Power Plant Project

Curriculum vitae

Anandhababu.r

Rigging Foreman

Udayarkudi

Muthamizh Street,

kattumannarkoil P.O,

Cuddalore District-608301,

Tamil nadu, India

Contact+917*********

009***********, Email- *************@*****.***

Post applying for – Rigging foreman

Profile

I am certified Rigging Foreman& PTW Holder with 11 years 2 month of professional experience gained from Qatar, Saudi Arabia, Abu Dhabi, as well as India have worked for Oil & Gas offshore, onshore construction and civil construction projects. Possess extensive lifting management skills, a good knowledge of lifting plan preparation and has the ability to work effectively in a foreign environment, site based or office based, independently or as part of a team and under pressure of extreme workloads.

Education

ITI Industrial Training Institute Tamil Nadu (India)

H.S.C – board of Higher Secondary School Tamil Nadu, India.

S.S.L.C – board of Higher Secondary School Tamil Nadu, India.

TECHNICAL QUALIFICATION

Windows

MS-Office (MS- Word, Excel, Power point, Access)

Basic Computer Hardware and Maintenance

ASNT American standard, NDT nondestructive test. ASNT LEVEL-II,2013

Conversant with Windows Operating System, Microsoft-Office (Excel, Office Outlook) and Internet Applications

Training Course completed in Qatar Gas Company – North. Qatar.

Completed Electronic Permit system training.

Completed SAP Training

Completed JSA - job Safety Analyses Training

Completed PTW receiver & Applicant (card Holder)

Completed H2S Effect & Escape Hood Training

Completed Work at Height training

Completed IIF (Incident Injury Free) training.

Highlights of Qualification

Demonstrated knowledge of and skills in safe rigging practices

Able to identify, comprehend and perform crane signals

Well versed in effectively communicating hoisting problems to concerned personnel

extremely skilled in hand rigging procedures

preparing Lifting plan & understand lifting plan

Professional Experience in Abroad – 11 years& 2 months

1.Nico International L.L.C Company Fujairah. Dubai,

Position – Rigging foreman (PTW holder)

February 2019 to March 2019

Worked in Nico International company for the client Dubai Gas Company DUGAS,MTBE shutdown. In Jebel Ali, Dubai.

Job Responsibility in Qatar Gas

Daily preparing work permits as per job.

Successfully removed & fix back safe completion of heavy valves 16 ton duringshutdown.

Removing and fix back Exchanger tube bundle by bundle puller.

Heavy valves manual handling activity inside reactor area.

Heavy lifting beam trolley fixing for heavy valves removal jobs

Exchanger bundle loading & offloading jobs

PSV valves remove and fixing jobs. During shutdown.

Daily receiving work permits for crane entry and rigging activity.

2.Dopet –Qatar, Doha Petroleum Construction Company, Doha, Qatar.

Position – Rigging Foreman (worked as acting supervisor)

February 2016 to October 2018

Worked in Dopet Doha Petroleum Corporation for the client Qatar Gas, Maintenance& Shutdown jobs World largest premium LNG plant, RasLaffan Industrial City, Doha, Qatar.

Job Responsibility in Qatar Gas

Preparing JSA & other supporting document FRA, MSDS, FRA other documents for shutdown jobs

Successfully completed 4 times All Qatar Gas LNG shutdown & preparation jobs.

Every day closing all expiry permits & auditing permits every month in Qatar gas

Preparing permits for pre shutdown activity loading / offloading N2 skid, other heavy equipment’s

Before starting the job site preparation & communicate with Qatar gas permit coordinator discussing regarding jobs.

TBT must be explained job scope and Qatar gas rules and regulation policies, arranging barricade safety requirements as well.

Assist to method statement preparing for heavy lifting.

Understanding the lifting plan & ISO metric drawing of Rigging

Hiring Heavy crane assembling / dismantling during shutdown & permit preparation.

Assis to rigging coordinator for heavy lifting preparation & site visit measurement, assist lifting plan preparation.

Remove and fix back EOT crane crab unit successfully in QG train-4. During shutdown

Rigging assistance for daily Routine jobs like PRV removal and fix back, Overhauling of Overhead cranes and other everyday activities which demand lifting, shifting activities

Supervising and coordinate activities of workers in maintenance job & during shutdown.

120 ton Large FCW exchanger’s loading / offloading activity in during shutdown.

Removal /Fixing of Exchanger bundles during shutdown activity

Site preparation for steel plates & wooden pieces laying for heavy lifting activity

Daily take tool box talk with Rigging team & Receiving the job from rigging coordinator and the job will safely completed as per safety procedures.

Every day receiving mail from client’s for next day job plan after that arranging resource.

