Mechanical Engineer Project

OBASI CHUBUIKE JONAS

Address: Flat *, Building 34, Street 830, Zone 26, Najma, Doha. Qatar

Marital status: Married

Gender: Male

Language: Fluent in English (writing & spoken)

Visa status: Transferable visa (NOC readily available)

Mobile: 009**-********

E-mail: ****************@*****.***

CAREER SUMMARY:

A results driven, self-motivated and resourceful QA/QC Inspector / Engineer, Site and Mechanical Engineer with hands on experience in Quality Inspections, Mechanical activities and Site Coordination. NDT (ANST) Level II Certified as per ASNT on 6 Methods: UT, MT, PT, VT, RFI and ET. Familiar with ISO 9001 Standards (IMS – Requirements)

KEY COMPETENCY:

Ability to interpret; review technical manuals, schematics with outstanding Quality inspection.

Skilled to working and communicating with contractors and vendors.

Proficiency in MS Office suite (word and excel).

Familiarity with Environmental and Safety regulations related to NDT. Welding, and Mechanical activities.

Proficient in document preparation

In-depth knowledge of developing plans and methods for quality improvement

Great leadership skills with attention to details, working independently and as a team.

WORK/PROJECT EXPERIENCE:

COMPANY: ALYSJ JV

POSITION: QA/QC Engineer

PROJECTs: Qatar Metro (Gold Line)

CLIENTS : Qatar Rail July 2015 – Dec 2018

COMPANY: JGC Corporation Doha, Qatar.

POSITION: QA/QC Inspector

PROJECT: Qatar Barzan Project. April 2013 – June 2015

CLIENTS: Rasgas Qatar.

KEY ACTIVITIES:

Preparation and submission of Project Quality Plan and Inspection/Test Plan.

Followed ISO 9001:2008, ASTM, ASME and ASHRAE standards.

Review and approval of QC documents like QCP, ITP, and QCS.

Reviewing of Sub-contractor’s PQP, ITP’s, Method Statements, Checklists, Testing/Commissioning forms etc.

Responsible for the project’s compliance with ISO 9001:2008 standards..

Prepared and submitted Non Compliance Report (NCR) for any deficiency of work reported which has not been corrected that elapsed within the given period time.

Check the documents certifying the tests, controls and inspections carried out and ensure their orderly arrangement and documentation.

Inspection as per QC plan on Rail line, Piping; Like Material Identification, Fit up, Visual Testing, NDT clearance, Dimension & Level check, Mechanical clearance, etc.

Welding Visual Inspection and defects checks by NDT methods (UT, PT, MT, RFI) with respect to the relevant codes WPS and PQR.

Co- ordinate with sub-contractor for NDT activities like radiographic testing, magnet particle testing, Ultrasonic testing and penetrant testing.

Closing and issuing of Nonconformance Reports (NCR’s) and Site Observation Reports (SOR’s). Studied and reviewed plans, specifications and applicable standard code for welding works, Fit-up, pipe spool.

Ensured verification of inspection performance by conducting regular inspections, verification of corrective actions, and subcontractor's NDE performance.

Review of Work packages (Pipe line, equipment erection, structures and field erected tanks).

Inspection of building project and overall installation of Mechanical equipment’s e.g. Chillers, Boilers, Heat Exchangers, Tanks.

Responsible for incoming materials inspection with respect to specification, material approval and quality plan

Meeting with Third Party Inspectors to collect feedback of their Quality Surveillance at site for implementation of QA system, Concerns, Method for Continual improvement.

Inspection of the Piping system by studying the general arrangement GA drawings, Isometrics & support details

Reviewing of Operation and Maintenance Manuals

Ensure proper Non Conformity detection and recording, as well as relevant corrective actions implemented

Pre Commissioning verification for construction and installation activities.

Taking preventive and corrective actions for the non-conformities observed in site.

Establishing WPS & PQR and ensure the preparation of the QA/QC related dossier for final handover to the Client.

COMPANY: Action International Services, Dubai. UAE

POSITION: Site Engineer

PROJECT: Construction of High Rise buildings, Hotels Dec 2008 - March 2013

Over all Site in charge

Carried out routine inspection of dewatering system to ensure optimum performance.

Prepare progress report, scheduling of activities to achieve targeted progress.

Prepared work orders and receive complaints and instruct subordinates to facilitate work

Check lay-out and supervised the installation of dewatering equipment’s includes; Submersible pumps, CPB’S, DB’S, NRV’S, Valves, Breaks tanks, HDPE Pipes, Generators and laying of hoses to comply as per approved drawing and specifications.

