Assistant Service Representative
Resume:
CURRICULUM VITAE
OF
Mohammad Ismail Hossain
C/O, Mohammad Ali, House No: 932 (1st Floor)
Ibrahimpur Bazar Road, Kafrul, Dhaka -1206.
Phone # Mob-019********
E-mail: *****************@*****.***.
OBJECTIVE:
To build career as a dedicated person to explore myself fully and increase potential. To Learn and work effectively in an organization & constantly update my knowledge & skills. HIGHLIGHTS:
Experienced Technical Service (SSPC- Protective Coating Inspector PCI-Level-3) with a demonstrated history of working in the Coating Industry. Skilled in Negotiation, Energy Industry, operations Management, and Technical Support. Strong Operations Professional with a Masters of Business Administration (MBA) focused in Human Resources Management/ Personal Administration, General form University of Development Alternative. JOB EXPERIENCE: 4- Asian Paints Bangladesh Ltd.
Bangladesh Office: - Serving as a “Asst. Manager-Technical Service” since 1st February,2017 to Continue. Asian Paints Bangladesh Ltd, The Pearl Trade Center, House No-Cha 90/3 (4th) Floor, Progoti Sarani, North Badda, Dhaka-1212.
Key Responsibility:
Preparing Paint Specification for PC & Marine.
Carry On PEB,Power Plants,Tanks & Hull Inspection of Surface Preparation & Paint Application.
Withnessing & Carring out the Check accompanied with pre-Application, Application e.g. Surface Preparation, Climatic Conditions,metereal preparations,After Application Checks,Marking Area of Defects and assurance of Repair complience,Validity of Equipments and Meterial Storing Condition etc.
Study of Clients Specification & Developing technical Procedure accrodding to the requirments specified, Attendening the pre-job Conference and the predical mettings.
Experience of all coatings inspection instruments/Gages and test kids in level of using (As inspector) that includes: Climatical condition gages and Masurements,DFT magmetic Gages and Masurements, WFT Gages,Surface Visibal cleaness Comparator,Surface Profile Gages,Surface Contamination Test Equipments,Surface Temparature Thermometer,Penhole,Holiday & discontinue Testers of Dry applied Coats,Adhesion tester of Dry applied Coats.
Conversent to most of the international Codes Required standards (ASTM, ISO, SSPC &NACE).
Clarify reports prepared by the applicator & Reporting to the clients.
Preliminary Design & check all the painting and protective coating System. Method of application in Cluded: Brush, Roller, Spraying (Air Less Spray System), Field & shop application.
Withnessing & approving Pre-Job Evelution/after Complication Acceptness tests.
Preparing work Schedule and the weekly Work Plan that includes Manpower,Equipment Meterials &working Hours, appliated parties e.g.Sub-contractot,Suppliers &Conrtruction etc.
Inspection & Supervision
Preparing Report according to Company Policy.
JOB EXPERIENCE: 3- Berger Paints Bangladesh Ltd. (Hempel Paints) Bangladesh Office: - Serving as a “Technical Service Officer” since 8th April 2014 to 15th January,2017. Berger Paints Bangladesh Ltd, “Berger House”, House No- 8, Road- 2, Sector-3, Uttara Model Town, Dhaka-1230. Key Responsibility:
Preparing Paint Specification for Marine & PC.
Carry Out Tanks & Hull Inspection of Surface Preparation & Paint Application.
Withnessing & Carring out the Check accompanied with pre-Application, Application e.g. Surface eparation, Climatic Conditions,metereal preparations,After Application Checks,Marking Area of Defects and assurance of Repair complience,Validity of Equipments and Meterial Storing Condition etc.
Study of Clients Specification & Developing technical Procedure accrodding to the requirments specified, Attendening the pre-job Conference and the predical mettings.
Experience of all coatings inspection instruments/Gages and test kids in level of using (As inspector) that includes: Climatical condition gages and Masurements,DFT magmetic Gages and Masurements, WFT Gages,Surface Visibal cleaness Comparator,Surface Profile Gages,Surface Contamination Test Equipments,Surface Temparature Thermometer,Penhole,Holiday & discontinue Testers of Dry applied Coats,Adhesion tester of Dry applied Coats.
