Equipment Operator Engineering
Resume:
Mr. Robert Serito Montoya
P.O. Box ***
Lemitar, NM 87823 US
Mobile: 575-***-**** Evening Phone: 575-***-****
Email: *************@*****.***
Availability:
Job Type: Permanent
Work Schedule: Full-Time
Desired locations:
United States - NM
Work Experience:
Randy Sena Construction
2835 Chanate Ave SW
Albuquerque, NM 87105 United States
11/2017 – Present
Salary: 25.00 USD Per Hour
Hours per week: 45
Superintendent/Heavy Equipment Operator
Duties, Accomplishments and Related Skills:
Job Title: Engineering Equipment Operator
Engineering Heavy Equipment Operator of: 3500 and 7000 gallon Water Distributor Trucks; Tandem and Single-Axel Dump truck w/attachments; Crawler/Dozer; Loader; Blade; 5 and 10 yard Dump Trucks; Flow boy-tractor trailer; Transport Truck w/trailer; Rollers-Steel Wheel & Pneumatic; Mowers; Scraper; Pneumatic Tire-Tractor with cable-controlled power units; Drop Neck Trailer Transport.
Finish Blade. Process sub grade with a certain amount of water. Mix with blade until processed. When material is processed you should be able to squeeze material in your hand. It should stay together when let go, then roll with roller until it tightens up; Survey (Blue top). Cut to Blue tops, finish, take density, string line, sell, and then put in base course. Repeat process with Base course and sell finished product as quickly as possible.
Complete all sub grade and base course work for roads, interstate and highways, curb and gutter and parking lots. Run Dozers to dig retaining ponds and cut slopes. Run Loader to load trucks, stock pile and pickup winrows. Run Scraper to cut and fill roads and pickup winrows.
Blade work: On road shoulder improvement projects: Blade patching and Pot-Hole patching on asphalt roads; Cleaning out and cutting bar ditches and pulling shoulders; Building earthen banks; grading unpaved roads; Grubbing (clearing) vegetation; growth and debris; Prep and finish sub grade and base course for paving; Prepare all finish work; Operate Blades (motor graders) loaders, scrapers, dozer's and excavators.
Transport: Utilizing transport low boy and drop-neck trailer for heavy equipment transport; Utilizing flow-boy trucks to transport material to and from work sites.
Scraper: Utilization to scrape, haul and build fill roads.
Transporting heavy equipment to and from work sites: Stock piling of material and waste-material utilizing crawler and loader Earth and Debris Removal utilizing loader and dump trucks; Hauling debris & material to and from work site with dump trucks Concrete work
Daily Preventative Maintenance of heavy equipment & trucks.
Utilize variety of hand-tools: Chain Saws, Jack-hammers, Hand Augers, Fence Stretchers, Post Drivers, Post Hole Digger, Hand Saw, Grinders, Shovel, Pick, Axe, Hammer, Screwdrivers, and Wrenches
Work performed: with little or no supervision as per verbal and written instructions; through constant physical exertion essential as needed to successfully complete assigned tasks; in inclement weather, nights, weekends & holidays and call-outs; during exposure to varying weather conditions: heat, cold & freezing temperatures; rain, wind, snow storms and blizzard conditions ; with constant exposure to injury; while adhering to OSHA, Agency, and Company Safety policies; Overnight and extended travel essential to performing job duties.
Supervisor: Randy Sena 505-***-****)
Okay to contact this Supervisor: Yes
Burgess Group
Stallion Range
White Sands Missile Range, NM 88002 United States
11/2016 – 4/2017
Salary: 37.50.00 USD Per Hour
Hours per week: 55-65
Heavy Equipment Operator
Duties, Accomplishments and Related Skills:
Job Title: Heavy Equipment Operator
Perform skilled site preparation work for Construction Company; operated a variety of complex heavy construction equipment such as motor grader, roller, front-end loader, backhoe, trench digger, excavators, scraper and other light duty equipment. Utilize variety of hand-tools: chain saws, jack-hammers, hand augers, fence stretchers, post drivers, posthole digger, hand saw, grinders, shovel, pick, axe, hammer, screwdrivers, and wrenches.
