Manager Project
Resume:
RICHELLE R. LOPEZ
No. ** Centro I, San Roque,
San Manuel, Pangasinan, Philippines
Contact No. +968******** (Oman)
Home No. +639********* (Philippines)
Skype ID.: ritzlo
E-mail: *********@*****.***
**********@*****.***
SAUDI ARAMCO SAP NO. 70019468
CAREER OBJECTIVE:
To work for a company where my extensive knowledge and skills Construction Management and Quality Control Management can be utilized and challenge for the benefit of the company and could be develop my potential ability to be more effective and efficient in my chosen line of career.
EDUCATIONAL ATTAINMENT:
COLLEGE 1999-2004 Technological Institute of the Philippines
363 Casal St., Qiuapo Manila
Bachelor of Science in Civil Engineering
3rd Placer Civil Eng’g Quiz Show (TIP-Mla)
SECONDARY 1996-1999 Juan C. Laya National High School
San Manuel, Pangasinan
Outstanding Student of the Year
PRIMARY 1991-1996 San Roque Elementary School
San Roque San Manuel, Pangasinan
Graduated with Honor
SEMINARS/TRAINING ATTENDED:
October 10, 2017 “I Care Awareness Training”
CB&I – CTCI BV (OMAN BRANCH) – HSE Site Office Sohar, Oman
March 12, 2017 “Idocs Training”
CB&I – CTCI BV (OMAN BRANCH) – Site Office Sohar, Oman
September 15 – 19, 2008 “Building Wiring Installation NC II”
Don Primitivo Perez Hall – San Manuel, Pangasinan
February 13, 2004 “Seminar on Geotechnical Structures”
Technological Institute of the Philippines – Quiapo, Manila
September 26, 2002 “SANITARY ENGINEERING: A Vital Component in a Livable Environment”
Technological Institute of the Philippines – Quiapo, Manila
September 24, 2001 “Global Positioning System”
Technological Institute of the Philippines – Quiapo, Manila
WORKS EXPERIENCE:
March 05, 2017 – Present QA/QC Civil/Building/Structural Inspector
McDermott (CB&I) – CTCI BV (OMAN BRANCH) - EPC
P.O. Box 1691 Hamriya,
Postal Code 131
Sultanate of Oman
Job Description:
(LIWA PLASTIC INDUSTRY COMPLEX - EPC-1)
Oman Oil Refineries and Petroleum Industries Co. (ORPIC)
Brief Description of Duties
To monitor the ongoing Civil, Building, Structural and Road activities by implementing the Project Quality Plans and Procedures in accordance with the Company QC procedures and as per ORPIC Standard, International Standards (ASTM,BS EN, ACI, IBC, AASHTO, AISC, ETC.) And specific contract requirements.
Acting as QC Supervisor during official leave.
Primary Duties and Responsibilities:
1)
2)To coordinate with construction crew for on-going civil/building/structural/road activities, including but not limited to:
3)Bench Mark verification survey.
4)Excavation (grade, elevation and coordinates).
5)Backfilling & Compaction (general fill, fill, select fill, structural fill, sand fill and base/sub base course using Sand Cone Method),
6)Review Material approved and material receiving inspection.
7) Rebar inspection (size, spacing, FBE coating & concrete cover),
8) Formwork inspection (dimension, rigidness and anchor bolt projection),
9) Field Density Test (cohesive and non-cohesive soil),
10) Pre-Concreting & Concrete Pouring inspection (slump test, temperature, concrete sampling, and curing),
11)Conduct trial mix for structural and non-structural concrete, grouting.
12)Conduct trial mix for marine concrete on Jetty Area.
13)Concrete Structure Coating ( moisture test prior to application of bituminous coating)
14)Grouting works (surface preparation, temperature, sampling and curing).
15)Trench for piping and underground cables.
16)Building water proofing and finishing works.
17)Steel structure erection works.
18)Tank, equipment and steel structure foundation hand-over inspection works.
19)Conduct material receiving inspection. (Steel bars, grout cement, embedded item, etc.)
20)To review the relevant documents prior to start of construction e.g. IFC, project specification, QCP, ITP, SSR, NCR etc.
21)To initiate the RFI’s for Client’s witness of inspection point as per approved ITPs.
22)To be more proactive to construction crew for advising to correct the activities this could lead to non-conformance.
23)Be vigilant for upcoming scheduled activities in advance to coordinate with 3rd parties in advance for the activities require testing e.g. FDT, Concreting, and Asphalting etc.
24)To coordinate with surveyor to finalize the bench mark survey setting out prior to start of construction.
25)Ensuring all incoming materials are inspected, as approved and stored properly as recommended.
26)Monitor and control incidents of non-compliance or non-conformance and propose corrective action, investigate the effectiveness of corrective action.
