serving as the primary control Interface. The user can adjust heating and/or cooling set points for each of three comfort selections & can even choose different settings at different periods.

Duration: 3 Months.

Role: Team Leader

Responsibility: Leading the team of three members, doing quality related documentation, Firmware development & Debugging using C. Test case design, execution & reporting of bugs captured while testing. Communication of User Interface Board with Main Board via CCN protocol.

Axis Service Tool

Tools Used: PIC18F series Microcontroller with CCS C Compiler.

Description: Axis Service tool is battery operated hand held equipment that is used for testing the Functionality of a part of cancer treatment Machine. It is used to move the Leaves, Diaphragm and Wedge motors of 2TCS radiation head.

Duration: 6 Months

Role: Team Member

Responsibility: Firmware development & Debugging using C. Test plan preparation and System testing with Lab View.

MICRO INSTRUMENTS COMPANY

Research & Development Engineer

July ’07 - April’11

3 Phase Brushless DC (BLDC) Motor

Tools Used: High Performance Embedded Workshop.

Description: BLDC motors are motors that don’t use brushes for commutation; instead, they electronically commutated. Basically microcontrollers are used in this application for making them intelligent by adding features to them. Using Renesas Microcontroller following is the features being added: AUTOSTART, SOFTSTART, AUTO POWER DOWN, CONSTANT RPM AT VARIABLE AC INPUT VOLTAGE OR AT VARIABLE LOAD, TEMPERATURE CONTROLLED MOTOR, and LOW & HIGH VOLTAGE CUT OFF.

Duration: 8 Months.

Role: Team Member

Responsibilities

Analyzing the client requirement i.e. specification of required motor.

Designing of Driver circuit for 3-phase BLDC motor beginning from the basic circuit to end product.

Writing software that is compatible for different series of Microcontrollers belonging to same family & to be run on same platform of hardware.

Testing & debugging of software before actual running on hardware.

Making the footprints & draw the schematic and Layout the board.

Troubleshooting of flaws in hardware & debugging of flaws in the software to meet the end requirement.

Working on achieving noiseless motor and reliability of designed motor.

Testing the product & supporting for user acceptance test. Automatic Steripump

Tools Used: MS-DOS PROMPT, PHYTON CHIP PROGRAMMER, PROTEL DXP PCB

Designing tool.

Description: It is specially designed to aseptically transfer sterile liquids from their respective containers to the Stericheck canisters through sterile tubing. It is a compact machine that can be easily accommodated on the workstation under a Laminar Flow Bench.

Duration: 8 Months.

Role: Team Member

Responsibility:

Master Slave Mode Using Serial Communication.

Master and PC Serial Communication via USB Interfacing Chip.

Master and Graphical LCD Interfacing.

Interfacing of Micro Controller with Serial Memory, RTC, TIMER, ADC, Keypad (2*2), Photo Electric Sensors and Temperature Sensor.

Micro Dispenser

Tools Used: MS-DOS PROMPT, PHYTON CHIP PROGRAMMER, PROTEL DXP PCB Designing Tool.

Description: It is an Instrument used in biomedical firms, to dispense a specific and accurate volume of parenteral drug in sample form. It can dispense an accurate Volume as low as 0.1ml and Flow Rate as low as 0.3 ml/minute.

Duration: 3 Months.

Role: Team Member

Responsibilities: Firmware development & Debugging using C. This Project Includes Interfacing Controller With Serial Memory, LCD, Keypad (2*2) And Micro Stepper.

ACCOLADES & EXTRAMURAL ENGAGEMENTS

ISTQB Certification - Foundation Level Certification in Software Testing

Got “Star of the Month “Appreciation award during my employment in L&T Technology Services.

Got Excellent Appreciation from customer for technical, email conversation skills, compensation for the offshore shift time zone between US and India and acceptable to American standard of technical work and communication PERSONAL DETAILS

DOB 17 Dec, 1985

Father’s Name Om Prakash

Mother’s Name Swarna Devi

Marital Status Married

Nationality Indian

Passport No G4756448

PAN No AXFPK9961L

EDUCATION

Bachelors of Engineering (Electronics & Communication) KU – Kurukshetra University, Haryana, India JULY’04 – JUNE’07 Percentage (69.3%)

Diploma (Plastic Technology)

Govt. Polytechnic, Ambala City, Haryana, India JULY’01 – JUNE’04 Percentage (65.15%)

DECLARATION

I consider myself confident and familiar with Team Leading aspects. I am confident of my ability to work in a team with my latest knowledge. I hereby declare that the Information furnished above is true to the best of my knowledge.

Harish Kumar

Gurgaon

Contact this candidate