Excavate foundations, level sites to fine grade specifications, prepared drainage and sewer lines, and performed gravel backfilling. Complete all sub grade and base course work for roads, interstate and highways, curb and gutter and parking lots. Compact firm and stable sub-graded base for concrete building slabs. Run dozers to dig retaining ponds and cut slopes. Run front-end loader to load trucks, stock pile and pickup winrows. Run scraper to cut and fill roads and pickup winrows. Prep and finish sub grade and base course for paving. Perform blade work on road improvement projects: patching and pot-hole patching on asphalt roads, cleared out and cut bar ditches and pulled shoulders, built earthen banks and graded unpaved roads, grubbing (clearing) vegetation, growth and debris.
Utilize Blue Top and Laser (GPS) measurement instruments for setting grade. Utilize welder for bending, building frames and repairing broken parts on equipment. Transport heavy equipment to and from work sites and debris and materials to appropriate locations.
Interpret schematic drawings, blueprints and job specifications to determine equipment requirements, layout and work sequences for assigned work. Observe work site and equipment to detect and protect against unsafe or hazardous situations and operating conditions under close guidance of the onsite supervisor. Perform preventative maintenance and repair on various construction equipment including but not limited to hand tools and power tools. Ensure that heavy equipment was safe for use by performing constant inspection checks. Perform work with little or no supervision.
Supervisor: Tom Apodaca 505-***-****)
Okay to contact this Supervisor: Yes
Randy Sena Construction
2835 Chanate Ave SW
Albuquerque, NM 87105 United States
06/2015 – 11/2016
Salary: 25.00 USD Per Hour
Hours per week: 45
Superintendent/Heavy Equipment Operator
Duties, Accomplishments and Related Skills:
Job Title: Engineering Equipment Operator
Engineering Heavy Equipment Operator of: 3500 and 7000 gallon Water Distributor Trucks; Tandem and Single-Axel Dump truck w/attachments; Crawler/Dozer; Loader; Blade; 5 and 10 yard Dump Trucks; Flow boy-tractor trailer; Transport Truck w/trailer; Rollers-Steel Wheel & Pneumatic; Mowers; Scraper; Pneumatic Tire-Tractor with cable-controlled power units; Drop Neck Trailer Transport.
Finish Blade. Process sub grade with a certain amount of water. Mix with blade until processed. When material is processed you should be able to squeeze material in your hand. It should stay together when let go, then roll with roller until it tightens up; Survey (Blue top). Cut to Blue tops, finish, take density, string line, sell, and then put in base course. Repeat process with Base course and sell finished product as quickly as possible.
Complete all sub grade and base course work for roads, interstate and highways, curb and gutter and parking lots. Run Dozers to dig retaining ponds and cut slopes. Run Loader to load trucks, stock pile and pickup winrows. Run Scraper to cut and fill roads and pickup winrows.
Blade work: On road shoulder improvement projects: Blade patching and Pot-Hole patching on asphalt roads; Cleaning out and cutting bar ditches and pulling shoulders; Building earthen banks; grading unpaved roads; Grubbing (clearing) vegetation; growth and debris; Prep and finish sub grade and base course for paving; Prepare all finish work; Operate Blades (motor graders) loaders, scrapers, dozer's and excavators.
Transport: Utilizing transport low boy and drop-neck trailer for heavy equipment transport; Utilizing flow-boy trucks to transport material to and from work sites.
Scraper: Utilization to scrape, haul and build fill roads.
Transporting heavy equipment to and from work sites: Stock piling of material and waste-material utilizing crawler and loader Earth and Debris Removal utilizing loader and dump trucks; Hauling debris & material to and from work site with dump trucks Concrete work.
Daily Preventative Maintenance of heavy equipment & trucks.
Utilize variety of hand-tools: Chain Saws, Jack-hammers, Hand Augers, Fence Stretchers, Post Drivers, Post Hole Digger, Hand Saw, Grinders, Shovel, Pick, Axe, Hammer, Screwdrivers, and Wrenches
Work performed: with little or no supervision as per verbal and written instructions; through constant physical exertion essential as needed to successfully complete assigned tasks; in inclement weather, nights, weekends & holidays and call-outs; during exposure to varying weather conditions: heat, cold & freezing temperatures; rain, wind, snow storms and blizzard conditions ; with constant exposure to injury; while adhering to OSHA, Agency, and Company Safety policies; Overnight and extended travel essential to performing job duties.
