Manager Engineering
Resume:
May ****
HR Manager
Human Resources Department
Dear Sir/ Madam,
I’m currently working in Unicorp International Contracting Company (W.L.L.) here in Qatar where I was given the responsibility as a CAD Technician under infrastructure / Underground Utilities Projects. At present I have total of 14 years experiences under the field of Engineering Design, infrastructure/ underground utilities (Roads, Piping and Electrical Duct banks Layout, cross sections, elevations and plan/ profiles, Civil and Structural Discipline. I have worked as an AutoCAD Designer/ Technician and I have a capability to work in any discipline and can provide more productions if AutoCAD works is concerned, I want to bring knowledge and insight gained through these various experiences to your good office and I believe that my background and experiences will help me be an asset to your company. To further acquaint you with the specifics of my background I am enclosing my resume and I hope you will consider me for this position. I look forward to meeting with you and discussing my qualifications in more details.
Cordially,
Joseph C. Ballesteros
DOHA, QATAR
Contact Nos: +974********
E-mail:*************.**@*****.***
JOSEPH CASTILLO BALLESTEROS
Position Applied for: AUTOCAD/ CIVIL-3D/ RIVET/ SKU – DESIGNER, TECNICIAN Objective: To contribute company’s goal and objective. Ensure to fulfill all the duties and responsibilities. PROFESSIONAL EXPERIENCE/S
UNICORP INTERNATIONAL CONTRACTING COMPANY (W.L.L.) Project: Dukhan Road Projects P005-Utilities System Department: Engineering
P.O. Box 31996 Al Rayyan, Qatar
CAD/C3D Designer / Operator Oct. 01, 2013 up to Present
Prepare Drawings according to the company’s CAD standard procedures for layering and detailing (ASHGHAL CAD & GIS/ PWA Standard).
Responsible for company’s standard Underground Utilities Shop/ Sketch Drawings for Wet and Dry Utilities.
Prepares Plan Layout, Section Details and Longitudinal Profile design of each utility with reference to the road crossing design and required clearance both for horizontal and vertical.
Prepare Civil3D works for required references (i.e. FGL, EGL, TOP, BOTTOM, and INVERT LEVELS).
Preparation of Standard Drawings for Structural and Reinforcement Details.
Prepare Isometric Drawings.
Prepare Red mark-up drawings.
Prepare As-built Drawings.
Prepare Scheduling, Quantity, Estimate, and other Clerical Works. UNICORP BEMCO & ALMABANI
Project: New Doha International Airport (NDIA) CP-13 Utilities System Engineering / Interface Department
P.O. Box 37988 Ras Abou-Aboud Street
Doha, Qatar
CAD Designer / Operator July 2006 to Oct. 01 2013
Responsible for Underground Utilities Shop Drawings i.e. Road Crossing electrical and telecommunication/ ATC ductbank systems, Potable Water, Irrigation, Waste Water, Fire Water Potable Fire Water, Chilled Water .
Assists with plans and schedules and prepare/ maintain design procedures, standards to provide quality design documents. Accept technical and administrative direction from the group of Engineer/ supervisor during the preparation of above ground and underground ductbanks and piping designs
Making design of longitudinal profile of each utility with reference to the road crossing design and required clearance both for horizontal and vertical.
Develop complete engineering drawings from information provided verbally on sketches or in notes, plans related drawing sequence to convey complete engineering information.
Make detailed drawing for fittings, reducers, tees, dismantling joints and bends as per the requirements given by engineer concerned.
Coordinates with engineers concerning changes, revisions, and monitoring of required drawings.
Create design for duct banks and piping’s and isometric drawings
Detailing shop/ working drawings for electrical and mechanical layout such as ductbanks, manholes and other required drawings as per contractual requirements.
Makes revisions and modifications to existing plans based on instruction/ sketches receive for engineers concerned include scaling up and down matching in details.
Site visit to execute necessary measurements and translate manually drawn plans and rough sketches into accurately scaled and more presentable drawing.
Prepares as-built drawings to reflect changes to designated work during construction. DAEWOO ENGINEERING & CONSTRUCTION Co. Ltd
Project: AGIP Western Libya Gas Project WAFA Plant (Oil & Gas) Department: Civil
Wafa, Libya
CAD Designer / Operator June 2003 to July 2004
Prepares Shop, Design, Detailed, Modification, and As-built Drawings at Logistic Area, Airstrip and Interconnecting Road.
