SREEJITH SASIDHARAN NAIR

Mobile: +965-******** E-Mail: ac9u4i@r.postjobfree.com E-Mail: ac9u4i@r.postjobfree.com CAREER PROFILE:

System Engineer/Commissioning Engineer / SCADA Developer / PLC Programmer / Field Engineer Currently working with Almeer Technical Services Company. Tasks includes Digital Oilfield Services Projects, Maintenance Projects, Automation Engineering and design, SCADA Development, (PLCs) Programmable Logic Controllers, (RTUs) Remote Terminal Units, (DCS) Distributed Control Systems, Industrial Communications, Field Instrumentations, Telemetry. 08 years extensive experience in Process Control Instrumentation with cross - functional expertise in Engineering, Commissioning & start-up, Maintenance, DCS, SCADA PLC and RTU Engineering & Administration. Expert in resolving unusual and complex automation, Control and Instrumentation systems problems

(troubleshooting), Proficient in Automation programming and Modeling Software’s. KEY AREAS OF EXPERTISE:

COMMISSIONING & START-UP

SCADA, PLC, RTU & DCS well verse with process flow diagram, piping & instrumentation drawing (P&ID) cause & effect / functional logic diagram, loop drawings, motor control circuits & interlocks, Field Instruments from Primary to Final Control element.

MAINTENANCE MANAGEMENT

Development of maintenance program preventive & corrective, checklist, improvement of equipment performance

/ reliability& efficiency, root cause analysis, Resource Management & communications with different departments, vendors and suppliers

SCADA & HMI

Emerson Remote Automation Solution Open Enterprise OE SCADA 3.1, IX Beijer Electronics SCADA / HMIs, WounderWare Intouch, GE Ifix, Schneider Citect.

PLC, RTU & DCS

IEC 61131-3 Standard Programming languages (LD, FBD, ST, IL, SFC) WORK EXPERIENCE:

Emerson Control Wave Micro, Emerson Control Wave PAC & Redundant Systems, Schneider SCADA PACK, Emerson Delta V DCS.

TRAININGS:

Allen Bradley 1200 Series A, Siemens S7-200, GE Fanuc Versamax, Modicon Twido. Successfully completed ROCKWELL AUTOMATION’S “System Integrator Induction Training on System selection Tools, Logix programming and View/ HMI programming”. FIELD EXPERTISE

Maintenance of HORIZONTAL PUMPING SYSTEMS (REDA HPS), Maintenance of CHEMICAL INJECTION SYSTEMS, Maintenance of SOLAR SYSTEMS, Field Commissioning of RTU’s, PLC’s, Integrating Modbus devices (SERIAL/TCP), Wireless HART devices with RTU, DCS & PLC Systems, Field Troubleshooting, Telemetry Systems. INDUSTRIAL COMMUNICATIONS

Ethernet IP, Modbus RTU/TCP, RS232, RS485, HART & Wireless HART, WMP protocols, Bristol BSAP, OPC, DNP3, Industrial Wireless communications.

INFORMATION AND TECHNOLOGY

Microsoft Office (MS Word, MS Excel, MS PowerPoint, MS Visio, MS Project),Database Microsoft SQL Server, Nemetschek Vectorworks 2010, Adobe Products (Acrobat Pro, CS5 Photoshop), Modsim & Modpoll. SAFETY AND ENVIRONMENT SYSTEM

Process safety concept, risk assessment, management of change and permit to work system. EMPLOYMENT:

Responsibility Summary:

ALMEER TECHNICAL SERVICES COMPANY AHMADI, KUWAIT

SYSTEM ENGINEER / COMMISSIONING ENGINEER 2015 December –till Present

•Preparation of engineering deliverables such as Instrument Design Basis, Specification (field instrumentation and control system) Datasheets, Cause and Effect Chart, Control Narratives, Material Requisitions, Cable Schedule, Loop Drawings.

• Review/check of design deliverables like Instrument Index, I/O lists, Alarm Set Point List, Wiring, Hook-up, Cable Block Diagram. Cable Schedule, Instrument Location Layouts, Cable Routing Layouts, Control Room Layouts, Instrument MTO etc.