Supervisor: Randy Sena 505-***-****)
Okay to contact this Supervisor: Yes
Kirkland Construction
2101 Main St.
Rye, CO 81069 United States
01/2015 - 05/2015
Salary: 22.00 USD Per Hour
Hours per week: 45
Engineering Equipment Operator
Duties, Accomplishments and Related Skills:
Job Title: Engineering Equipment Operator
Engineering Heavy Equipment Operator of: 3500 and 7000 gallon Water Distributor Trucks; Tandem and Single-Axel Dump truck w/attachments; Crawler/Dozer; Loader; Blade; 5 and 10 yard Dump Trucks; Flow boy-tractor trailer; Transport Truck w/trailer; Rollers-Steel Wheel & Pneumatic; Mowers; Scraper; Pneumatic Tire-Tractor with cable-controlled power units; Drop Neck Trailer Transport.
Finish Blade. Process sub grade with a certain amount of water. Mix with blade until processed. When material is processed you should be able to squeeze material in your hand. It should stay together when let go, then roll with roller until it tightens up; Survey (Blue top). Cut to Blue tops, finish, take density, string line, sell, and then put in base course. Repeat process with Base course and sell finished product as quickly as possible.
Complete all sub grade and base course work for roads, interstate and highways, curb and gutter and parking lots. Run Dozers to dig retaining ponds and cut slopes. Run Loader to load trucks, stock pile and pickup winrows. Run Scraper to cut and fill roads and pickup winrows.
Blade work: On road shoulder improvement projects: Blade patching and Pot-Hole patching on asphalt roads; Cleaning out and cutting bar ditches and pulling shoulders; Building earthen banks; grading unpaved roads; Grubbing (clearing) vegetation; growth and debris; Prep and finish sub grade and base course for paving; Prepare all finish work; Operate Blades (motor graders) loaders, scrapers, dozer's and excavators.
Transport: Utilizing transport low boy and drop-neck trailer for heavy equipment transport; Utilizing flow-boy trucks to transport material to and from work sites.
Scraper: Utilization to scrape, haul and build fill roads.
Transporting heavy equipment to and from work sites: Stock piling of material and waste-material utilizing crawler and loader Earth and Debris Removal utilizing loader and dump trucks; Hauling debris & material to and from work site with dump trucks Concrete work
Daily Preventative Maintenance of heavy equipment & trucks.
Utilize variety of hand-tools: Chain Saws, Jack-hammers, Hand Augers, Fence Stretchers, Post Drivers, Post Hole Digger, Hand Saw, Grinders, Shovel, Pick, Axe, Hammer, Screwdrivers, and Wrenches
Work performed: with little or no supervision as per verbal and written instructions; through constant physical exertion essential as needed to successfully complete assigned tasks; in inclement weather, nights, weekends & holidays and call-outs; during exposure to varying weather conditions: heat, cold & freezing temperatures; rain, wind, snow storms and blizzard conditions ; with constant exposure to injury; while adhering to OSHA, Agency, and Company Safety policies; Overnight and extended travel essential to performing job duties.
Supervisor: Dick Maley 719-***-****)
Okay to contact this Supervisor: Yes
F-N-F Construction
Hwy 550 I-25
Bernalillo, NM 87004 United States
03/2012 - 12/2014
Salary: 22.00 USD Per Hour
Hours per week: 45
Engineering Equipment Operator
Duties, Accomplishments and Related Skills:
Job Title: Engineering Equipment Operator
Engineering Heavy Equipment Operator of: 3500 and 7000 gallon Water Distributor Trucks; Tandem and Single-Axel Dump truck w/attachments; Crawler/Dozer; Loader; Blade; 5 and 10 yard Dump Trucks; Flow boy-tractor trailer; Transport Truck w/trailer; Rollers-Steel Wheel & Pneumatic; Mowers; Scraper; Pneumatic Tire-Tractor with cable-controlled power units; Drop Neck Trailer Transport.