Conversent to most of the international Codes Required standards (BSI, ASTM, ISO, SSPC &NACE).
Clarify reports prepared by the applicator & Reporting to the clients.
Preliminary Design & check all the painting and protective coating System. Method of application in Cluded: Brush, Roller, Spraying (Air Less Spray System), Field & shop application.
Withnessing & approving Pre-Job Evelution/after Complication Acceptness tests.
Preparing work Schedule and the weekly Work Plan that includes Manpower,Equipment Meterials &working Hours, appliated parties e.g.Sub-contractot,Suppliers &Conrtruction etc.
Inspection & Supervision
Preparing Report according to Company Policy.
JOB EXPERIENCE: 2- PPG performance Coatings (M) Sdn Bhd (Sigma Coatings). Bangladesh Office: - Serving as a “Senior Technical Service Representative” since 1st Feb 2009 to 6th April 2014 PPG Performance Coatings (BD) Liaison Office, Zohura Tower (7th Floor), 1401 Sheikh Mujib Road, Agrabad C/A, Chittagong-4100.
Malaysia Office: -PPG Performance Coatings (M) Sdn Bhd, Lot 9 & 11,Jalan Tukang 16/4, P,O Box 7070, 40702 Shah Alam, Malaysia, Tel: +603-****-****, Fax: +603-****-****, Website :www.ppgpmc.com Worked in Malaysia, Myanmar as a Coating Inspector for DD & New Buildings. Project &Training:
20 Vessels dry Docking Experience: Blasting & Paint application during Repair works for Dry Docking any Marine Vessels at (1). Chittagong Dry Dock, Chittagong, Bangladesh (2). Malaysia Marine & Heavy Engineering
(MMHE), Johar Baru, Malaysia & (3). Myanmar Shipyards Ltd, Yangon, Myanmar.
Foreign Going 11 & Local 10 new Buildings Vessels Experience: Blasting & Paint application during New Building Marine Vessel or Structure (1). Western Marine Shipyard, Chittagong, (2). Western Fishers Shipyard, Chittagong, (3). Khan Brothers Shipyard & (4).Port of Tanjung Pelepas Sdn Bhd (PTP), Johor Baru, Malaysia. Foreign Project (New Building) Local Project (New Building) Grona Project (Germany) - 8 Vessels
KPT Project (Pakistan) – 2 Vessels
DKF (Denmark) – 1 Vessel
WMS-2 Vessel
WFSL – 3 Vessels
KBSL- 5 Vessels
Training:Arrange Training Session regarding Surface Preparation & Paint application At Western marine Shipyard, western Fishers Shipyard & Khan Brothers Shipyard. Key Responsibility:
Preparing Paint Specification for Marine & PC.
Carry Out Tanks & Hull Inspection of Surface Preparation & Paint Application.
Withnessing & Carring out the Check accompanied with pre-Application, Application e.g. Surface Preparation, Climatic Conditions,metereal preparations,After Application Checks,Marking Area of Defects and assurance of Repair complience,Validity of Equipments and Meterial Storing Condition etc.
Study of Clients Specification & Developing technical Procedure accrodding to the requirments specified, Attendening the pre-job Conference and the predical mettings.
Experience of all coatings inspection instruments/Gages and test kids in level of using (As inspector) that includes: Climatical condition gages and Masurements,DFT magmetic Gages and Masurements, WFT Gages,Surface Visibal cleaness Comparator,Surface Profile Gages,Surface Contamination Test Equipments,Surface Temparature Thermometer,Penhole,Holiday & discontinue Testers of Dry applied Coats,Adhesion tester of Dry applied Coats.
Conversent to most of the international Codes Required standards (BSI, ASTM, ISO, SSPC &NACE).
Clarify reports prepared by the applicator & Reporting to the clients.
Preliminary Design & check all the painting and protective coating System. Method of application in Cluded: Brush, Roller, Spraying (Air Less Spray System), Field & shop application.
Withnessing & approving Pre-Job Evelution/after Complication Acceptness tests.
Preparing Report according to Company Policy.