27)Responsible for Project Quality documentation and implementation of Project Procedure and Projects Quality Plan.
28)Ensure all inspections are done as per Inspection and Test Plan/Contract and that these are documented on pre-defined checks sheets.
29)Ensure implementation of all design requirements including design verification at site.
30)Attending and initiating QA/QC meeting for sub-contractor and attending QA/QC meeting initiate by OWNER.
31)Handle and manage Quality issues and discussed to OWNER prior to approval.
32)Assigned for Greenfield, Brownfield and Jetty (new loading arm) area works.
33)In-charge for quality inspection for Off-shore New Dolphins for additional feeders.
Secondary Duties and Responsibilities:
1)Complies with the highest level of safety during all stages of work to avoid any type of incidents and or accidents. Take reasonable care of own health and safety and that of others in the workplace.
2)Complies with all statutory requirements connected with the implementation of project.
February 01, 2015 – January 31, 2017 QA/QC Civil/BUILDING Inspector
KAMCO General Contracting –Subcontractor
(Civil and Building Specialists)
(SAUDI ARAMCO PROJECT)
P.O. Box 8033, 31482
Dammam, Kingdom of Saudi Arabia
Job Description: (RIYADH CLEAN TRANSPORT FUEL PROJECT for SAUDI ARAMCO RIYADH REFINERY)
Saudi Arabian Oil Company (ARAMCO)
SAMSUNG ENGINEERING - EPC
Brief Description of Duties
To monitor the ongoing Building & Civil activities by implementing the Project Quality Plans and Procedures in accordance with the Company QC procedures and as per ARAMCO Standard, International Standards (ASTM, ACI, IBC, AISC, AASHTO, ETC. ) And specific contract requirements.
Primary Duties and Responsibilities:
1)To initiate the RFI’s for Client’s witness of inspection point as per ITPs.
2)To be more proactive to construction crew for advising to correct the activities this could lead to non-conformance.
3)Be vigilant for upcoming scheduled activities in advance to coordinate with 3rd parties in advance for the activities require testing e.g. FDT, Concreting, and Asphalting etc.
4)To coordinate with surveyor to finalize the bench mark survey setting out prior to start of construction.
5)To review the relevant documents prior to start of construction e.g. IFC, project specification etc.
6)Ensuring all incoming materials are inspected, as approved and stored properly as recommended.
7)Preparation of Method of Statement for various projects/activities.
8)Monitor and control incidents of non-compliance or non-conformance and propose corrective action, investigate the effectiveness of corrective action.
9)Responsible for Project Quality documentation and implementation of Project Procedure and Projects Quality Plan.
10)Ensure all inspections are done as per Inspection and Test Plan/Contract and that these are documented on pre-defined checks sheets.
11)Ensure implementation of all design requirements including design verification at site.
12)To coordinate with construction crew for on-going civil/building activities, including but not limited to:
13)Excavation (grade, elevation and coordinates).
14)Backfilling & Compaction (general fill, fill, select fill and base course using Nuclear Method),
15)Rebar inspection (size, spacing, FBE coating & concrete cover),
16)Formwork inspection (dimension, rigidness and anchor bolt projection),
17)Field Density Test (cohesive and non-cohesive soil),
18)Pre-Concreting & Concrete Pouring inspection (slump test, temperature, concrete sampling, and curing),
19)Concrete Foundation Coating ( moisture test prior to application of APCS-3 or APCS-10 and after check DFT or WFT)
20)Grouting works (surface preparation, temperature, sampling and curing).
21)To inspect all interior and exterior finish of building including gypsum board works, acoustical false ceiling works, floor riser works, epoxy floor works and tiles works (vinyl, ceramics, and quarry acid tiles).
22)To ensure all building water proofing works meets client’s satisfaction.
Secondary Duties and Responsibilities:
1) Complies with the highest level of safety during all stages of work to avoid any type of incidents and or accidents. Take reasonable care of own health and safety and that of others in the workplace.
2) Complies with all statutory requirements connected with the implementation of project.
3) Check and verifies related invoice of third party for their billing.
June 11, 2012 – July 31, 2014 QA/QC Civil Inspector
Rajeh H. Al-Marri & Sons Company - EPC
(Oil, Water & Gas Specialist)
(Contracting SWCC PROJECT)
P.O. Box 1, Abqaiq 31992
Dammam, Kingdom of Saudi Arabia
Job Description: (24” NATURAL GAS TRANSMISSION SYSTEM PROJECT (PIPELINE) for AL-KHOBAR DESALINATION PLANT SWCC)
Saudi Arabian Oil Company (ARAMCO)
Brief Description of Duties
To monitor the ongoing Building & Civil activities by implementing the Project Quality Plans and Procedures in accordance with the Company QC procedures and as per ARAMCO Standard, International Standards (ASTM, ACI, AISC,, AASHTO, ETC.) and specific contract requirements.