Finish Blade. Process sub grade with a certain amount of water. Mix with blade until processed. When material is processed you should be able to squeeze material in your hand. It should stay together when let go, then roll with roller until it tightens up; Survey (Blue top). Cut to Blue tops, finish, take density, string line, sell, and then put in base course. Repeat process with Base course and sell finished product as quickly as possible.
Complete all sub grade and base course work for roads, interstate and highways, curb and gutter and parking lots. Run Dozers to dig retaining ponds and cut slopes. Run Loader to load trucks, stock pile and pickup winrows. Run Scraper to cut and fill roads and pickup winrows.
Blade work: On road shoulder improvement projects: Blade patching and Pot-Hole patching on asphalt roads; Cleaning out and cutting bar ditches and pulling shoulders; Building earthen banks; grading unpaved roads; Grubbing (clearing) vegetation; growth and debris; Prep and finish sub grade and base course for paving; Prepare all finish work; Operate Blades (motor graders) loaders, scrapers, dozer's and excavators.
Transport: Utilizing transport low boy and drop-neck trailer for heavy equipment transport; Utilizing flow-boy trucks to transport material to and from work sites.
Scraper: Utilization to scrape, haul and build fill roads.
Transporting heavy equipment to and from work sites: Stock piling of material and waste-material utilizing crawler and loader Earth and Debris Removal utilizing loader and dump trucks; Hauling debris & material to and from work site with dump trucks Concrete work.
Daily Preventative Maintenance of heavy equipment & trucks.
Utilize variety of hand-tools: Chain Saws, Jack-hammers, Hand Augers, Fence Stretchers, Post Drivers, Post Hole Digger, Hand Saw, Grinders, Shovel, Pick, Axe, Hammer, Screwdrivers, and Wrenches
Work performed: with little or no supervision as per verbal and written instructions; through constant physical exertion essential as needed to successfully complete assigned tasks; in inclement weather, nights, weekends & holidays and call-outs; during exposure to varying weather conditions: heat, cold & freezing temperatures; rain, wind, snow storms and blizzard conditions ; with constant exposure to injury; while adhering to OSHA, Agency, and Company Safety policies; Overnight and extended travel essential to performing job duties.
Supervisor: Jake Salazar 505-***-****)
Okay to contact this Supervisor: Yes
AS Horner Construction
6280 State Rd. 303 SE
Albuquerque, NM 87105 United States
07/2008 - 03/2012
Salary: 20.00 USD Per Hour
Hours per week: 45
Engineering Equipment Operator
Duties, Accomplishments and Related Skills:
Job Title: Engineering Equipment Operator
Engineering Heavy Equipment Operator of: 3500 and 7000 gallon Water Distributor Trucks; Tandem and Single-Axel Dump truck w/attachments; Crawler/Dozer; Loader; Blade; 5 and 10 yard Dump Trucks; Flow boy-tractor trailer; Transport Truck w/trailer; Rollers-Steel Wheel & Pneumatic; Mowers; Scraper; Pneumatic Tire-Tractor with cable-controlled power units; Drop Neck Trailer Transport.
Finish Blade. Process sub grade with a certain amount of water. Mix with blade until processed. When material is processed you should be able to squeeze material in your hand. It should stay together when let go, then roll with roller until it tightens up; Survey (Blue top). Cut to Blue tops, finish, take density, string line, sell, and then put in base course. Repeat process with Base course and sell finished product as quickly as possible.
Complete all sub grade and base course work for roads, interstate and highways, curb and gutter and parking lots. Run Dozers to dig retaining ponds and cut slopes. Run Loader to load trucks, stock pile and pickup winrows. Run Scraper to cut and fill roads and pickup winrows.
Blade work: On road shoulder improvement projects: Blade patching and Pot-Hole patching on asphalt roads; Cleaning out and cutting bar ditches and pulling shoulders; Building earthen banks; grading unpaved roads; Grubbing (clearing) vegetation; growth and debris; Prep and finish sub grade and base course for paving; Prepare all finish work; Operate Blades (motor graders) loaders, scrapers, dozer's and excavators.
