Sign in

Architectural Engineer

Fujairah, Fujairah, United Arab Emirates
June 19, 2019

Contact this candidate



(Registered Architect)

Nationality: Filipino

Current Location: Room 305, Majellan Bldg. Airport Road, Fujairah, UAE

Permanent Address: KM. 97, Concepcion Batangas City, Philippines, 4200

Mobile: +971********* / +971*********



Registered Architect

Career Service Eligible : First Grade, Professional

Work experience in Design, Planning, Management, Consultancy, Construction, Estimating, Scheduling and Documentation.

Completed PMP Facilitation Study Program and with OSHA Training (U.S.A).

Proficient in hand sketching, drafting and with knowledge & training in different Architectural and Engineering software.

2-Time Aecom Safety Star Award recipient.

Excellent communication and interpersonal skills in English.

Hardworking, flexible, quick learner and enthusiastic team player.


Plan Review and Approval (from IFC, Shop Drawing, Red-line and As-built Drawing)

Technical Review and Documentation (Technical Specification, Bill of Quantities, Technical Queries (TQ)and Request for Information, Contractors Pre-qualification Document Submittal and Review on Contractors Billing

Material Review, Inspection, Selection and Approval (Material Samples and Mock-up, Material Test Reports, Factory / Fabrication Inspection (different levels of Inspection from fabrication to delivery).

Client to PMC and PMC to Contractor Coordination.

Construction Supervision and Implementation.

Project QA/QC and Inspection / Evaluation.


I. AECOM Middle East Limited

Design, Consulting, Construction and Management Services

Ubora Tower, Level 43, Al Abraj St., Business Bay, Dubai, United Arab Emitates

Tel: +971-**-***-****

July 22, 2018 - Present

Position: Site Architectural Engineer

Work performed:

Project Management and Engineering Supervision for Mohamed Bin Zayed City Housing Project in Fujairah, United Arab Emirates.

Specific Duties & Responsibilities:

Attends to daily inspections and ensure all activities on Site shall be done per approved Shop Drawing, Project Technical Specifications, Method Statement and Contract Requirements.

Check and review Shop Drawing, Method Statement and Material Submittal. Monitor work progress in Site; ensuring work done is in-line with Project baseline program.

Provides inspection for snag listing / close-out prior to Project Hand-over.

Ensure Quality of Work (QA/QC) was done on Site. Check and monitor activities on Site and Coordinate with Aecom Team and Contractor to avoid delay and ensure work to be done per target completion date.

Issues Non Compliance Report for violation and non-conformance on Site.

Implement Aecom Preserving Principles, approved SHE Site Plan, Method Statement / Risk Assessment and reports to Lifeguard prior to safety issues at Site.


Management, Engineering and Consulting Services

Dammam, Kingdom of Saudi Arabia

Tel: +966-**-*******

December 08, 2013 - July 09, 2017

Position: Senior Architect / Senior Architectural Engineer

Work performed:

Project Management and Engineering Supervision for Marafiq Project in Jalmudah District, Kingdom of Saudi Arabia.

Specific Duties & Responsibilities:

Review and provides approval for Contractors Technical Submittals including Shop Drawings, Material Samples and Approval Sheets, Method Statements, Inspection &Test Plan and Manual including Site Development: Hardscape and Softscape.

Attends to Progress and Procurement Meeting as Clients Representative for Architectural Work and Activities for project implementation

Conducts “walk-through” with the Client for Project Development.

Conducts Technical Meeting with the Contractor to ensure proper coordination and project implementation (Contractually).

Responsible for responding to all Technical Queries (TQ), Site Clarification (SCR), Request for Information (RFI), Redline and Field Adjustment (FA) received from Contractors at the Site.

Check, Review, Verify and provides Approval to Contractors Daily Progress Report and Material Transmittal for Royal Commission Selection and Approval.

Quality Checking and Inspection of Mock-up and Fit-out before proceeding to fabrication.

Conducts and provides Approval per Showroom, Factory and Workshop Inspection for Material Quality Compliance and Vendor (Manufacturer/Supplier) per Specification requirements.

Evaluate the project construction to ensure compliance with Marafiq and Royal Commission Standards and Project Technical Specification.

Coordinating with Clients and Contractor on the project on technical matters related to Inspection of Architectural works including Landscaping (Softscape and Hardscape).

Provides approval for “Redline” and “as-built plan”.

Managing the Architectural works for conformance with the provisions of the contract documents and the Project Technical Specification

Responsible for Project Turn-over prior to documentation and acceptance.


