Resume

Manager Engineering

Location:

Bowie, MD

Posted:

June 06, 2019

Contact this candidate

Resume:

Overview

To seek a position in which I can be part of a team that will provide opportunities to utilize my experience and skills in a multitude of engineering disciplines. With over 25 years of CAD design I have actively participated in all aspects of engineering design. My experience consists of multi-dimensional Civil, Structural, Naval designing, HVAC, Fire Protection, Electrical, Mechanical and Structural design. I have also acquired experience in Facilities Management/Space Planning and Building Operations.

Markon Solutions – 09/2014 – Present

Program Manager, Sara Wittmer 202-***-****, 400 S Maple Avenue, Suite 230, Falls Church, Va. 22046

As Senior Space Planner/CAD Designer I am responsible for:

Facility management and space planning of day-to-day furniture layout and space planning management at Defense Intelligent Agency (DIA) headquarter and the Reston campus, With the use of AutoCAD release 2014 and Archibus 20.2 software.

Create concept drawings and documents for client request for furniture layout/refresh and space layouts and reconfiguring.

Performed site surveys in DIA headquarter, the Pentagon and the Reston campus.

Assisted in space planning and layouts for incoming personnel from the Pentagon due to the reduction of personnel out of the Pentagon due to the (Pentagon Reduction Project).

Create briefing and course of action (COA) for existing conditions and ways-ahead for the Reston campus.

Work for 9 months as a project manager at the National Reconnaissance Office (NRO ADF-E) Support Division Facility Support Branch (ADF-E/SD/FSB) SETA Team, I provided support to the Government staff and to the facility support contractor. I was the team subject matter expert for mechanical, fire detection, fire protection, and security projects. In that capacity I prepared the scope of work (SOW) and government cost estimate (GCE) to initiate the funding process for numerous projects under my areas of expertise. I analyzed proposals received on his projects and then produced technical evaluations (TE) of them that included a recommendation of whether or not the government should approve them. Once a project was funded I would monitor the progress and represented the government from design through construction to project close out. I would document these projects in the two databases, SAP and Archibus, required by NRO ADF-E.

My current duties and tasks are to work with the engineers and designers in FAC-1B to create and revised current As-built and existing design files and drawings in the “Vault files” to the correct CAD standards, layer levels and current conditions and layouts within DIA Headquarter. I am accomplishing this task by conducting site surveys of the modules within DIA Headquarter. I would accomplish this survey by doing a visual account of the space base on a current floor plan of the area and take measurements to assure accuracy. Update or revised changes not capture on plans, such as wall thickness, walls that rise to concrete ceiling or just stop at drop ceiling. Check furniture layout and revised drawing to suit current layout. I have been ask to also take on the task of space planning, I am doing my previous task of working on miscellaneous requests from various client for concept designs to revise space base on their request and provide a package that will show that concept along with a cost estimate of that project for approval to be done. Help, aide and assisted in other matters beneficial to our mission.

Facilities Solutions Group – 09/2011 - 06/2014

Technical Lead, Jeffery Ponder 202-***-****, 4100 Lafayette Center Drive, Suite 105, Chantilly, Va. 20151

As Facilities Infrastructure Specialist I am responsible for:

Facility management of day-to-day building operations and furniture layout management at

National Geospatial Intelligent Agency (NGA). With the use of AutoCAD release 2014 and Archibus 20.2 software.

Create drawings and documents for client daily usage and maintenance of facilities.

Performed correction and clean-up of architectural drawings for the North and South building to include:

Removal of multiple lines.

Removal of incorrect layers.

Correction of line weights and line types in accordance to layering standards.

Correction and/or redefining of drawing blocks to suit drawing standards.

Participated in upcoming site survey of the 1st, 2nd 3rd floors of both North and South buildings

and the Ellipse floors 1 thru 6 to update PeopleSoft data and Architectural and furniture data.

Correction and/or redefining of drawings to reflect updated location and layout of furniture on

drawings.

Correction and/or redefining of drawings to reflect updated Architectural location and layout of new and revised rooms on drawings.

Input updated PeopleSoft data in Web Central tables.

Input updated Mailstops data in Web Central tables.

Created test plan for testing of CAFM Change management and Archibus 20.2 upgrade.

Participated in the testing of CAFM Change management and Archibus 20.2 upgrade for the East Building Operating process role.

Continuous correction and/or redefining of drawings to reflect updated Architectural location and layout of new and revised rooms on drawings as well as layout of furniture.

Participate in Edit/Approval of CAFM Change Management Requests and completing service request for Service Desk and CAFM system Inquiries for Building Operations.

ICS – Innovation – Collaboration – Synergy – 10/2010 - 09/2011

Project Manager, Sorashe Debella 703-***-****, 2650 Park Tower Drive, Vienna, Va. 22180

As CAD Technician I am responsible for:

Creating Electrical design drawings and documents.

oCreated design drawings based on engineering mark-ups, sketches, specifications, and as-built drawings for CCTV monitoring security cameras and PA systems and equipment racks. for Wmata’s Redline stations.

oCreated design drawings and documents for ETS wire diagrams, ETS boxes and Interconnection designs base on engineering mark-ups, sketches, specifications and as-built drawings for Wmata projects.

Creating finished plotted and printed drawings and documents for final package to client.

Creating CD’s of all engineering data, specifications and electronic copies of drawings by utilizing Adobe software to create PDF’s type files.

Parsons Transportation Group – 2/2001 - 11/2009

CAD Manager, Ross Thomas 301-***-****, 100 M Street, SE, Washington, DC 20003

As the Senior Computer Aided Designer I was responsible for:

Surveying the Washington Metropolitan Area Transit Authority (WMATA) rail system.

oTook photos while walking the rails to inspect tracks for stress cracks, debris, third rail housing, tunnel lighting and electrical equipment.

