Personal Details

Name : Anacleto R. Valdez Jr.

Position : QC Engineer – Electrical/Piping

Date of Birth : 05 September 1982

Nationality : Filipino

Civil Status : Married

Contact Details: +639********* ; +639*********

Current Address:

078 Washington Road, Santa Ana

Agoo, La Union, Philippines 2504

Contact No:

+639********* / +639*********

E-mail Add:

ac9abh@r.postjobfree.com

Experience Summary

With more than ten (10) years of overseas QC experience in the construction of O&G, Petrochemicals and Power Plants.

Primarily involved in the inspection and testing of E&I, Piping, Structural and Mechanical field installations.

Previously employed under a reputable company which ensures good quality and workmanship in accordance with project specifications, governing codes and standards.

Possesses an adequate experience, knowledge and skills in implementing and executing any delegated tasks. Highly motivated and focused on achieving project objectives with safety and quality values in mind.

Certification / Accreditation

Registered Electrical Engineer (REE 0037895)

Professional Regulation Commission, Philippines

April 2006

Member - Institute of Integrated Electrical Engineers of the Philippines, Inc.

Membership Certificate No. 13143

Member – Saudi Council of Engineers

Membership No.: 191619

Registered Safety Officer

RSO License No. 5066

International Board of Environmental Health and Safety, Tucson, Arizona, USA

Member - International Association of Safety Professional

Membership No. IASP 006970

Certified Permit Issuer

H2S Specialist / Authorized Gas Tester

AUTO CAD (2D/3D) Operator

Summary of Work Experiences

Company : Al Rushaid Construction Company / EEI

Project Name : Jazan Refinery EPC 12

EPC / Client : DAEWOO / Saudi Aramco

Position : QC Engineer – Piping (Turnover)

Period : June 2017 to May 2018

Duties and Responsibilities

Directly reports to QC Manager the updates of daily work activities such as Turnover Packages or System dossier for the project completion.

Organize and facilitate turnover meeting to expedite and align target and milestone completion.

Coordinate and organize mechanical completion walkthroughs to client for effective and productive result.

Ensures preparation, compilation, control and handover of the Test Package Dossier is aligned with construction’s schedule, transition to system commissioning milestone.

Update status of Turnover Packages and dossier as well as the punch close out on database – WENDS and CMS as per system completion or milestone.

Supervise, instruct, motivates and guides colleagues to implement and

execute the project quality requirements to their respective job

assignments.

Monitor Piping Test Package and daily inspection activities at site for the correct execution of work.

Conduct weekly toolbox meeting.

Company : Al Rushaid Construction Company / EEI

Project Name : SAIPEM Petro Rabigh Refinery Plant Phase 2

EPC / Client : SAIPEM / ARAMCO

Position : QC Engineer – Piping (Turnover)

Period : April 2016 to April 2017

Duties and Responsibilities

Monitor and control Piping Test Packages on database – WENDS and QMIS.

Ensures that Piping Test Package are reviewed and accepted and all discrepancies are properly coordinaed with Piping Construction team for clarification.

Provide correct and completed check sheets to be uploaded in the database together with the remaining punch list included in each test package.

Review and evaluate each sub-system and system and determine which is ready for issuance of DCC (Discipline Completion Certificate).

Coordinate with construction and pre-commissioning team for timely completion and submission of required check sheets prior to system walk down and as per system completion schedule.

Generates daily reports and data to Turnover Groups for systems ready for Mechanical Completion walk down for non- process and process systems.

Supervise, instruct, motivates and guides colleagues to implement and

execute the project quality requirements to their respective job

assignments.

Monitor Restoration Piping Test Package.

Conduct weekly toolbox meeting.

Company : Al Rushaid Construction Company / EEI

Project Name : SADARA KFIP – SASREF Facilities

EPC / Client : FLOUR ENGINEERING / DOW / ARAMCO

Position : QC Engineer – Lead Piping

Period : March 2013 – March 2016

Duties and Responsibilities

Provides 3 weeks look ahead working schedule as per piping operation

activities.

Disseminate work to colleagues and guide them for smooth inspection.

Conduct daily meeting for quality related issues at site and balance inspection.

Monitor Piping Test Package Status – Aboveground and Underground.

Coordinates with Construction and Client for smooth planning and execution of work.

Generates Non-Conformance and surveillance report for the non-conforming works and items.

Conduct line checking and punch listing of piping and E & I system as per approved drawing and P&ID.

Confirmation of punch killing, restoration and re-installation of piping and E&I system packages.

Company : Al Rushaid Construction Company / EEI

Project Name : SAMCO Project

EPC / Client : SAMCO / TASNEE - SABIC

Position : QC Engineer – Electrical/Piping

Period : August 2011 – July 2013

Duties and Responsibilities

Monitor and witness installation and insulation resistance test of low voltage

and medium voltage cables.

Witness and assist high potential testing of medium voltage cables.

Witness and assist Attenuation testing of fiber optic cables.

Witness and assist cable connection torque test.