Critical lift / control valves removed & fix back & plate heat exchanger removal / fixing during train-4, tain-5, train-6, train-7 shutdown.

Worked in shutdown jobs also & advance preparing shutdown rigging tackles for LNG shutdown.

Well coordinating with Qatar gas client’s for next job activities,

Advance preparing Equipment’s & vehicle passes for shutdown activity.

Preparing hot work permits & vehicle entry permits for heavy lifting activity like exchanger, tube bundle removal, plate heat exchanger remove & installation jobs.

Daily take tool box talk with Rigging team & Receiving the job from rigging coordinator and the job will safely completed as per safety procedures.

Every day receiving mail from client’s for next day job plan after that arranging resource.

Advance preparing Equipment’s & vehicle passes for shutdown activity.

Understanding the lifting plan & ISO metric drawing of Rigging

Identify various rigging techniques to assist in developing of rigging plans and procedures.

Assist to method statement preparing for heavy lifting.

Supervising and coordinate activities of workers in maintenance job & during shutdown.

Electronic Permits applying in SAP system in Qatar gas Operating Company LTD.

Provision of supervision, support and direction in all (Electronic PTW) activities to assure

Perform cleanliness and maintenance duties on rigging equipment and tools

Work is being carried out with HSE guidelines, permit to work and company procedures.

Assist to PLT ( Proof Load Test ) & SWL for All EOT crane activity in Qatar gas plant

Proof load test weights shifting and relocating for EOT crane load test activity in All Qatar gas plant.

Every day put revalidation requested in E –permit system for next day activity

Daily coordination of the Permit to Work (PTW) system for rigging activities.

Coordinating with garage supervisor for vehicle new updating documents’ with certificates.

Before applying permits should site visit after that preparing JSA, MOS& other supporting documents. Discussed with safety officer.

Conduct Tool Box Talk every day morning at site, before start the job

Taking adequate care to preserve the permit in good condition.

Communicate with construction staff using verbal communication or hand signals so as to ensure the safety and correct movement of heavy equipment or materials

Preparing permits for Daily PRV, NRV, Control valve removal & fixing back Maintenance activity

Assess the need for and capabilities of various construction-related equipment to assist Task Force personnel in activities

Preparing Daily reports, time sheets, etc...

Maintaining proper records of all permits and associated certificates rose in connection with operation and Mechanical activities.

Assist with coordination and forward planning to ensure that all permit requirements are pre-planned ready for start of next day’s work.

Tracks work permits through the entire life cycles from initial stage to complete /close out. Ensure record keeping requirements are met. Maintains daily permit log, listing permit type issues, location and scope of work.

3.Euro Mechanical & contracting company,Das Island offshore ADGAS & ADMAAbu Dhabi

Position - Lead Rigger (PTW holder)

December -2014 to February 2016

Worked in Euro Mechanical for the client ADGAS, LG7 power generation unit, project & shutdown jobs(Abu Dhabi Gas Liquefaction Company LNGplant off shore, Abu Dhabi,

Job Responsibility in ADGAS

Understanding the lifting plan & ISO metric drawing of Rigging

Daily coordination of the Permit to Work (PTW) system for rigging activities.

Worked as a acting Rigging foreman in Das islandLG7 power generation unit new power plant turbine installation project & maintenance LNG.

Success fully installed new 3 no’s stack (chimney) in power turbine new project. Got safety award also.

Success fully installed 22 ton caca cooler ( part of turbine )

Assist to heavy turbine & various type of heavy materials received from Das island port area to shifting project.

Worked in shutdown jobs also & advance preparing shutdown rigging tackles for LNG shutdown.

Site preparation steel plates& house keeping the work location for crane moving to work location and heavy lifting activity in project

Preparing permits for exchanger lifting & other supporting documents.

Assist to Daily Rigging activity Exchanger, Valve, & other equipment removal & fixing back activity

Arranging crane hook block changing and cane counter weight assembling / Dismantling

Arranging Manpower, Equipment’s (Crane, trailer & rigging tackles as per daily plan for project.

Assisted the supervisor and crew as needed

Worked onsite at customer locations

Following always as per safety procedure.

Great knowledge of the operational characteristics and capabilities of light and heavy construction equipment

Sound knowledge of heavy rigging operations, including the use and application of rigging tools.

4.Trags Engineering Company W.L.L Qatar QAFCO – UMM SAEED, Qatar.

Position – Rigger

February-2014 to April -2014

Job Responsibility in QAFCO& QVC

Worked in Trags engineering for the client QAFCO& QVC Shutdown job in Umm mesaied Industrial area. Doha, Qatar.

Preparing permits for daily activity, pipe spool replacement and other jobs.

