Resume

Sign in

Mechanical Engineer Project

Location:
Rawdat Al Khail, Qatar
Posted:
June 18, 2019

Contact this candidate

Resume:

* ** *

Orlan Lanayon Zamora

Permanent Address : Villa No. 6, Al Kayaren Garden,

Al Gharaffa, Doha, Qatar

Contact No. (Qatar) : +974-********

(Home) : +63-921*******

E-mail Address : ac9m3m@r.postjobfree.com

Mechanical Engineer

Has eighteen (18) years of working experience in the field of mechanical engineering works. A licensed Mechanical Engineer exposed primarily in design, technical specifications, evaluation, estimate and supervise mechanical activities related engineering, construction and maintenance of Heating and Ventilating Air Conditioning (HVAC), Fire Fighting, Plumbing/Drainage system and Domestic hot and cold water supply for residential, high rise, commercial and industrial buildings. Advanced Skills and Experience

Project Management

Cost Estimates

Design and Technical Specifications

Project Supervision

Report Preparation

Written Correspondence

Tender Documents Preparation

Operation and Maintenance

Educational Attainment

Bachelor of Science in Mechanical Engineering (BSME) Notre Dame University

Cotabato City, Philippines

Graduated Class of 2000

Professional Status

Professional : Mechanical Engineer Registration No. 63506 2004 Registration

Professional Development

Training and :

Certificates

Testing & Maintenance of Emergency Gensets, Chillers and Chillers Accessories-GBF Technical Center Litton Mills Pasig City, Philippines 2004 Basic Refrigeration and Airconditioning - GBF Technical Center Litton Mills Pasig City, Philippines 2003

PERT - CPM and Network Analysis - GBF Technical Center Litton Mills Pasig City, Philippines 2003

Centrifugal Pumps - GBF Technical Center Litton Mills Pasig City, Philippines 2003

Fire Spread Prevention & Supports Stress Analysis – Plaza Inn Doha Doha, Qatar 2015

Building Services – HVAC Design – Plaza Inn Doha

Doha, Qatar 2015

Chilled Water System Design – Auditorium of QBA, Al Khail Muntaza, Doha, Qatar 2015

NFPA 13 Application – Rotana City Center, Doha Qatar 2018 Safe Design in Oil and Gas HVAC System – Rotana City Center, Doha, Qatar 2018

2 of 6

Work Experiences

October 2014 – April 30, 2019

Advanced Engineering & Maintenance Company (AEMC) - P.O. Box 22850, 3rd Floor, Office No.14, Al Mana Business Center, Amir Road, Al Soudan, Doha, Qatar. Description of the company – It is a Grade A Mechanical, Electrical, Plumbing and Fire Fighting

(MEPF) Contracting company in Doha Qatar which is an ISO 9001-ISO14001-OHSAS18001 certified and U.S. Green Building Council Member. It is involves in design and construction of Refrigeration, Air Conditioning, Ventilation, Electrical, Plumbing and Drainage system for residential, commercial and industrial building. It is Al Mana Group of Companies member. Position: Mechanical Engineer

1. Name of Project : 2B+G+P+21 Floors Marina Residential Tower at Lusail City Owner : Mr. Mohammed Hamad Al Mana

2. Name of Project : 2B+G+2 Floors Al Mana Headquarters, Salwa Road Owner : Mr. Mohammed Hamad Al Mana

Duties and Responsibilities

Monitor/supervise the progress and development of the mechanical works (HVAC, Plumbing/Drainage and Fire Fighting) of the above projects in accordance with the standard and authorities requirements (QCDD).

Attend the meeting together with the other trades, main contractor and consultants for the status of the project.

Provide technical resolution during execution and construction phase of the project.

Coordinate with the other trade/discipline for the project implementation accuracy.

Prepare work methodology in relation with approved standard and safety procedures.

Prepare Inspection checklist and test plans as per approved standard testing procedures for all mechanical works with standard format for data result.

Submit a technical query to the consultant for all details with conflict to approved specification and standards, and in conflict with design in relation to other discipline.

Prepare/review the material submittal in relation with the Qatar Construction Standard

(QCS) before submit to the consultant for the approval.

Contribute to the management of change process in terms of engineering reviews and potential changes and variation order.

QA/QC to ensure that the quality of the drawings and works implemented to site are according to Qatar construction standard (QCS), project specification and other mechanical engineering standard before the inspection request (IR) submitted to the consultant for inspection/approval.

December 2011 – August 2014

Gaborone Electronics (Pty) Ltd. – Plot 101, Unit 11 & 12, Gaborone International Commerce Park, Private Bag 00425, Gaborone, Botswana.

Description of the company – It is a Grade A Mechanical and Electrical Engineering Contracting Company with limited liability. It is involved in project design, construction and maintenance of mechanical services, Freezer & Cold rooms. Supply and installation of laundry and kitchen equipment for government and private investors in the following various fields: Hospitals, Shopping Center, Complexes, Hotels, Residential and Schools. Position: Mechanical Engineer

1. Name of Project : CA Sales Ware House Building – 800m2 Cold & Freezer room installation. Owner : Private Investor

2. Name of Project : UBAH – University of Botswana Academic Hospital 450 Bed Capacity – Cold and freezer rooms, laundry and kitchen equipment installation. Owner : Government of Botswana.