Transport: Utilizing transport low boy and drop-neck trailer for heavy equipment transport; Utilizing flow-boy trucks to transport material to and from work sites.
Scraper: Utilization to scrape, haul and build fill roads.
Transporting heavy equipment to and from work sites: Stock piling of material and waste-material utilizing crawler and loader Earth and Debris Removal utilizing loader and dump trucks; Hauling debris & material to and from work site with dump trucks Concrete work.
Daily Preventative Maintenance of heavy equipment & trucks.
Utilize variety of hand-tools: Chain Saws, Jack-hammers, Hand Augers, Fence Stretchers, Post Drivers, Post Hole Digger, Hand Saw, Grinders, Shovel, Pick, Axe, Hammer, Screwdrivers, and Wrenches
Work performed: with little or no supervision as per verbal and written instructions; through constant physical exertion essential as needed to successfully complete assigned tasks; in inclement weather, nights, weekends & holidays and call-outs; during exposure to varying weather conditions: heat, cold & freezing temperatures; rain, wind, snow storms and blizzard conditions ; with constant exposure to injury; while adhering to OSHA, Agency, and Company Safety policies; Overnight and extended travel essential to performing job duties.
Supervisor: Marty Yalch 505-***-****)
Okay to contact this Supervisor: Yes
Robert Rivera Construction
1261 Rivera Rd.
Santa Rosa, NM 88435 United States
09/2006 - 07/2008
Salary: 23.00 USD Per Hour
Hours per week: 45
Engineering Equipment Operator
Duties, Accomplishments and Related Skills:
Job Title: Engineering Equipment Operator
Engineering Heavy Equipment Operator of: 3500 and 7000 gallon Water Distributor Trucks; Tandem and Single-Axel Dump truck w/attachments; Crawler/Dozer; Loader; Blade; 5 and 10 yard Dump Trucks; Flow boy-tractor trailer; Transport Truck w/trailer; Rollers-Steel Wheel & Pneumatic; Mowers; Scraper; Pneumatic Tire-Tractor with cable-controlled power units; Drop Neck Trailer Transport.
Finish Blade. Process sub grade with a certain amount of water. Mix with blade until processed. When material is processed you should be able to squeeze material in your hand. It should stay together when let go, then roll with roller until it tightens up; Survey (Blue top). Cut to Blue tops, finish, take density, string line, sell, and then put in base course. Repeat process with Base course and sell finished product as quickly as possible.
Complete all sub grade and base course work for roads, interstate and highways, curb and gutter and parking lots. Run Dozers to dig retaining ponds and cut slopes. Run Loader to load trucks, stock pile and pickup winrows. Run Scraper to cut and fill roads and pickup winrows.
Blade work: On road shoulder improvement projects: Blade patching and Pot-Hole patching on asphalt roads; Cleaning out and cutting bar ditches and pulling shoulders; Building earthen banks; grading unpaved roads; Grubbing (clearing) vegetation; growth and debris; Prep and finish sub grade and base course for paving; Prepare all finish work; Operate Blades (motor graders) loaders, scrapers, dozer's and excavators.
Transport: Utilizing transport low boy and drop-neck trailer for heavy equipment transport; Utilizing flow-boy trucks to transport material to and from work sites.
Scraper: Utilization to scrape, haul and build fill roads.
Transporting heavy equipment to and from work sites: Stock piling of material and waste-material utilizing crawler and loader Earth and Debris Removal utilizing loader and dump trucks; Hauling debris & material to and from work site with dump trucks Concrete work
Daily Preventative Maintenance of heavy equipment & trucks.
Utilize variety of hand-tools: Chain Saws, Jack-hammers, Hand Augers, Fence Stretchers, Post Drivers, Post Hole Digger, Hand Saw, Grinders, Shovel, Pick, Axe, Hammer, Screwdrivers, and Wrenches
Work performed: with little or no supervision as per verbal and written instructions; through constant physical exertion essential as needed to successfully complete assigned tasks; in inclement weather, nights, weekends & holidays and call-outs; during exposure to varying weather conditions: heat, cold & freezing temperatures; rain, wind, snow storms and blizzard conditions ; with constant exposure to injury; while adhering to OSHA, Agency, and Company Safety policies; Overnight and extended travel essential to performing job duties.