Primary Duties and Responsibilities:
1)To coordinate with construction crew for on-going civil/structural activities, including but not limited to:
2)Excavation (grade, elevation and coordinates).
3)Backfilling & Compaction (general fill, fill, select fill and base course using Nuclear Method),
4)Rebar inspection (size, spacing, FBE coating & concrete cover),
5)Formwork inspection (dimension, rigidness and anchor bolt projection),
6)Field Density Test (cohesive and non-cohesive soil),
7)Pre-Concreting & Concrete Pouring inspection (slump test, temperature, concrete sampling, and curing),
8)Concrete Structure Coating ( moisture test prior to application of APCS-3 or APCS-10)
9)Grouting works (surface preparation, temperature, sampling and curing).
10)Asphalt works (sub-grade, sub-base & base course preparation, temperature, prime coat application, tack coat application).
11)Conduct material receiving inspection. (Grout, fence materials & accessories, etc.)
12)To review the relevant documents prior to start of construction e.g. IFC, project specification etc.
13)Be able to do inspection of structural steel fabrication, erection till final inspection.
14)To initiate the RFI’s for Client’s witness of inspection point as per ITPs.
15)To be more proactive to construction crew for advising to correct the activities this could lead to non-conformance.
16)Be vigilant for upcoming scheduled activities in advance to coordinate with 3rd parties in advance for the activities require testing e.g. FDT, Concreting, and Asphalting etc.
17)To coordinate with surveyor to finalize the bench mark survey setting out prior to start of construction.
18)Preparation of Method of Statement for various projects/activities.
19)Ensuring all incoming materials are inspected, as approved and stored properly as recommended.
20)Monitor and control incidents of non-compliance or non-conformance and propose corrective action, investigate the effectiveness of corrective action.
21)Responsible for Project Quality documentation and implementation of Project Procedure and Projects Quality Plan.
22)Ensure all inspections are done as per Inspection and Test Plan/Contract and that these are documented on pre-defined checks sheets.
23)Ensure implementation of all design requirements including design verification at site.
Secondary Duties and Responsibilities:
3)Complies with the highest level of safety during all stages of work to avoid any type of incidents and or accidents. Take reasonable care of own health and safety and that of others in the workplace.
4)Complies with all statutory requirements connected with the implementation of project.
5)Check and verifies related invoice of sub-contractors/third party for their billing.
October 1, 2010 – May 31, 2012 QC Civil Engineer
China CAMC Engineering Co., Ltd. - EPC
2104 A & B West Tower PSE, Bldg.,
Exchange Rd. Ortigas Center, Pasig City
Job Description:
AGNO RIVER INTEGRATED IRRIGATION PROJECT (DAM PROJECT) for National Irrigation Administration, NIA
Primary Duties and Responsibilities:
1)Organize, implement, conduct and manage the QA/QC Programs as per the Company's Quality Policy.
2)Coordinate the document controls of technical submittals, drawings, etc. with the Project Team and to ensure that the QA/QC validation has been done, to ensure their issue, amendments and recall of controlled documents.
3) Coordinate all inspections; monitor the required tests and record inspections and tests made pass the Contract Plan and Contract Specifications.
4)Liaise with the Client's representatives for the conduct of day-to-day quality related project activities.
5)Coordinate with the Project Manager regarding work performance and hold authority to stop work in any area where discrepancies remain uncorrected and/or cancel the stop work order upon satisfactory correction of noted deficiencies.
6)Provide technical support to the Project Manager and guidance to site staff in submission of materials for approval, request for inspection, shop drawings, As-built drawings, O & M manual.
7) Assist QA/QC Manager in conducting internal quality audits.
8) Ensure that Non-Conformance Report (NCR) is raised once the activities deviated from the Contract Specifications or normal construction industry practices.
9)Coordinate with the project staff to compile and maintain pertinent records of inspection and testing until end of the contract and all pertinent records for retention on completion of the project.
10) Attend Monthly Project Review Meetings (PRM) and alert the project team of any potential problems.
July 16, 2007 – September 30, 2010 Administrative Aide III
LGU – San Manuel (Office of the Mayor)
San Manuel, Pangasinan
Job Description:
(Infrastructure Project: Road, Drainage, School Bldg. & Office Bldg. etc.)
Implement the highest quality standard as per contract requirements.
Supply of materials delivered must sufficient enough for a week activities to avoid any possible delays.
Ensure health and safety of workers to any on-going activities.
Provide construction progress monitoring plan to ensure the project is on track.
Provide daily, weekly and monthly reports etc.
Provide necessary documents as needed for the project.
Review and conduct cost estimate for other proposed project.
