CURRICULAM VITAE
Name : PRAMOD.V.K.
Date of Birth : 04th May 1970.
Marital Status : Married.
Nationality : Indian.
Passport Details:
Number : Z-2120659.
Date of Issue : 08th July 2012.
Date of Expiry : 07th July 2022. Place of Issue : Riyadh.
Contact Number:
Mobile No. : +91-953*******
Mailing Address : Vattukulam House,
P.O. Mullassery,
Thrissur, Kerala – INDIA.
Phone: 0091- 487-***-****.
E-mail Address : **********@*****.***
Educational Qualification : Intermediate from Calicut University
Technical Qualification : Diploma in Mechanical Engineering, Govt. of Kerala, India.
: Sr. Welding Insp.(CSWIP-3.2.2) )(315107)
ASNT Level II Certification in
1) Ultrasonic Test (UT)
2) Magnetic particle Test (MT)
3) Liquid Penetration Test (PT)
4) Radiographic Test (RT)
QMS Lead Auditor IRCA Approved BSI Certificate (EN ISO 9001: 2008)
(Certificate No: QMS 041-****-****).
Saudi Aramco approved QC Supervisor (Piping & Welding).
(Aramco SAP No:70019909)
Saudi Aramco approved QC Inspector (Piping & Welding).
KNPC approved QC Inspector (Piping/Welding/NDE).
Total Experience : 26 Years (9Years in India & 17 Years
Abroad) in Piping & Welding.
Languages Known : English, Hindi, Tamil & Malayalam.
Professional Experience
M/s. JGC Corporation, Kuwait.
Position : Pip/Welding NDE QC Lead Inspector.
Period : 25th July 2018 to 30th Oct 2018.
Client : KNPC, CFP Project.
M/s. Bureau Veritas, Oman.
Position : QC Inspection Engineer.
Period : 15thNov 2017 to 21st Feb 2018.
Client : Sohar Aluminium.
M/s. SK Engineering & Construction,KS.A (EPC Contractor)
Position : QC Piping/Welding Supervisor.
Period : 19th Jan 2012 to 30th Jan 2016
Project : Wasit Gas Project.
Client : Saudi Aramco.
Responsibilities
Coordinate inspection activities with sub- contractor & client to attain quality objectives as per quality assurance plan of the project.
Assigning & Monitoring quality personnel in proper areas as per requirements.
Review of subcontractor’s welding procedure specifications (WPS), procedure qualification record (PQR), and welder qualification test (WQT).
Review of Non destructive tests such as Radiographic test (RT), Ultrasonic test (UT), Penetrate test (PT) and Magnetic particle inspection (MPI)& all other Reports
Assist QCM in all quality related issues.
Monitoring of the QA / QC documentation of the subcontractors and ensure that all activities are incorporated to their system on daily basis and can be traced
according to project requirement.
Handling of NCR’S suggesting prompt corrective, preventive action & root cause analysis.
Monitor welds repair rate, RFI rejection rate & other violations.
Submit weekly welding reports to client.
Coordinating quality audits (Internal & External) with various independent organizations.
M/s. FISIA ITALIAMPIANTI (EPC Contractor), QATAR.
(GRUPPO IMPREGELLO.)
Position : QC Piping Welding Inspector.
Period : 28.10.2008 to 30.11.2011
Project : Power & Desalination Plant
Client : Qatar Electric & Water Company.
Responsibilities
Ensure the quality of the work is as per Inspection & test plan of the project by performing field inspection.
Assuring implementations of code, standard, and specification.
Conducting quality meetings for awareness of sequence & requirements of inspection activities.
Inspection of Piping & mechanical activities in the various stages of construction like material receiving, fabrication, welding, erection, Testing & commissioning as per the drawings and specification & standards.
Review of Material Test Certificate.
Conducting receiving inspections of Pipes, Fittings & Structural steel shapes as per project specification.
Conduct consumable receiving inspection.
Conducting joint fit-up inspection & weld visual Inspection.
Controlling of welding parameter as per WPS.
NDT follow up as per test plan.
Raising NCR’s to concerned dept. or subcontractor’s as and when required.
Conducting close out inspection of NCR’s.
Co-ordination with client QC Inspection personnel’s.
Submission of QC progress report to QC Manger / Supervisor.
Review of subcontractors work procedures.
Review of Hydro test Packages and submission for client approval.
Preparing of pre-punch list and final punch list.
Witnessing of hydro and pneumatic testing.
Witnessing of field hydro testing of Valves.
Test Pack compiling and submission to client for final approval.
Witnessing of pre-commissioning activities
M/s. Chiyoda Technip Joint Venture (CTJV), EPC Contractor, Qatar.
Position : Piping Inspector.