Supervisor: Tom Lopez 505-***-****)
Okay to contact this Supervisor: Yes
AS Horner Construction
6280 State Rd. 303 SE
Albuquerque, NM 87105 United States
06/2000 - 09/2006
Salary: 20.00 USD Per Hour
Hours per week: 45
Engineering Equipment Operator
Duties, Accomplishments and Related Skills:
Job Title: Engineering Equipment Operator
Engineering Heavy Equipment Operator of: 3500 and 7000 gallon Water Distributor Trucks; Tandem and Single-Axel Dump truck w/attachments; Crawler/Dozer; Loader; Blade; 5 and 10 yard Dump Trucks; Flow boy-tractor trailer; Transport Truck w/trailer; Rollers-Steel Wheel & Pneumatic; Mowers; Scraper; Pneumatic Tire-Tractor with cable-controlled power units; Drop Neck Trailer Transport.
Finish Blade. Process sub grade with a certain amount of water. Mix with blade until processed. When material is processed you should be able to squeeze material in your hand. It should stay together when let go, then roll with roller until it tightens up; Survey (Blue top). Cut to Blue tops, finish, take density, string line, sell, and then put in base course. Repeat process with Base course and sell finished product as quickly as possible.
Complete all sub grade and base course work for roads, interstate and highways, curb and gutter and parking lots. Run Dozers to dig retaining ponds and cut slopes. Run Loader to load trucks, stock pile and pickup winrows. Run Scraper to cut and fill roads and pickup winrows.
Blade work: On road shoulder improvement projects: Blade patching and Pot-Hole patching on asphalt roads; Cleaning out and cutting bar ditches and pulling shoulders; Building earthen banks; grading unpaved roads; Grubbing (clearing) vegetation; growth and debris; Prep and finish sub grade and base course for paving; Prepare all finish work; Operate Blades (motor graders) loaders, scrapers, dozer's and excavators.
Transport: Utilizing transport low boy and drop-neck trailer for heavy equipment transport; Utilizing flow-boy trucks to transport material to and from work sites.
Scraper: Utilization to scrape, haul and build fill roads.
Transporting heavy equipment to and from work sites: Stock piling of material and waste-material utilizing crawler and loader Earth and Debris Removal utilizing loader and dump trucks; Hauling debris & material to and from work site with dump trucks Concrete work.
Daily Preventative Maintenance of heavy equipment & trucks.
Utilize variety of hand-tools: Chain Saws, Jack-hammers, Hand Augers, Fence Stretchers, Post Drivers, Post Hole Digger, Hand Saw, Grinders, Shovel, Pick, Axe, Hammer, Screwdrivers, and Wrenches
Work performed: with little or no supervision as per verbal and written instructions; through constant physical exertion essential as needed to successfully complete assigned tasks; in inclement weather, nights, weekends & holidays and call-outs; during exposure to varying weather conditions: heat, cold & freezing temperatures; rain, wind, snow storms and blizzard conditions ; with constant exposure to injury; while adhering to OSHA, Agency, and Company Safety policies; Overnight and extended travel essential to performing job duties.
Supervisor: Marty Yalch 505-***-****)
Okay to contact this Supervisor: Yes
CS McCrossan Construction
Unavailable / No longer in Business
Las Cruces, NM 88001 United States
01/1992 - 06/2000
Salary: 16.00 USD Per Hour
Hours per week: 50
Heavy Equipment Operator
Duties, Accomplishments and Related Skills:
Engineering Heavy Equipment Operator of: 1750 gallon Asphalt Distributor Truck; 3500 and 7000 gallon Water Distributor Trucks; Production Milling machine with 7 foot drum and Conveyor; Tandem and SingleAxel Dump truck w/attachments; Crawler/Dozer; Loader; Blade; 5 and 10 yard Dump Trucks; Chip Spreader; Flow boy-tractor trailer; Transport Truck w/trailer; Lay-down Machine; Self-Propelled Broom;
Rollers-Steel Wheel & Pneumatic; Mowers; Scraper; Pneumatic Tire-Tractor with cable-controlled power units; Drop Neck Trailer Transport.
