Power Plant Welding
Resume:
MARIO P. PORLAJE
Position Applied for: Combination SMAW / GTAW
5.8 years experience abroad
6.4 years experience local
Objectives
To comply work instruction with full compliance of my task assignment. To achieve more Impressive performance as well as my knowledge and experienced in welding and fabricating.
Duties and Responsibilities
Freelance: From june 2017 up to Present
1.A lways Observe safety and wearing PPE’s at all time.
2.Responsible of fabricating, layout, and in instructing associates co- worker for their task.
3.Fabricate of steel truss, steel beams and and installation on site as per client blue print issued
4.Cutting of steel beams by use of oxygen accetylne and grinding, beveling blend sharp edges
5.Responsible for the full welding of steel truss with 100% ultrasonic test.
Company : GS construction arabia company ltd.
Position : Tig welder
Location : Rabigh kingdom of Saudi arabia
Duration : 28 october 2015 up to 27 May 2017
Project : Petro rabigh II project
Unit handled : Petro rabigh corporation
Duties and responsibilities:
Observe safety rules and regulation
Always do housekeeping before and after work
preparation of material to be use in fabrication or worksite
Cuttting of pipe and structural beams
Can operate manual gas cutting
Can operate plasma cutting
Manual grinding and beveling of pipes, plate and beams
Assist pipe fitter for fit – up and tack the pipe and pipe supports
Full welding of pipes with proper checking of welding inspector
Full welding of carbon steel, full GTAW by using er70s filler wire
Full welding of stainless steel, full GTAW by using e308, e316 filler wire
Full welding of pipe butt joint carbon steel by using er70s filler wire for 1st pass and 2nd pass and e7018 electrode for filling and final capping.
With 100 % radiographic test
Assigned in welding repair of stainless tanks
Full welding of pipe jacket, pipe supports and structural beams.
Company : Atlantic gulf and pacific company of manila, inc.
Position : Combination Smaw / Gtaw
Location : Batangas city. philippines
Duration : 14 March 2015 up to 24 October 2015
Project : Ichthys project
Unit handled : Atlantic gulf and pacific company of manila, inc.
Duties and responsibilities:
Ensure work area is free of hazards and always think safety at all times
preparation of material to be use in fabrication or worksite
Cuttting of pipe and structural beams
Can operate manual gas cutting
Manual grinding and beveling of pipes, plate and beams
Assist pipe fitter for fit – up and tack the pipe and pipe supports
Full welding of pipes with proper checking of welding inspector
Full welding of carbon steel, full GTAW by using er70s filler wire
Full welding of stainless steel, full GTAW by using e308, e316 filler wire
Full welding of pipe butt joint carbon steel by using er70s filler wire for 1st pass and 2nd pass and e7018 electrode for filling and final capping.
With 100 % radiographic test
Full welding of pipe jacket, pipe supports and structural beams.
Company : Daewoo engineering and construction
Position : Tig welder
Location : Port moresby, papua new guinea
Duration : 10 december 2011 up to 20 january 2014
Project : PNG LNG PROJECT
Unit handled : CHIYODA AND JGC JOINT VENTURE
Duties and responsibilities:
Safely and productive assemble and weld components according to welding procedure specification
Ensure that welding equipment and tools are maintain for their good running and perform repair jobs without much assistance
Preparation of material to be use in fabrication or worksite
Cuttting of pipe and structural beams
Can operate manual gas cutting
Manual grinding and beveling of pipes, plate and beams
Assist pipe fitter for fit – up and tack the pipe and pipe supports
Full welding of pipes with proper checking of welding inspector
Full welding of carbon steel, full GTAW by using er70s filler wire
Full welding of stainless steel, full GTAW by using e308, e316 filler wire
Full welding of pipe butt joint carbon steel by using er70s filler wire for 1st pass and 2nd pass and e7018 electrode for filling and final capping.
With 100 % radiographic test
Full welding of pipe supports such as: dummy, tronion and structural beams
Company : keangnam enterprises ltd.