Civil Works
Detailing & Preparation Layout of Site Grading.
Detailing of Pulling Pits Valve pits and Manholes for Pre- Casting.
Detailing and Coordinating the Trenches, Duct Bank, Sanitary Sewer, Irrigation Line, Potable Line and Fire Hydrant.
Detailing the Slopes of Flood Prevention Earth Ditch
Detailing of Landscape Pavement.
Road detailing: Asphalted/ Compacted roads
Detailing the Road Marking Plan/ Traffic Flow Diagram & Signaletics.
Detailing of Road Lighting, Fence & Gate
Building Works
Detailing of Foundations, columns, beams, flooring of the building
Prepares the Structural Framing Plan Detail
Prepares Elevation Front, Rear, Left and Right and Isometric views of the Building Mechanical Works
Coordinates and Detail of External and Internal Piping
Detailing of Piping Support
Prepare Fuel Gas and Fire Water Underground Piping Isometric
Scan drawings and send to head office thru e-mail
Photocopy and blue/ white print the approved drawings
Prepare the distributions of the approved drawings for office and field copies.
Managing Clerical Works
Franklin Baker Co. of the Philippines
Project: Desiccated Coconut Products
Department: Engineering & Maintenance
San Pablo City, Laguna
Draftsman / CAD Operator March 2000 to April 2002
Prepare Shop, design, detail, modification, and as-built Drawings, Quantity Surveys, Print, Photocopy, blue print; scan drawings and Filing drawings etc. Joseph C. Ballesteros
Monde Den Mark Nissin Biscuits Corp.
Project: Warehouse
Department: Logistic
Balibago, Sta. Rosa, Laguna
Assistant Custodian May-October 30,1999
Receiving/ dispatching products.
Assigning drivers for their trucking.
Encoding Quantity Products Arranging/ Making Contracts for the Contractors.
Managing Back Orders.
Arranging Stocks at Warehouse/ Inventory Works.
Education: Laguna College(1992-1997) Laguna College(1988-1992) Bachelor of Science in Civil Engineering High School Paseo de Escudero Street, S.P.C., Laguna
Paseo de Escudero Street, San Pablo
City, Laguna
Trainings
Attended:
Revit
Filipino Institute of Qatar (FI)
Introduction to BIM – (Level 1) Building
Information Management
Laguna Training Center/ MIRDC (May 20-24, ‘02)
(Al Waab Campus) 125 Al Bustan St.,
Farig Al Sudan
IQPC BIM Summit on the 25TH
September 2012 Doha, Qatar
Laguna Training Center(July-August ‘98)
Technical Drawing with AutoCAD Basic Computer Course Bagong Bayan, San Pablo City, Laguna Bagong Bayan, San Pablo City, Laguna Laguna Training Center(April 23-27, 2001)
Basic AutoCAD
Bagong Bayan, San Pablo City, Laguna
Special
Skills:
Civil 3D, Google Sketchup 3D, Revit, Knowledgeable of Computer Operation using the following WINDOWS, MS EXCEL, OUTLOOK, MS POWER POINT, VISIO PROFESSIONALS, Adobe Photoshop, Photo Impressions and AutoCAD 2000-2017 2D/3D. Model Design, Quantity Surveys
Managing Products {dispatching, receiving and inventory} Driving Skill (with Qatar Driver’s License)
Character Engr. Adel A. Abouassi Engr. E. H. Park
References: Project Manager Civil Manager
UNICORP INTERNATIONAL
CONTRACTING COMPANY (W.L.L.)
Daewoo Engineering & Const. Co.
Ltd.
Project: Dukhan Road Projects Seoul Head Office, Daewoo Center B/D 10fl,
Department: Engineering
Engr. Danilo M. Reyes Dr. Joaquin Siopongco
Eng’g. and Maint. Superintendent Dean, Engineering Department Franklin Baker Co. of the Phils. Laguna College
Maharlika Highway, S.P. Laguna Paseo de Escudero Street, SPC I hereby affirm that all the information above are true and correct to the best of my knowledge.
Contact this candidate