Witness illumination testing of lightings and instrument calibration testing.

Generates punch list for the work deviation against specified drawing requirements and specification.

Conduct Preparation of Inspection Request and Testing, including direct

coordination with client representative for the smooth implementation

and execution of inspection activities.

Conduct Inspection of fit up prior to full welding.

Witness air blowing, flange face and bolt tightening and tensioning

inspection.

Prepare and review Piping Test Package.

Punch listing and line checking of piping system as per approved drawing.

Witness Hydro and Pneumatic Testing on piping system.

In charge in restoration and re instatement of piping system.

Witness pipe laying and alignment of Under Ground piping.

Generates Non-Conformance and surveillance report for the non-conforming works of piping operations.

Company : Al Rushaid Construction Company / EEI

Project Name : National Chevron Philips (NCP)

EPC / Client : JGC / NCP - SABIC

Position : QC Engineer – Piping/Instrument

Period : October 2010 – August 2011

Duties and Responsibilities

Witness popping test/calibration of PRD valves and gauges.

Conduct preliminary and final inspection on impulse tubing and air piping

tubing.

Witness hydro test and pneumatic test on impulse tubing and air piping

tubing.

Conduct preliminary inspection on instrument cables prior insulation resistance test.

Witness insulation resistance test on instrument cables.

Conduct line checking on piping system and generate punch list for the

work deviation against specified drawing requirements and specification.

Witness hydro test, pneumatic test and visual test on piping system.

Conduct visual inspection on flange face serrations, gaskets and bolts and nuts together with client inspector for restoration works of piping system.

Company : Al Rushaid Construction Company / EEI

Project Name : SHUQAIQ II IWPP

EPC / Client : MHI / SHUQAIQ - SABIC

Position : QC Inspector – Electrical

Period : April 2009 – April 2010

Duties and Responsibilities

Preparation of inspection request and testing, including direct coordination

with client representative for smooth implementation and execution of

inspection activities.

Monitor and witness installation and insulation resistance test of low voltage

and medium voltage cables.

Witness and assist high potential testing of medium voltage cables.

Witness and assist Attenuation testing of fiber optic cables.

Witness and assist cable connection torque test.

Witness illumination testing of lightings and instrument calibration testing.

Generates punch list for the work deviation against specified drawing requirements and specification.

Company : Al Rushaid Construction Company / EEI

Project Name : SHARQ 3rd Expansion Ethylene Plant

EPC / Client : SHAW Stone and Webster / SHARQ - SABIC

Position : QC Engineer – Electrical/Piping

Period : July 2007 – March 2009

Duties and Responsibilities

Monitor quality related issues.

Responsible for Material Receiving Inspection both electrical and piping materials.

Conduct inspection on electrical panels prior installation at site.

Conduct continuity test of low voltage cables prior installation.

Responsible for inspection of pipe spools and structural materials in

fabrication shop and in lay down areas.

Conduct fit-up and visual inspection on welded joints.

Conduct Positive Material Identification (PMI).

Prepare daily accomplishment reports.

Issue punch list for operation rectification.

Punch listing and line checking of piping system as per approved drawing.

Prepare and review Piping test packages.

Monitor and witness air blowing, hydrostatic and pneumatic testing.

Conduct final Inspection of electrical equipment panel together with client representative prior installation at site.

Education and Training

2001–2006 Bachelor of Science in Electrical Engineering (BSEE)

Don Mariano Marcos Memorial State University

Mid-La Union Campus, Philippines

AutoCad (2D/3D)

GMS Technology, Baguio City, Philippines

Basic Occupational Health and Safety (BOSH)

JGT/HPP STCS Training Services, Baguio City, Philippines

Construction Occupational Health and Safety (COSH)

JGT/HPP STCS Training Services, Baguio City, Philippines

Safety Officer Training Course for Construction, Petrochemical and Oil and Gas Industries

RODECH Training Services Link International Inc., Baguio City, Philippines

RigPass Onshore and OffShore Endorsement

Standard First Aid, CPR and AED

Water Rescue and Sea Survival

Fire and Safety Management

Oil and Gas Exploration and Drilling Operation

Advance Solar PV Installation Training

One Point System Technologies(TrinaSolar), Angeles, Pampanga, Philippines

QC – IEDP Crash Course

EEI Corporation (Home Base), Philippines

ISO 9001:2000 – Orientation and Implementation

ARCC/EEI Corporation, Saudi Arabia

Material Receiving Seminar

ARCC/EEI Corporation, Saudi Arabia

Piping Inspection Seminar

ARCC/EEI Corporation, Saudi Arabia

Welding Inspection Seminar

ARCC/EEI Corporation, Saudi Arabia

Skills

Knowledge in the following computer system software, electrical and piping codes, specifications and standards:

Microsoft Office (Word, Excel, Power point)

National Electrical Code (NFPA 70),

ASME B31.3, B31.1, SECTION V, SECTION IX

API 598

DEP Specification

Character References:

Upon request.

Contact this candidate