• Review of Instrument Location Plant, Cable Routing/JB layouts, Control Room Layout, Cable Block diagram etc.

• Review of P&ID.

• Planning and scheduling of E&I Activities.

• Involved in the functional tests, loop tests, calibration of the field instruments and analyzed the failures related to instrumentation systems and components and recommends corrective actions to prevent re- occurrence.

• Instrument procurement activities such as interaction with vendors, technical evaluation of bids and preparation of purchase recommendation and also shop floor inspection.

• Field engineering include preparation of instrument plot plan (points and lines), hook up diagram, field termination diagram, cable list, estimation of erection bill of material such cables, tubes and structural steels etc.

• Maintained computer controlled processes such as communications, network cards, wiring, software and hardware system of PLC and made changes in the programming when required.

• Repaired and maintained of instruments according the manufacturers specifications

• Preparation of service proposals (Man hour estimation, Method statement, Deliverable list, Pre-Bid clarification) for instrumentation related projects bid from clients like Kuwait Oil Company, Kuwait National Petroleum Company, Chevron.

• Co-ordination with Project and Client, Subcontractors/or Suppliers.

• Coordination with client engineers on Instrumentation engineering issues.

• Planning and executing Instrumentation engineering design for field instrumentation and control system.

• Development / update of the Document Register with accurate progress information on a regular basis.

• Preparation of Datasheet of Flow, Pressure, Level, Temperature Instruments

• Construction, Pre-commissioning & Commissioning support.

• Inter disciplinary coordination with other departments.

• Calibration of Pressure, Level, temperature, flow instruments and Transmitters

• Supervision of construction work, preparing daily work plan, work progress report etc.

• Coordination with other construction engineers from different disciplines like mechanical, piping and electrical and reporting the progress in work to the area construction Manager.

• Loop checking, Configuration & Commissioning of DCS, ESD, SCADA, HMI and PLC. Projects:

Digital Oilfield Project and Maintenance for KOC WK & SEK Oilfields, 200 ESP & Water Wells with KOC

(WSG) Well Surveillance Group through Baker Hughes Contract, Installation, and Commissioning & Maintenance of Emerson field instruments, PLCs, RTUs, and SCADA system. Duties / Responsibilities:

Design, testing and Configuration of RTU panels and Calibration of Field Instruments.

Emerson’s Control Wave Designer logic programming to interface with ESP Controllers and Down Hole Gauges (DHG).

SCADA Designing using Emerson’s Open Enterprise 3.1.

Configuration and Installation of RTU panel according to the well type (ESP or NF) and ESP & DHG specifications.

Establishing the communication between ESP, DHG, Wireless Transmitters (using HART) & Gas detectors

Simulation using MODSIM and MODPOLL.

Integration of Serial Communication from ESP (Uniconn Instruct, ElectroSpeed Advantage etc), DHG ( Zenith, Wellift, Pheonix etc ), Chemical Injection ( Summit, Sirius), Water cut meter ( Red Eye Weatherford), Solar Charge Controller ( Ever exceed, EP Solar ) to Emerson RTU.

Installation of the Solar panels and Solar Charge Controllers for Natural Flow wells.

Field installation and Commissioning of RTU panel, instruments and verifying the Data.

Preparing of the projects monthly Ticketing and invoices from submission and approval with contractors, KOC client, Purchase Order and Invoices releasing from the contractors.

Pilot projects including Communicating Chemical Injection Controller to RTU for monitoring and controlling through point to point radio.

Water Irrigation Automation Project for Ministry of Electricity and Water (MEW). Duties / Responsibilities:

Development of SCADA system for Water Irrigation Automation using BEIJER Electronics- iX Developer.

Development of RTU program in Control Wave Designer for Water Irrigation Automation and also for establishing DATA communication between Weather Station and RTU.

Site Installation of the Automation Panel with Local HMI.

Panel wiring for RCVs, Flow Switch, Flow Meter and Weather Station Communication System.