Period : 26.12.2005 to 31.05.2008.
Project : LNG Project.
Client : Qatar Gas-2 Expansion (QGX).
Responsibilities
Ensure the quality of the work is as per quality assurance plan of the project by performing field inspection.
Review and comment on materials, procedures, ITPS, method statements.
Ensure technical & Quality aspect of Engineering works to meet project requirement.
Ensure Materials are in good Condition & can be traced to a test certificate.
Conduct dimensional Survey to confirm the dimensions are in accordance with drawing /Code.
Review of test packages and line check for piping and punching out the lines before Hydro test.
Monitor company punch & close the same.
Witnessing Pressure test and reinstallation.
Witnessing of Bolt tightening (Torque test).
Chiyoda -Foster wheeler (CFW) LLC, (EPC Contractor),Oman.
Position : Piping Supervisor-Line Checker.
Period : 17.04.2004 to 30.10.2005
Client : Oman LNG Project,Sur.
Responsibilities
Assuring implementations of code, standard, and specification.
Inspection activities in the various stages of construction like, material receiving, fabrication, welding, erection, Testing & Pre commissioning as per the drawings and specification & standards.
Review of Material Test Certificates
Raising NCR’s to concerned dept. or subcontractor’s as and when required.
Co-ordination with client QC Inspection personnel’s.
Review of Hydro test Packages and submission for client approval.
Witnessing Pressure test and reinstallation.
Witnessing of pre-commissioning activities.
Carry out Quality audits with Sub Contractor Engineers.
M/s. MID EAST CONSTRUCTORS (MECON),QATAR.
Position : Piping Supervisor.
Period : 25.01.1998 to 15.11.2003
Client : Qatar Petroleum & Qatar gas
Worked in NGL-4 Project at Dukhan in Qatar, Under Supervision of SNAMPROGETTI-HYUNDAI JOINT VENTURE (July 2000- Nov 2003)
for Qatar Petroleum (QP).
Worked With QXY Petroleum for QP Off Shore Project (PS-1) (Piping Fabrication Works- 7 months)
Worked in QATARGAS Maintenance shutdown at Train 1 & Train 2 (Sept.1999-Nov.1999)
Worked in DUKHAN CONSOLIDATED FACILITIES UPGRADE PROJECT (DCFUP-CC6) in Qatar around six months under supervision of “PETROFAC LTD” (March 1999-Sep.1999) for Qatar General Petroleum Corporation (QGPC)
Worked in DUKHAN CONSOLIDATED FACILITIES UPGRADE PROJECT (DCFUP-CC4) in Qatar around one year under supervision of “COSTAIN” (January 1998-March 1999) for QGPC.
Responsibilities
Material follow-up for continuous supply & smooth Fabrication & Erection.
Allocate Manpower & Machinery for Various works as per Planning Schedule
Direct Supervision of all Piping works.
Dimension Control of Pre welded & Post Welded Piping Spools.
Prepare Fit-Up Reports, Line History Sheet & Other Testimonial Reports.
Submission of Daily Work report to Head of Department.
Preparation of As-Built records
Worked as “Mechanical Engineer Gr. II” with G.D.C. Ltd, India.
Period : 01-01-1997 to 22-01-1998
Client : Reliance Industries Ltd., Hazira, India.
Worked as “Junior Engineer Gr. I” with G.D.C. Ltd, India.
Period : 01-07-1994 to 31-12-1996
Client : Reliance Industries Ltd., Hazira, India.
Worked as “Site Engineer” with United Erectors (P) Ltd, India.
Period : 01-09-1992 to 30-06-1994
Client : Manikgarh Thermal Power Plant, Chandrapur, India.
Worked as “Trainee Engineer” with United Erectors (P) Ltd, India.
Period : 01-10-1991 to 31-08-1992
Client : Ramapetrochemical, Pathalaganga, India.
Responsibilities
Estimate Quantity of material.
Preparation of weld map & Spooling ISO. for fabrication.
Prepare Manpower Schedule & Distribute the same for various assignments.
Prepare daily activities &Equipments to be used.
Perform site queries & execute the same.
Prepare Daily & Weekly Work Progress Reports.
Preparation of As-Built Drawings.
Other Informations.
Aramco Approved QC Supervisor-Piping/Welding (SAP No:70019909)
Aramco Approved QC Piping Welding Inspector.
Worked in oil, Gas, Petrochemical & Chemical Projects.
Provide Technical Expertise & Support on matters Related to the procedure, specification, & project standards.
Have through Knowledge in Plot Plans, P&ID & Isometric Drawings.
Knowledge in Auto CAD.
Knowledge in PDS (Smart Plant Review).
Flexible to cover other discipline activities if required, work as a team member with multi culture / national personnel.