Asphalt Work: Operate 3900 Asphalt Truck; Layout design, raking and laying hot mix for pads, parking lots and pull-outs.
Blade work: On repaving and construction of highway and rural road projects; Blade patching and Pot-Hole patching on asphalt roads; Cleaning out and cutting bar ditches and pulling shoulders; Building earthen banks; Grading unpaved roads; Grubbing (clearing) vegetation, growth and debris; Prep and finish sub grade and base coarse for paving; Prepare all finish work; Operate Blades (motor graders) loaders, scrapers, dozer and excavators.
Lay down Machine: Laying asphalt to desired depth, slope and crown of straight shoulders and roads.
Milling Machine: Milling correct depths, monitoring drum milling tips and holders.
Transport: Utilizing transport low boy and drop-neck trailer for heavy equipment transport; Utilizing flow-boy trucks to transport material to and from work sites.
Scraper: Utilization to scrape, haul and build fill roads.
Transporting heavy equipment to and from work sites: Stock piling of material and waste-material utilizing crawler and loader Earth and Debris Removal utilizing loader and dump trucks; Hauling debris & material to and from work site with dump trucks.
Concrete work.
Daily Preventative Maintenance of heavy equipment & trucks.
Utilize variety of hand-tools: Chain Saws, Jack-hammers, Hand Augers, Fence Stretchers, Post Drivers, Post Hole Digger, Hand Saw, Grinders, Shovel, Pick, Axe, Hammer, Screwdrivers, and Wrenches
Work performed: with little or no supervision as per verbal and written instructions; through constant physical exertion essential as needed to successfully complete assigned tasks; in inclement weather, nights, weekends & holidays and call-outs; during exposure to varying weather conditions: heat, cold & freezing temperatures; rain, wind, snow storms and blizzard conditions; with constant exposure to injury; while adhering to OSHA and Company Safety policies; Overnight and extended travel essential to performing job duties.
Mountain State (Broce Construction)
3601 Pan American freeway NE 111
Albuquerque, NM 87107 United States
07/1980 - 12/1991
Salary: 14.00 USD Per Hour
Hours per week: 50
Equipment Operator / Truck Driver
Duties, Accomplishments and Related Skills:
Engineering Heavy Equipment Operator of: 1750 gallon Asphalt Distributor Truck; 3500 and 7000 gallon Water Distributor Trucks; Production Milling machine with 7 foot drum and Conveyor; Tandem and Single-Axel Dump truck w/attachments; Crawler/Dozer; Loader; Blade; 5 and 10 yard Dump Trucks; Chip Spreader; Flow boy-tractor trailer; Transport Truck w/trailer; Lay-down Machine; Rollers-Steel Wheel & Pneumatic; Mowers; Scraper; Pneumatic Tire-Tractor with cable-controlled power units; Drop Neck Trailer Transport.
Blade work: On road shoulder improvement projects; Blade patching and Pot-Hole patching on asphalt roads; Cleaning out and cutting bar ditches and pulling shoulders; Building earthen banks; grading unpaved roads; Grubbing (clearing) vegetation, growth and debris; Prep and finish sub grade and base course for paving; Prepare all finish work; Operate Blades (motor graders) loaders, scrapers, dozers and excavators.
Transporting heavy equipment to and from work sites: Stock piling of material and waste-material utilizing crawler and loader; Earth and Debris Removal utilizing loader and dump trucks; Hauling debris & material to and from work site with dump trucks.
Daily Preventative Maintenance of heavy equipment & trucks.
Maintaining service logs for heavy equipment and work trucks.
Work performed: with little or no supervision as per verbal and written instructions; through constant physical exertion essential as needed to successfully complete assigned tasks; in inclement weather, nights, weekends & holidays and call-outs; during exposure to varying weather conditions: heat, cold & freezing temperatures; rain, wind, snow storms and blizzard conditions; with constant exposure to injury; while adhering to OSHA and Company Safety policies; Overnight and extended travel essential to performing job duties.
Supervisor: Don Jinx 505-***-****)
Okay to
Contact this candidate