Conduct inspection on any reported breakdown, ensured corrective maintenance is carried out, check before start-up and make appropriate reports to operation manager.

Prepared requisition of all materials and tools needed in site.

Prepared daily and monthly reports, and preventive maintenance schedule

Maintained good housekeeping on action dewatering system and lay down areas.

Daily inspection of flow maters, water levels and water quality.

Ensured that subordinate carried out routine check on Generators, Cables, socket’s, CPB’S and DB’S for efficient performance.

COMPANY: Setraco Nigeria PLC

POSITION: Mechanical Engineer

PROJECTs; Re-Structuring and Re-engineering of Life Breweries PLC, Nigeria &

Renovation of Aluminum Smelter Company, Nigeria. Dec 2004 – Nov 2008

KEY ACTIVITIES:

Overseeing and managing the site work force and resolving any technical issues and other problems that may arise.

Preparation of work schedule; checked drawings and plans to ensure accuracy and conformity.

Preparation of data sheets, specifications and material requisition for Firefighting materials such as Sprinklers, Valves (Check, Gate), Pumps etc.;

Preparation of data sheets, specifications and material requisition for HVAC equipment’s such as Volume control damper, Liner Sloth diffuser, Sound Attenuator, Fire Damper, Grills and Plenum box etc.;

Liaising with clients and representative which includes Surveyors, QA/QC and other Sub contractors

Monitoring;

Layouts and Installations of HVAC equipment’s such as Pumps, AHU, FAHU’S, FCU, volume damper, heat exchangers, Diffusers, Grills, Plenum box etc.;

Installation and Insulation of Fresh air, Exhaust air, Supply air ducts, hangers and supports as per shop drawing;

Installation of sprinklers, valves (check, gate,) etc.;

Installation and insulation of piping works to include underground and above ground piping, Chilled water pipes, firefighting pipes etc.

Carried out site routine supervision to ensure reliable cost effective implementation of the works and ensured that the works are in compliance to international and existing local codes & standards

Supervision of Pipe spool marking, pipe cutting, and joints fit-up as per approved drawings, WPS joint details and ASME B31.1 and dimensional inspection of pipe spools prior to welding and after welding.

Ensured adherence to safety rules, procedures in all site activities, appropriate PPE worn before any work is done and proper housekeeping.

Records all significant data gathered on testing, operation of all HVAC, Firefighting, and plumbing equipment’s for compilation.

Prepared daily, monthly and progress reports.

Checked, monitor and control proper handling and storage of materials and equipment’s at site with regards to company standard.

Ensured that all job is done according to project specifications and procedures and monitored to completion.

COMPANY: National Fertilizer Company (Nig) LTD, Nov 2000- Nov 2004

POSITION: Workshop Superintendent (Mechanical)

SECTION: Rotating Equipment workshop

KEY ACTIVITIES:

Prepared schedule for project and procured necessary materials and man power for same

Evaluated maintenance records of mechanical equipment on a regular basis and ensured that equipment’s work effectively.

Assisted mechanical maintenance department by interpreting blueprints and schematics to complete process.

·Documented all repair and maintenance work performed on equipment’s.

·Designed work packages and equipment specifications for workshop and prepared equipment list.

·Supervise, repair and service of all rotating equipment and machinery in the manufacturing unit.

·General over view of administrative activities and Management of workshop personnel.

Planning of maintenance work in advance in other not to affect the companies output.

·Inventory of equipment needed for repair is always taken.

·Support the advance planning of rotating equipment maintenance scopes to ensure safe, efficient delivery in the plant.

EDUCATIONAL QUALIFICATION:

HIGHER DIPLOMA IN MECHANICAL ENGINEERING 1999

METALLURGICAL TRAINING INSTITUTE DIPLOMA (MECH ENG) 1997

PROFESSIONAL TRAINING:

ISO 9001:2008 Quality Management System, QMS.(DISS) From ALYSJ JV

IOSH managing safely, (DISS.) From ALYSJ JV

QUALITY AWARENESS Training (DISS) from JGC Corporation.

Train the Trainer from SETRACO NIG PLC

PROFESSIONAL CERTIFICATION

NDT (ANST) Level II on: Ultrasonic Testing, Penetrant Testing, Magnetic Particle Testing, Radiography Film Interpretation, Visual Testing, Eddy Current Testing.

Occupation NDT al Safety and Health Administration (OSHA)

Contact this candidate