Functional Testing & commissioning of Automation Panel & SCADA System.

Integrating Beijer SCADA with Control wave Micro PLC.

Integrating Automation Panel Data to Honey well DCS system

DESIGN, INTEGRATION, INSTALLATION AND COMMISSIONING OF RTU AND SCADA SYSTEM IN OIL WELLS UNDER KUWAIT INTEGRATED DIGITAL OIL FIELDS(KWIDF) FOR KOC SOUTH, EAST AND WEST KUWAIT OIL FIELDS.

Duties / Responsibilities:

Commissioning activities including SAT for Single Well, Well Pad, Water Injection Wells.

Emerson’s Control Wave Designer logic programming to interface with ESP Controllers, Down Hole Gauges (DHG), Field Instruments.

Integration of RTU’s with existing SCADA Emerson’s Open Enterprise 2.8.

Integration of Serial Communication from ESP, DHG, Chemical Injection, Water cut meter (Red Eye Weatherford), Solar Charge Controller ( Ever exceed, EP Solar ) to Emerson RTU.

Integration of E & H Flow meter to Rosemount Wireless HART Gateway using Thumb adapter and communicating it to RTU.

Installation of the Solar panels and Solar Charge Controllers.

Field installation and Commissioning of RTU panel, instruments and verifying the Data.

ENGINEERING, DESIGN & COMMISSIONING FOR SPM BUOY REFURBISHMENT AND CHAIN REPLACEMENT

(TELEMETRY) FOR SAUDI ARABIAN CHEVRON (OFFSHORE PROJECT) Duties / Responsibilities:

Engineering, Installation, Commissioning, Configuration of Telemetry Systems. (Wireless Radio PROSOFT, RTU, SCADA, HMI, DCS etc).

Development of SCADA and HMI for different locations using Beijer IX Developer.

Flash Configuration and programming of Emerson Control Wave Redundant RTU and Emerson Control Wave PAC, IO Expansion Rack.

Integration of Emerson’s Control Wave RTU and Siemens PLC for monitoring and Control of PLEM Valves located in the Sea bed.(Including ESD)

Preparation & Installation of Power Distribution Panels.

Configuration of Radio (PROSOFT- Industrial Hotspot, Frequency Hopping, 4G) and alignment using Radio alignment tool and integrating radio signals to RTU through MODBUS & integrating radio signals to DCS using Radio Linx OPC Server.

Configuration of Sea Data Sensor (AWAC) using AWAC AST Software and communicating sea data parameters to STROM Controller and then to RTU through MODBUS.

Solar charge Controller (TRISTAR) - Communicating Solar parameters to RTU through MODBUS.

Configuration of Weather Station (GILL) using MAXIMET Software and communicating Weather data parameters to RTU through MODBUS.

Power Supply (PHEONIX) - Communication to RTU through MODBUS.

Navigational Aid (ORGA) - Communication to RTU through MODBUS.

Bird Deterrent System (SCARE CROW) - Integration to RTU.

Preparation of RTU panel, Solar Panel, Tanker Portable Unit.

Integration of RTU’s and SCADA with Emerson DeltaV DCS using RTU Connect software and OPC mirror.

Pre-commissioning & Commissioning Activities including FAT & SAT. Projects:

PILOT PROJECTS:

COMMUNICATING CHEMICAL INJECTION CONTROLLER TO RTU: Established communication from Chemical Injection Controller to RTU for monitoring in SCADA through point to point radio communication. As per the client’s requirement modified the existing program and made the Chemical Injection Data available in the SCADA for daily monitoring

REMOTE START AND STOP OF VFD (SLB UNICONN VSD & ELECTROSPEED ADVANTAGE): Developed logic in Emerson Control Wave Micro for Remote Start and Stop for SLB VSD & Baker Hughes ESP Panel and successfully tested with client for operating from SCADA.

COMMUNICATING SCHNEIDER SCADA PACK RTU AND FIELD INSTRUMRNTS FOR WELL TESTING: Developed logic in TELEPACE STUDIO & IEC WORK BENCH for monitoring the well head parameters and logging in SCADA.