JOB EXPERIENCE:1- Dhaka Electric Supply Authority (DESA) Serving as an Assistant Accountant (Accountant, Additional charge) since 1st October 2001 to 31th January 2009 in Dhaka Electric Supply Authority (DESA), Administration Department, DESA Building, 1-Abdul Gani Road, Dhaka
-1000.
Key Responsibility:
Preparing Salary Sheet of all staff
Making Budget & Expenditure
Officer’s & Staff salary payment
Store & Procurement
Preparing Debit & Credit Voucher
Maintains Petty Cash
Prepared monthly statement with compare of Bank statement
Cash deposit & withdraw from bank
Maintains daily expenditure
Any other works entrusted by the authority.
EDUCATIONAL QUALIFICATION:
ACADEMIC
S.S.C - 1995
First Division, Arts Group
Institute-Lalashari High School
Dhaka Board.
H.S.C -1998
Second Division, Arts Group
Institute-Tejgaon College
Dhaka Board.
B. A (Pass) -2001
Second Division, Arts Group
Institute-Tejgaon College
Under National University.
M.Sc. (Exam was Held 2005) - 2003
Second Class, Psychology
Institute-Dhaka College
Under National University.
PROFESSIONAL DIPLOMA
M.B.A
Major-HRM
Result: CGPA-2.66 (Out of – 4.00)
Diploma in Computer Science & Application
(DCSA) – 2006
Result: CGPA-2.98 (Out of – 4.00)
University of Development Alternative (UODA).
– 2008
Institute – Institute of Science & Technology
(IST).
Under Bangladesh Open University.
Training:
The society for protective coatings (SSPC):
PCI-Level-2 (Protective Coating Inspector- ID-79673) 25th-31st July 2016 Chennai, India. PCI-Level-3 (Protective Coating Inspector- ID-90770)- 23th-29st October 2017 Chennai, India. Customer Centricity Training:
10-11, March, 2018, Six Season Hotel, Gulshan-2, Dhaka. Arrange by Asian Paints Bangladesh Ltd. Team Building Training:
20-21, December 2016, Base Camp, Gazipur. Arrange by Mind Mapper, Bangladesh. IMO Performance Standard for Protective Coatings (PSPC): 11-12 June/2012, Hotel Santmartine, Chittagong. Arrange: BUREAU VERITAS (B.V), Bangladesh.
Computer Literacy:
Operating System: Windows
Packages: MS Word, MS Excel.
Internet
Net working
PERSONAL INFORMATION:
Father’s Name : Late Mohammad Motiur Rahman
Mother’s Name : Razia Begum
Permanent Address : Vill-Amirothi, P.O-Thanarhat
P.S – Chatkhil, Dist –Noakhali.
Mailing Address : C/O, Mohammad Ali, House No: 932 (1st Floor) Ibrahimpur Bazar Road, Kafrul, Dhaka -1206.
Phone # Mobile 019********
E-mail: *****************@*****.***.
Date of Birth : 27 November 1980
Nationality : Bangladeshi
Religion : Islam
Marital Status : Married
Home District : Noakhali
National ID No : 269********** (old), 460-***-**** (New) Passport No : BN0187554
LANGUAGE PROFICIENCY:
Conversant in both English and Bengali (Reading, Writing and speaking) HOBBIES & INTEREST:
Reading, Traveling, Music & Sports.
NAME OF REFERENCES:
Mohammad Hasnat Chowdhury Mohammad Harun –ar- Rashid GM (HR)
Dhaka Power Distribution Company Ltd (DPDC),
1-Abdul Gani Road, Dhaka. Phone +02- 9550295
(Off).
Assistant Program Officer (Finance & Accounts),
UCEP,Bangladesh, Cell Phone: -
Mr. Prem Sankar
Director
Marquis Oil (M) Sdn Bhd
No-31, Jalan Mega 1 4, Taman Perindstrian Nusa
Cemerlang,79200 Nusajaya Johor, Malaysia.
Cell no +601********
Email- ******.****@**********.***
I hereby declare that all the information provided above is to the best of my knowledge and belief.
(Mohammad Ismail Hossain)
Contact this candidate