Engineering Design & Technical Consultant

King AbdulAziz Street / 12th Cross, P.O. Box: 1713, Al Khobar 31952, Saudi Arabia

Tel: +966*-******* / Fax: +966*-*******

December 20, 2011 – July 09, 2013

Position: Project Architect

Project Undertaken:

General Engineering Services for Construction of Senior & Junior Bachelor Quarters, Aviation Building, Material Transport Department Building & 5 School Building (Boys Intermediate and Elementary School, Girls Intermediate, Elementary and Kindergarten School)

Khafji Joint Operation (Kuwait Oil Company/Aramco Gulf Oil Company), Al khafji, Saudi Arabia

Specific Duties & Responsibilities:

Review of Contractors technical submittals and approvals processes, including shop drawings, Materials Approval Sheets (MAS), Method Statements, Inspection &Test Plan and Manuals

Responsible for responding to all Technical Queries (TQ), Site Clarification (SCR), Request for Information (RFI) and Field Adjustment (FA) received from Contractors at the site.

Responsible for interpretation of all Technical Documents issued by the Engineering Design Office and conducting inspection related to Architectural and Site Development Works including Landscaping (Hardscape and Softscape).

Responsible for the review, approval and selection of materials (Architectural) per Project Technical Specification, ARAMCO standards and other related standards.

Evaluate the project construction to ensure compliance with standards and PTS.

Provide technical assistance to the construction team as needed

Coordinating with Client, Project Management Consultants and Contractor on the project on technical matters related to Architectural works.

Monitoring the Architectural works for conformance with the provisions of the contract documents and the Project Technical Specification.

Managing the Quality Assurance/Quality Control Architectural Inspectors.

Attend Factory Acceptance Test (Level 1 & Level 2 Inspection) of all Architectural related Materials and Accessories.

Responsible for Approval of As-Built Drawings and documents submitted by Contractors at the end of Construction.

Signing off on completed Architectural works with completed documentation.

Perform all other duties given by Senior Construction Manager.

Provides inspection for Mock-up and Fit-out before going to presentation with Client subject for Final Approval.


KM. 97, Concepcion, Batangas City, Philippines, 4200

November 04, 2009– November 30, 2011

Position: Project Architect / Technical Manager (Private Practitioner)

Specific Duties & Responsibilities:

Manage the preparation of Design Proposals, Estimates, Schedules and preparation of Construction Activities.

Coordinate with the Client and Sub-contractors regarding material proposal, selection and approval.

General Supervision at site to ensure proper implementation of design for execution.

Manage and check document and work being performed by subordinates.

Provide technical assistance to the construction team as needed.

Plan, review, and coordinate design and construction operations to ensure compliance with design drawings and specifications.



P.O. Box 23085 G.M.F., Guam 96921, USA

November 02, 2008 – September 30, 2009

Position: Architect / Estimator

Project Undertaken:

Andersen Air force Base Facilities – United States Air force (SABER Projects), Guam, USA

Specific Duties & Responsibilities:

Provides General Supervision of Project for Construction and implementation (Interprets plan and provide instruction to Construction Supervisor and Foreman for Project execution).

Ensures Quality Assurance for the Project.

Prepares and Reviews Architectural Plans with regards to Scope of Work (SOW).

Prepares Project Proposal, Detailed Cost Estimate and Submittal Drawings.

Mobilize the materials/ equipment needed for the project.

Monitor, verify and document the work being performed by subordinates.

Coordinate with other engineering discipline and provide technical assistance to the construction team.

Generate/Review material requisitions, submittals and ensure contract performance measures are met.

Does Manpower and Work Schedule

Coordinate with CE regarding Change of Work & Accomplishment Report.

Attend Pre-bid, Pre-conference, Safety Meetings (Tool-box) and other related construction activities

Assist the Project Manager in ensuring completion of the project per schedule within budget, in accordance with quality standards.

Plan, review and coordinate design and construction operations to ensure compliance with design drawings and specifications.

Prepares As-built drawings.


P.O. Box 22453, Doha, Qatar

April 04, 2008– October 26, 2008

Position: Architect / Architectural Engineer

Projects Undertaken:

P-99-Diwan Amiri : – (MINUS)13.75 Meter Underground Car Park and Utility Building.

Specific Duties & Responsibilities:

Does Architect and Site Architectural Engineer’s work and inspection.

Check and Review CAD Operators Shop Drawing and provide Design Proposals with respect to IFC to be submitted to Project Consultant for approval

Reviews Plan with regards Bill of Quantities (BOQ) and Specification.

Prepares Method Statement to be submitted to the Consultants.

Reviews Daily Report -DR (Daily Accomplishment) prepared by the Site Engineer before being submitted to the Design Consultant.

Raised Request for Information (RFI’s) and other queries in Contract Drawing with discrepancy on Bill of Quantities (BOQ) and Project Technical Specification (PTS).

Coordinates with the Materials Engineer and Consultants regarding materials submittal for Architectural Finishes and Schedules.