MARK TECHNOLOGIES COMPANY WLL, KUWAIT

ELECTRICAL ENGINEER 2013 May –2015 September

HORIZONTAL PUMPING SYSTEM (HPS) & CHEMICAL INJECTION UNIT MAINTENANCE FOR KOC -M/S. SCHLUMBERGER SUBCONTRACT.

Duties / Responsibilities:

Commissioning and pre-commissioning of the entire DCS panel, variable speed drive for HPS.

Maintenance of HPS and Chemical Injection Unit on a regular routine, Generators.

Monitoring and controlling of HPS from DeltaV DCS.

Preparation of Monthly tickets and maintenance reports to client.

PART OF THE PROJECT TEAM AS AN ELECTRICAL ENGINEER IN EPF (EARLY PRODUCTION FACILITY) FOR ESTIMATION OF ELECTRICAL AND INSTRUMENTATION WORKS WITH M/S. KOC (KUWAIT OIL COMPANY) UNDER M/S. LEAP FROG SUBCONTRACT.

PART OF THE CONSTRUCTION TEAM AS A FIELD ENGINEER RESPONSIBLE FOR THE INSTALLATION OF MULTIPOINT SMOKELESS HIGH PRESSURE FLARES AT 14 GC’S FOR M/S. KOC (KUWAIT OIL COMPANY) UNDER MUSHRIF SUB CONTRACT.

GLOBAL VISION TRADING COMPANY KUWAIT

PROJECT SUPPORT ENGINEER 2012 October –2013 January Duties / Responsibilities:

General Bid submission and further enquires related to the bid.

Pre-commissioning of documents related for the approval from the client. ALMEER TECHNICAL SERVICES COMPANY AHMADI, KUWAIT

INSTRUMENT TECHNICIAN 2012 March –2012 May

Duties / Responsibilities:

Worked in PIC (Petrochemical Industries Company) for the turnaround 2012. (A petrochemical & manufacturing plant - specialized in liquid Ammonia, Urea and polypropylene. My job profile is basically a shutdown job and it includes Plant Maintenance and commissioning of instrumentation used in petrochemical industries mainly Control Valves (over hauling and maintenance). EDUCATION:

BACHELOR OF ENGINEERING-ELECTRICAL & ELECTRONICS 2007-2011 Srinivasa Institute Of Engineering & Technology - Anna University, Chennai-25. Percentage : 65%

HIGHER SECONDARY 2006-2007

St Joseph’s Hr Sec School, Thirthuvapuram.

Percentage: 79.9%

S.S.L.C 2004-2005

Christuraja Matric and HS School, Marthandam.

Percentage: 76%

TRAINING & CERTIFICATION:

Certified course and training on RA 801- OPEN ENTERPRISE BASICS 3.1 from EMERSON PROCESS MANAGEMENT.

Certified course and training on COURSE 441- CONTROLWAVE DESIGNER FUNDAMENTALS from EMERSON PROCESS MANAGEMENT.

As a part of System Integration, attended a certified Training with Rock Well Automation on STUDIO 5000

& FT VIEW STUDIO SE.

Certified course of INDUSTRIAL AUTOMATION from SMEC labs [SCADA, PLC, VFD & HMI]

Was a part of National Franchisee Training Program conducted by Ministry of Power (TANGEDCO). PERSONAL DETAILS:

DOB : 27 JULY 1989

Nationality : Indian

Marital Status : Married

Passport No : P3821025

Civil ID No : 289*********

Driving License No : 21274624 (KUWAIT)

References : Will furnish upon request

Permanent Address : Sreevalsam21/8A, Perentheru, Kuzhithurai (PO), Vilavancode (TK), Kaniyakumari (DT), India-629163.

Languages Known : English, Malayalam, Tamil (Speak, Read, Write) DECLARATION:

I hereby declare that the details given above are true to the best of my knowledge.

(SREEJITH S NAIR)

DATE:

Contact this candidate