3 of 6

3. Name of Project : First National Bank (FNB) – Cold & Freezer room and Kitchen Equipment Owner : Private Investor

4. Name of Project : All Kentucky Fried Chicken (KFC) in Botswana – Designed of Ventilation & Airconditioning system

Owner : Private Investor.

5. Name of Project : Al Nando’s Restaurant in Botswana – Designed of Ventilation and Airconditioning system

Owner : Private Investor.

6. Name of Project : Diesel Boiler & Kitchen equipment Installation for Botswana Defense Force. Owner : Government of Botswana

Duties and Responsibilities:

Attend the meeting together with the other trades, client and consultants for the status of the project.

Checked the design and equipment selection for freezer & cold rooms.

Checked the technical specification of freezer & cold room before submitting to the client.

Evaluate the equipment cost for escalation due to fluctuation of the exchange rate.

Participate in the procurement process through the evaluation of technical submissions.

Monitor/supervise the progress and development of the above projects.

Design and supervision of HVAC system and all the mechanical works for KFC projects.

Budget estimate of all the mechanical works/project.

Design and supervision of HVAC system and all the mechanical works for Nando’s projects.

QA/QC to ensure that the quality of the drawings and works implemented to site are according to Project specification and other mechanical engineering standard before the inspection request (IR) submitted to the consultant for inspection/approval. September 2009 – November 2011

AF SANDILANDS & SONS – Postnet Kgale Suite 165 Private Bag 351, Gaborone, Botswana Description of the company – It is a Grade A Mechanical Engineering Contracting Company registered with limited liability. It is involved in project design and construction of mechanical, plumbing and solar water heating services for government and private investors in the following various fields: Hospitals, Shopping Center, Complexes, Hotels, Residential and Schools. Position: Mechanical Engineer

1. Name of Project : Lobatse Sports Complex Botswana - Sports hall & Pavilion Building. Owner : Government of Botswana

2. Name of Project : C.A. Sales – Ware House Building Owner : Private Investor

3. Name of Project : Abattoir Tswana Pride- Installation of Boiler equipment, Ventilation & Air Conditioning System.

Owner : Private Investor

4. Name of Project : University of Botswana Academic Hospital 450 Bed Capacity – Firefighting

(Sprinkler) Hot & Cold water Services

Owner : Government of Botswana.

Duties and Responsibilities:

Attend the meeting together with the other trades, client and consultants for the status of the project.

Monitor/supervise the progress and development of the above projects.

Contribute to the management of change process in terms of engineering reviews and potential changes and variation order.

Participate in the procurement process through the evaluation of technical submissions.

Provide technical resolution during execution and construction phase of the project.

Monitor progress of the development of mechanical equipment, piping engineering design deliverables and propose corrective actions in the event of potential schedule overrun.

Undertake inspections of equipment at various stages of its manufacture, as required. 4 of 6

Supervised and Checked AutoCAD draftsman output/shop drawings before submitting to the client.

Coordinate with the other trade/discipline for the design and plan accuracy.

Identifies design requirements for HVAC system and construction project.

Prepare Heat load calculation and equipment selection using software.

QA/QC to ensure that the quality of the drawings and works implemented to site are according to Project specification and other mechanical engineering standard before the inspection request (IR) submitted to the consultant for inspection/approval. February 2008 – September 2009

EMC Consulting Engineers (Pty) Ltd. – Plot 61687 Mabelleapude Road, Block 3, Private Bag 313 Gaborone, Botswana.

Description of the company – It is an engineering and consulting firm registered with limited liability. It is involved in project design, consultancies and project management related to mechanical, electrical, civil and structural services for government and private investors in the following various fields: Hospitals, Shopping Center, Complexes, Hotels, Residential and Schools. Position: Mechanical Design Engineer

1. Name of Project : Athlone Hospital in Lobatse Botswana - 250 Bed Capacities Owner : Government of Botswana

2. Name of Project : Ministry of Local Government (MLG) 3-Storey Building

(Offices & Meeting room)

Owner : Government of Botswana

3. Name of Project : Ministry of Agriculture in Serowe Botswana 2-Storey Building (Offices, Conference Hall, Laboratory, Ware house, Post mortem and Incinerator House)

Owner : Government of Botswana

Duties and Responsibilities

Prepare design and tender drawings for Heating and Ventilating Airconditioning System

(HVAC) including tender specifications, codes and standards for mechanical engineering practice.

Prepare Heat load calculation and equipment selection using software.

Prepare calculation for chilled and hot water system including radiators coil for the projects.

Supervised and Checked AutoCAD draftsman output drawings before submitting to the client.

Coordinate with the other trade/discipline for the design and plan accuracy.

Identifies design requirements for HVAC system and construction project.

Attend meeting together with the other trades, client and consultant for the status and updates of design drawings.

July 2005 – July 2007

Arabian Air Conditioning Contracting (AAC) - P.O. Box 40688, Al-Rawdha, Complex Salwa Road, DOHA State of Qatar.