Review Mock-up and Fit-out Samples done by the Sub-contractor, providing recommendation for approval to the Management and supervise fit-out work for the Management (in-house construction).


P. Burgos St., Batangas City, Philippines, 4200

October 1, 1993 - March 31, 2008

Position: Project Development Officer III (Urban Planner)

Job Profile:

Prepares Plan and Detailed Drawings for the Proposed Development Projects.

Makes Project Proposal and Research design for inclusion on Annual investment Plan.

Responsible for the updating on the Ten-Year Development Plan..

Makes progress reports on all on-going Batangas City Government Projects.

Provides Inspection and Evaluation of On-going Projects for Progress evaluation.

Bids and Awards Committee (BAC-Secretariat)

oMember Technical Working Group

oProvides assistance to the BAC Chairman during Pre-Bid, Bidding and other related Conferences for the City of Batangas, Philippines

oReview Technical / Financial Statement of Contractors prior to Pre-Qualification.

oReview Bids, Envelope 1 and 2 (Bid Bond, Bid Amount, Detailed Cost Estimates, Bill of Quantities, Manpower/Equipment Utilization Schedule, Bar Chart, PERT/CPM, S-Curve and other related documents) for Prospective Bidders.

oCoordinate with the implementing agency and concerned agencies (City Engineers Office, Office of the City Accountant, Office of the City Treasurer and Office of the City Auditor) prior to Request of Allocation and Award of Bidded Projects.

Projects Involved:

-Batangas City Sports Complex (Cuta, Batangas City)

-EBD Sports Coliseum, (BCSC)

-Plaza Mabini Park Development (Batangas City)

-Integrated Transport Terminal (Bolbok, Batangas City)

-Batangas City Public Market (Cuta, Batangas City)

-Teachers Conference Center (P. Herrera St., Batangas City)

-Office of the City Veterinary Building (Bolbok, Batangas City)

-Batangas City Slaughter House, Perry (Batangas City)

-Batangas City Fire Station, (City Hall Compound)

-City Health Office (Barangays, Batangas City)


P. Canlapan St., Batangas City, Philippines, 4200

May 16, 2000 – December 2006

Position: Project Architect (Private Practitioner)

Specific Duties & Responsibilities:

Prepares Bidding Documents (Detailed Cost Estimate, Manpower Schedule, Equipment Utilization Schedule, Cash Flow by Quarter, Bar Chart, Construction Schedule, S-Curve and other Bidding Documents).

Provides supervision for Draftsmen and Clerk at work.

Represent the owner regarding Pre-bid, Bidding and Pre/Post-construction Conferences.

Does Interior Design and Design Drawings.

Reviews Shop drawings, proposal drawings and as-built drawings.

Supervised : Mock-up, Fit-out, Sample for Client approval.

Projects Undertaken:

-SanIsidro Village Housing Projects, Barangay San Isidro, Batangas City

-Uniworld Travel Satellite Offices (Batangas City and Lipa City Offices)

-Local Government Projects of Batangas City (Barangay Projects)

-Golden Gate General Hospital (Repair / Improvement), P. Prieto St., Batangas City.

-Metro Rail Station ( LRT Central and UN Station) Manila)

-Maria Uy, 5-Sorey Residential – Commercilal Building, Cuta, Batangas City.

Scope of Work:

Managing / Supervision / Implementation / Inspection

Planning / Organizing

Estimating and Scheduling

Interpreting Plans and Layout

Quality Control & Quality Assurance

Interior Design and Decorating

oMiniture / Model Making

oMock-up / Fit-out

oSampling / Rendering


P.Herrera St., Batangas City, Philippines, 4200

November 22, 1988 – September 30, 1993

Position: Engineering Assistant (CE Aide) / Architectural Inspector

Job Profile:

Prepares Detailed Cost Estimate, Specification and Program of Works.

Inspects on-going projects as per plan, material and construction procedures per compliance with Project Technical Specification

Draws Shop and Detailed Drawings (Government Buildings).

oEBD Type School Buildings (Schools, Home Economics, Industrial, School Canteen, Stages)

oHealth Centers

oMulti-purpose Building

oBatangas City Sports Complex

oDon Julian Pastor Public Market- ESF Funded-US ECONOMIC SUPPORT FUND

oBoy Scout of the Philippines Building, Batangas City

oOffice of the Sanguniang Panlungsod (Legislation Building)


College Course: Bachelor of Science in Architecture

Adamson University, Manila, Philippines, (1983-1988)


Nationality : Filipino Date of Birth : April 11, 1967

Gender : Male Civil Status : Married

Language : English & Tagalog

References available on request.

I understand and confirm that the information provided in this application is true, accurate and correct to the best of my knowledge and belief.

Arch. Edwin Aguila Maullon


Contact this candidate