Assist to Tandem lifting the GRP metal exchanger & installed on the top elevation

Assist to QVC client provided crane rigging crew for shutdown related activity

Pipe spools & control valves removal & fixing activities

Attach loads to rigging machinery in order to move them from one place to another

Arranging crane & boom tuck for shifting shutdown materials like heavy generator, manifold, hoses and other materials as per client requirement

All related shutdown activities like stationary vessels, columns, Exchangers, Valves, Modification jobs etc.

Site preparation steel plates & house keeping the work location for crane moving to work location and heavy lifting activity.

Removal & fix back valves(Gate valve, Butterfly valve, NRV, Ball valve, Adjustable Check valve, Globe valve etc.) During shutdown.

Perform pulley and block attaching a activities

Ensure that pulleys and blocks are properly attached to beams, ceilings and pole booms

Handle the movement of heavy equipment with the help of controls

Perform cleanliness and maintenance duties on rigging equipment and tools

5.Madina Group W.L.L Qatar Ras Gas in RasLaffan Industrial City, Doha, Qatar.

Position - Lead Rigger cum permit holder

September-2013 to December 2013

Worked in Madina Group for the client Ras Gas, AKG Shutdown jobs World largest premium LNG plant, RasLaffan Industrial City, Doha, Qatar.

Job Responsibility in RAS GAS

Worked as acting Rigging foreman for Ras gas AKG -1 shutdown successfully completed.

Remove / fix back control valves & pipe spools in During RG shutdown.

Worked in shutdown jobs also & advance preparing shutdown rigging tackles for AKG-1 shutdown.

Lifting / shifting shutdown related heavy equipment’s & mobilization during shutdown.

Arranging crane hook block changing and cane counter weight assembling / Dismantling

Preparing hot work permits & vehicle entry permits for heavy lifting activity like exchanger, tube bundle removal, plate heat exchanger remove & installation jobs.

Assist to All related shutdown activities like stationary vessels, columns, Exchangers, Valves, Modification jobs etc.

Rigging assistance provided to mechanical activities & supporting

Exchanger removal & fix back activities

Control valve removal & fix back, blinding / De blinding activities

Large equipment’s loading / offloading activity in site

Heavy DG mobilization & De mobilization jobs for shutdown jobs.

Loading & offloading All shutdown related materials and mobilization / De mobilization shutdown equipment’s

Always working with safe Ras gas safety procedure & policy

Assist to Bundle pulling activity

Ensure compliance to safe rigging practices at every step of the rigging process

Ensure that all rigging gear is stored in a proper manner and is ready for the next shift

Assemble and dismantle rigging equipment at the end of each shift

6.Nesma Partners & Contracting Company, Saudi Arabia client Aramco SATROP Project. Jubail Saudi Arabia.

Position - Rigger

April 2011 to July 2013

Worked in Nesma Partners Company for the client SATROP Saudi Aramco Project in Jubail Industrial area, Saudi Arabia.

Job Responsibility in SATROP Refinery project

Assisted to the foremen and crew as needed

Lifting & shifting the lots of pipes, fabricated pipe spools, new valves, instrument valves & other materials from the warehouse to site

Lifting Elbow shape pipes and fit up on the top elevation

Lots of site project equipment’s shifted from warehouse to site

Rigging assist to fabricator & pipe fitters

Maintain Good House keeping

7.Lahoud Engineering contracting company, Qatar (Olefin Project – Raslaffan Industrial city) Doha, Qatar.

Position – Rigger

February 2008 to December 2010

Worked in LahoudEngineering Company for the client Olefin RLOC Project in RasLaffan Industrial city, Doha, Qatar.

Job Responsibility in OLEFIN project

Erection Heavy pipes on the pipe rack

Worked and assist to new furnace installed.

Rigging assistance to furnace cover installed & fit up

Control valves & instrument valves installation activity

Ensure that the selected cables, pulleys and winches are in accordance to the weight of the equipment that needs to be hoisted or moved

Perform cleanliness and maintenance duties on rigging equipment and tools

Professional Experience in – India

8.Anchor Offshore contracting Company, Mumbai, India

Position – Rigger

February 2007 to December 2007

Worked in Anchor Offshore contracting company client for ONGC in Mumbai,

Job Responsibility in offshore barge

Perform cleanliness and maintenance duties on rigging equipment and tools

Assist to mechanical teams

Loading materials & other materials on barge

Personal Information

Nationality : Indian

Pass port no : R- 2280760 ( ECNR)

Pass port expiry : 27-05-2027

Date of birth : 13-05-1988

Thanks Date:

You’re faithfully

Anandhababu

Contact this candidate