Surveying Traction Power, Tie Breaker and Automatic Train Control facilities.

oTook photos of existing equipment and building layout.

oTook digital measurements of the buildings foot print and equipment.

oData collection of mechanical and electrical equipment (AC and DC Switchgear, Transformers, Bus Ducts and Electrical Panels) for equipment reports.

Surveying existing buildings to be retrofitted with new equipment.

oCompared and verified existing drawings with new measurements to verify the accuracy of the building’s footprint.

oCollected data from existing equipment to verify the dimensions.

Creating Electrical, Mechanical and Structural design drawings and documents

oCreated design drawings based on engineering mark-ups, sketches, specifications, and

oSite surveyed data and As-builded or existing drawings.

Creating finished plotted and printed drawings and documents for final package to client.

Creating CD’s of all engineering data, specifications and electronic copies of drawings by utilizing Adobe software to create PDF’s type files.

Henning’s, Durham and Richardson Inc. – 6/1996 - 2/2001

Supervisor, Adam Conrath – Unavailable, 1101 King Street, Alexandria, Va. 22314

As the Assistant CADD Manager/Technician:

Revised and created Heating, Ventilation and Air Conditioning (HVAC)/Piping and Fire Protection system drawings.

Applied knowledge of verifying Fire Protection systems pipe dimensions and location of Halon and Sprinkler systems as well as engineering specification of their fixtures.

Provided structural design of Telecommunication hardware for placement in rural and urban areas from engineer specification included designs of roof top (sled), wall mounted and self standing towers and Antennas. Specifications were provided by engineering write-ups from site visits.

Provided Schematic drawings of the Electrical/Telecommunication wiring and cables.

Created finished plotted and printed drawings and documents for final package to client.

Created CD’s of all engineering data, specifications and electronic copies of drawings by utilizing Adobe software to create PDF’s type files.

Fleming Corporation – 4/1994 - 6/1996

As a CAD Technician:

Created Structural and Civil Site plans, elevation profiles and structural drawings of building, with Engineers and Surveyors specifications, within Anacostia Park in support of revitalization project of the park.

Responsible for creating finished drawings and documents for final package to client.

Ralph M. Parsons Corporation – 9/1991 - 4/1994

As a CAD Designer:

Drafted for Federal Aviation Administration (FAA) Air Traffic Control Facilities. This included Heating, Venting and Air Conditioning (HVAC), Piping and Fire Protection Site Surveys and Designs.

Conducted site visits to take photographs, measurements of Mechanical ducts sizes and locations, collected data of duct CFM’s for engineering reports, sizes and location of piping.

Took photographs and measurements of Fire Protection Sprinkler system supply/return piping sizes and location.

Created Electrical, Mechanical and Structural design drawings and documents based on engineering mark-ups, sketches, specifications, and site surveyed data and As-built or existing drawings.

Created finished plotted and printed drawings and documents for final packaging to client.

Created CD’s of all engineering data, specifications and electronic copies of drawings by utilizing Adobe software to create PDF type files.

Engineering Science Inc. – 4/1989 - 9/1991

As a Structural CAD Operator:

Created Structural drawings for Sludge Dewatering Facility from engineer’s mark-ups, notes and specification data site surveyed area.

Created finished plotted and printed drawings and documents for final package to client.

Assisted as construction manager and inspector at Water Treatment Facility. Reviewed drawings for drafting and design defects in construction of facility.

As a Construction Inspector for Anne Arundel County Department of Utilities:

Worked with Residence Inspector and Construction Managers to manage various sewage treatment pump station sites.

Inspected contractor at various sites to assure completion of tasks according to contract and specifications.

Wrote daily reports on site conditions, weather, personnel and equipment and took photographs and video recordings of work done on site.

Newport News Shipbuilding (Engineering Department) – 8/1985 - 4/1989

As a CAD Technician:

Created 3 dimensional files of complex structural layout of various parts of naval ships. Made two-dimensional drawings and electronic files for making manufactured parts to be processed and cut by a process called Computer Aided Manufacturing (CAM). These parts are then welded together to make complex structures and modules.

Create 2 dimensional drawings to show dimensions and welding data of structures base on welding specifications of Welding Engineers and the Department of the Navy.

Created finished plotted and printed drawings and documents for final package to client.

Skills:

Fluently use:

IBM 3080 Computer Aided Design and Manufacturing (CADAM)

Microstation versions 95, SE and V8

AutoCAD releases 12, 14, 200i, 2007, 2010, 2014 and 2018

Archibus version 20.2

Fundamental training of Building Operations in Web Central and Smart Client version 20.2

Education:

Warwick High School, Newport New VA Diploma 1977

Morgan State University, Baltimore, MD Coursework 1977-1978

Howard University, Washington, DC Architecture (no degree) 1978-1981

Maryland Drafting Institute, Langley Park, MD Diploma/Eng. Technology 1982-1983

Strayer College, Washington, DC Novell-Computer Network Administrator 1994-1995

USDA Graduate School, Washington, DC Unix and C language 1994

Awards:

Award of Successful Completion of Metro Matters Traction Power Upgrade Project for December 31, 2008 for the WMATA Office of Engineering Service Infrastructure Renewal Program Parsons Transportation Group.

Award of successful and excellent work on Traction Power Upgrade Project 2009

Clearance:

TSI Clearance – June 10, 2011

REFERENCES:

1.Mr. Jeffery Ponder

(Work) 202-***-****

E-mail: ac9jum@r.postjobfree.com

Mr. Bradley Thomas

(Home)202-***-**** (Cell) 202-***-****

E-mail: ac9jum@r.postjobfree.com

2.Mr. Eric T. Washington

(Home) 202-***-**** (Cell) 202-***-****