October 1, 2005 – July 06, 2007 QC Civil Engineer
Marubeni Philippines Corporation - EPC
8th & 9th Floors, L.V. Locsin Building,
Ayala Avenue corner Makati Avenue,
Makati City, Philippines 1226
Job Description:
(230KV SRPC to SMP Sub-station Transmission Line Project)
1)Implement all applicable Quality oversight, monitoring, surveillance and inspection plans, procedures and checklists for inspecting and reporting of the work activities;
2) Perform Quality oversight, monitoring, surveillance and inspection of the work which includes: Overhead Transmission to ensure contractors' and suppliers' quality programs are fully implemented and effective through review and acceptance of contractors' quality documentation (including inspection and test plans, procedures, quality records, final documentation, etc.);
3) Ensure full compliance with the regulatory requirements, technical specifications, drawings and any special supplier installation procedures as defined in contractors and suppliers' inspection and test plans;
4)Provide daily inspection reports and maintain quality control files of all on-going construction work;
5)Implement the quality audit and surveillance plan and issue reports such as corrective actions, non-conformance's, and observations;
6)Work with Contractors and Suppliers to ensure clarity in understanding project and technical requirements;
7) Interface daily with site engineering team to ensure compliance to all technical specifications and drawings for selected scopes;
8)Review documentation received from contractor (material specification, method statements, Inspection and Test Plans, drawings, test results, other technical documentation, etc.) For implementation and compliance;
9)Attend construction meetings as required;
10) Ensure turnover documentation is complete;
11) Work with contractors and suppliers to ensure all audit findings, NCR, etc. are closed; and
12) Broad oversight of safety and environment.
June 20, 2005 – September 15, 2005 Engineering Aide
San Roque Power Corporation (SRPC)
San Roque, San Manuel, Pangasinan
Job Description:
FIELD WORK:
-Mapping/survey
-field supervision
-power plant orientation
OFFICE WORK:
-drafting
-computer application/encoding
-cost and materials estimation
June 7, 2004 – June 10, 2005 Assistant Field Supervisor
Raytheon Ebasco Overseas Ltd. - EPC
San Roque, San Manuel, Pangasinan
Job Description:
(San Roque Multi-Purpose Dam Project)
1)Managing the Site.
2)Site supervision.
3)Verify the quantity of required construction materials, its availability and request immediately to the procurement.
4)Check the shuttering and reinforcement according to structural and architectural drawing, before commencement of concreting work.
5)A timely arrangement of the materials, Manpower & equipment’s needed for the work.
6)Worked on estimation of materials required on the revised drawing Coordination of the consumption with the project management.
7)Check the detailed survey and Lay-out of structures before the execution of construction activities.
8)Supervision of Civil works, taking out Quantities, Quality Control of materials for use, Preparing Progress reports.
9)Coordination with consultant and architectures. Satisfy client requirements according to their need.
November 17, 2003 – April 9, 2004 On-Job-Training
Asian Construction and Development Corporation
San Roque, San Manuel, Pangasinan
Job Description:
(San Roque Multi-Purpose Dam Project)
-Computer application/encoding
-field supervision
-cost and materials estimation
-drafting
SKILLS
Microsoft Office, Project Estimate, AutoCAD, Driving Pro (Philippine and Oman License)
PERSONAL DATA:
Passport No. : EC8198402
Passport Validity : JULY 01, 2021
Saudi Council of Engineer : Professional Civil Engineer (No. 175947)
CHARACTER REFERENCES:
Cheng Chin Fu McDermott (CB&I) – CTCI BV (OMAN BRANCH)
QA/QC Site Manager P.O. Box 1691 Hamriya,
Postal Code 131
Sultanate of Oman
E-mail: ******@****.***
David Jonas McDermott (CB&I) – CTCI BV (OMAN BRANCH)
QA/QC Deputy Site Manager P.O. Box 1691 Hamriya,
Postal Code 131
Sultanate of Oman
E-mail: ******@*********.***
Reynaldo Martin Rajeh H. Al-Marri& Sons Company
Project Manager P.O. Box 1 Abqaiq 31992, Kingdom of Saudi Arabia
Mob. No. +966-0558820289
E-mail: ************@*****.***
Manuel Dumdum FICHTNER GmbH & Co. KG.
Construction Manager Consultant Sarweystrasse 3, 70191 Stuttgart, Germany
Mob. No. +966-0508682428
E-mail: ******.******@********.**
Tang Hua Chuan China CAMCE Engineering Co., Ltd.
QSHE Manager San Roque, San Manuel, Pangasinan
(Field Office)
Tel. No.+63-090********
Edgar Almoite San Roque Power Corporation
Project Consultant San Felipe East, San Nicolas, Pangasinan
Tel. No. +63-091********
E-mail: *********@*****.***
Contact this candidate