Description of the company – It is a Grade A Mechanical, Electrical and Plumbing (MEPD) Contracting company in Doha Qatar which is an ISO 9001:2000 certified. It is involves in design and construction of Refrigeration, Air Conditioning, Ventilation, Electrical, Plumbing and Drainage system for residential, commercial and industrial building. It is owned by Al Malki Group of Companies.

Position: Assistant HVAC Design Engineer

2. Name of Project : 4-40 Storeys Al Dafna Residential/Commercial Towers at West Bay Owner : SHK. Thani Bin Abdullah Al Thani

3. Name of Project : Airconditioning and Ventilation System) for Qatar Petroleum Project 5 of 6

4. Name of Project : (50 Sub-station) Qatar power Transmission System expansion, air conditioning & Ventilation System

Owner : KAHRAMAA (Qatar General electricity & Qatar Corporation) 5. Name of Project : The Pearl Qatar (Porto Arabia) Residential Towers at Pearl Island (Parcel 1C, Parcel 2A, Parcel 7A, Town House and Retail Area) Owner : Al Fardan Real Estate Company

Duties and Responsibilities

Reporting to Senior Mechanical Design Engineer for the final checking and approval of the design/shop drawings.

Design and Review Heating and Ventilating Arconditioning System (HVAC) that includes engineering codes and standards for mechanical engineering practice.

Prepare shop drawing with value engineering and site inspection.

Supervise and Check AutoCAD Draftsman drawing before submitting to the client/consultant.

Coordinate with the other trade/discipline for the design and plan accuracy.

Identifies design requirements for HVAC system and construction project.

Attend meeting together with the other trades, client and consultant for the status and updates of design drawings.

March 2001 – July 2005

Westpoint Industrial Mills Corp. – Corporate Project Group – Basement 1, Corporate Project Engineering Department, Park Avenue, Robinsons Galleria Corner Ortigas, Edsa Quezon City Philippines.

Description of the Company – is an engineering company involved in project design, project management, feasibility study, project evaluation/implementation and maintenance. It is owned by the Gokongwei group of companies known as JG Summit Holdings Inc., one of the leading companies in the Philippines engaged in food manufacturing, textile, telecommunication, power generation, real estate, high rise and commercial buildings, airlines, petrochemical and etc. November 2004 – July 2005

Position: Head Mechanical Section

Duties and Responsibilities:

Supervised Project Engineers/Inspectors, per section. Assist and verified the output of the Project Engineers/Inspectors.

Supervised/Reviewed, design system and procedure of all Mechanical works involve in HVAC system.

Reviewed and approved Mechanical drawings and documents.

Reviewed and verified the evaluation and accomplishment reports of the Project Engineers/Inspectors.

Leads group technical discussion/meeting on engineering concerned.

Checked the inspection reports of the Project Engineers/Inspectors. June 2004 – November 2004

Project Engineer/Inspector

Duties and Responsibilities

Responsible for project inspection of all on-going Mechanical works and mechanical equipment such as Air Handling Unit, Fan Coil Unit, exhaust and fresh air blower, chillers and cooling tower for mall, department store and supermarket and make a report.

Responsible for Mechanical equipment installation, tapping, energize, testing and commissioning, including the operation and preventive/corrective maintenance program.

Prepare documents for preventive and corrective maintenance for Robinsons Department Store, Robinsons Supermarket, Robinsons Handyman and Do It Best Hardware. 6 of 6

Responsible for the safe and efficient operation of the equipment in the building.

Initiates actions for improvement of facilities in the building to maximize efficiency.

QA/QC to ensure that the quality of the drawings and works implemented to site are according to Project specification and other mechanical engineering standard. March 2001 – May 2004

Robinsons Land Corporation

Basement 1, Corporate Project Engineering. Dept.

Galleria Corporate Center, Corner Edsa Ortigas

Quezon City, Philippines.

Project Mechanical Staff Engineer

Duties and Responsibilities

Prepare documents for preventive and corrective maintenance for Robinsons Department Store, Robinsons Supermarket, Robinsons Handyman and Do It Best Hardware.

Checked the status of all engineering equipment and facilities on a daily basis.

Monitoring equipment performance and condition.

Design, estimate air conditioning and exhaust system including all mechanical works involved in HVAC.

Prepare scope of works and bid documents for mechanical works, evaluate work content material required and familiarize with contract documents, specification, unit rate and lump sum contract.

Review the final chosen design in details including technical documentation, detailed drawing, bidding evaluation-specifying workmanship expected.

Supervision and monitor all projects and prepare evaluation report and works scope accomplishments.

Computer Skills

Microsoft Office that includes Word, Excel, Power Point Presentation and MS Project

Computer Aided Design and Drafting (AutoCAD 2018)

Software for Air conditioning and Ventilation System. Personal Information

Languages : English – Proficient, written and oral Pilipino – Mother tongue

Nationality : Filipino

Civil Status : Married

Date of Birth : May 10, 1978

Passport No. : P0555828A

Valid Until : 07 October 2021

Visa Status : Transferrable



Contact this candidate