Position : Tig welder
Location : Toamasina / tamatave madagascar
Duration : 03 june 2010 up to 13 June 2011
Project : Ambatovy power plant
Unit handled : EXXON MOBIL
Duties and responsibilities:
Show high regard for personal safety and safety of workmates
Assist and prepare all material that are need to be use in fabrication
Cutting of pipe and structural beams
Grinding and beveling of pipe and structural supports
Full welding of carbon steel pipe with full GTAW by using er70s filler wire
Full welding of carbon steel pipe with GTAW + SMAW by using er70s filler wire for 1st pass and 2nd pass and e7018 electrode for filling and final capping.
With 100% radiographic test
Full welding of tanks and structural beams
Full welding of pipe supports such as: dummy, tronion, spring support and pipe shoe
Welding of copper tube by using copper filler wire
Operate power tools and manual gas cutting
Company : Samchang enterprises company ltd.
Position : Plate welder
Location : Ras Laffan industrial city, qatar
Duration : 04 December 2008 up to 30 November
Project : Shell pearl gas to liquid project
Unit handled : Hyundai heavy industries company ltd.
Duties and responsibilities:
Ensure work area is free of hazards and maintain housekeeping before and after work
Assist and prepare all materials that are need to be use in fabrication and worksite
Read and interpret blue print
Cutting of H – beam and structural supports
Grinding and cleaning of sharp edges of H-beam, C channel and angle bars
Mark up and holes the beams, C channel and angle bars by using of electric drill machine
Lay out and fit-up according to the blue print and instruction of supervisor
Tack and full welding of structural beams and instrumentation supports
Painting of structural support that are need to the worksite
Install electrical panel support in worksite
Install instrumentation support in worksite
Install lightings support in worksite
Company : TPS metal and advertising corporation
Position : Structural welder
Location : Palanan Makati city. philippines
Duration : September 2004 up to 21 October 2008
Project : Structural signages and stainless metal works
Duties and responsibilities:
Eliminate first the hazards in the area of work and always think safety at all times
Assisting co-work for the prepation of all materials that need to be use in fabrication
Ensure all power tools and equipment are in good running condition
Manual gas cutting of steel plates and structural beams
Grinding and cleaning of sharp edges parts of metal
Fit-up and tacking
Mark up and holes by using electric power drill
Full welding of structural beams, C channel and angle bars
Painting of structural beams and panel support.
Buffing and cleaning of all stainless metal sign
Install metal sign and signages in worksite
Personal information:
Age : 39 Years old
Date of birth : 02 February 1979
Place of birth : Ligao albay
Civil status : Married
Gender : Male
Height : 5’ 6”
Weight : 58 kgs.
Citizenship : Filipino
Education attainment:
Vocational : Technical education and skills development authority
Course : Shielded metal arc welding NCII ( plate welding )
Year graduated : 09 July 2007 up to 20 July 2007
Vocational : Philippines science and technology center
Course : Computer technology
Year graduated : 1998 – 2000
Secondary level : Mayon high school
Year graduated : 1991 - 1996
Elementary : Pinamaniquian elementary school
Year graduated : 1985 – 1991
Trainings:
Working at height cbt course
Conducted at the pearl village training center ras Laffan Qatar
04 August 2009
Confined space entry cbt course
Conducted at the pearl village training center ras Laffan Qatar
02 August 2009
Character references:
Mr. jong son park
Busssiness manager
GS construction arabia co. ltd
Petro rabigh II project
Rabigh, kingdom of Saudi arabia
Tel: +966 (13) 8825590
Mr. ROMULO C. MERCADO JR.
Director – Human Resources
Ichthys project
San roque, buan, batangas, philippines
Phone:+63-43-727****
I hereby affirm that my statement and all information I have written are true and correctTo the best of my knowledge and belief. And I have not knowingly withheld facts or Circumstances, which would affect my application unfavorably.
Mr. MARIO M. PORLAJE
Applicant
Contact this candidate