Power Plant Mechanical
Resume:
Post Applied for: -Mechanical Engineer
RESUME
DIPTANGSU SEKHAR PANDA.
HARIPUR, NANDIGRAM.
PURBA MIDNAPUR.
WEST BENGAL.
PIN COD NO: -721631.
E-Mail: - ****.**********@*****.***
***********@*****.***
********************@*****.***
Mobile: +91-959*******/973-***-****
OBJECTIVE :
To pursue a successful and rewarding career by working in competitive and challenging assignments, to contribute the best of my ability towards the growth and development of a progressive company.
EDUCATIONAL QUALIFICATION:
1. SCHOOL LEVEL:
Qualification : 1. 10th. Devipur Milan Vidhapith.2001.
2. 12th . Nandigram B.M.T.S.2003.
2. COLLEGE LEVEL:
Qualification : B.TECH (mechanical).
Experience
13 Years with Multinational and International Companies in Oil & Gas Fields, Oil Refineries, Petrochemical Plants,
Work History
24.07.2018 to Till now.
Working with Laxmi Engineering Industries Pvt. Ltd in Dubai as a Erection Mechanical Engineer. Air cooled condenser at Union Paper Mil Project.
Major Responsibilities:-
Manage/ Supervise or discipline Construction activities and ensure that all works are completed according on schedule and to appropriate levels of quality & HSE and also manage the pre commissioning activities in safe manner.
Review of Approved for Construction (AFC) drawing...
Coordination with client & sub-contractor for daily progress reports daily construction Activities plan.
Analysis resources availability as a transpiration of manpower tools of equipment’s.
Looking after blasting and painting with technical safety data sheet for piping and structural material.
Preparation of piping & Ducting documents like line history sheets. As built and mechanical Clearance.
Review of (P&ID) general (GA) drawing & isometrics for construction purpose.
Execution of Erection activities all Piping, Duct, Tube bundle,Gear box, Motor, Pump,Fan Ring with Blade,Ejector, Condensate storage tank & Structure .
Completion of project schedule as per client requirement.
Piping& Support material storage and preservation.
05.08.2017 to 28.05.2018.
Working with Hindustan platinum pvt. ltd In Mumbai as a Mechanical Engineer.
Major Responsibilities:-
Manage/ Supervise or discipline Construction, Maintenance activities and ensure that all works are completed according on schedule and to appropriate levels of quality & HSE in safe manner.
Preparation for bill of material and material transits order by review of Approved for Construction (AFC) drawing.
Preparation for invoice .
Coordination with client & sub-contractor for daily progress reports daily construction Activities plan.
Analysis resources availability as a transpiration of manpower tools of equipment’s.
Looking after blasting and painting with technical safety data sheet for piping and structural materials.
Ensure of test packs & mechanical punch list and give mechanical clearance for hydro testing.
Preparation of piping documents like line history sheets. As built and mechanical Clearance.
Review of (P&ID) general (GA) drawing & isometrics for construction purpose.
Execution of Shutdown activities all piping& Equipment .
Completion of project schedule as per client requirement.
Piping& Support material storage and preservation.
Tie in activities lines.
28.08.2016 to 28.03.2017.
Working with Burhan pioneer service (EMC PROJECT PDO) In Oman as a Mechanical Engineer with Permit Applicant.
Major Responsibilities:-
Manage/ Supervise or discipline Construction activities and ensure that all works are completed according on schedule and to appropriate levels of quality & HSE and also manage the pre commissioning activities in safe manner.
Preparation for bill of material and material transits order by review of Approved for Construction (AFC) drawing.
Piping cold cutting and demolition activity.
Preparation for invoice .
Coordination with client & sub-contractor for daily progress reports daily construction Activities plan.
Analysis resources availability as a transpiration of manpower tools of equipment’s.
Looking after blasting and painting with technical safety data sheet for piping and structural materials.
Ensure of test packs & mechanical punch list and give mechanical clearance for hydro testing
Preparation of piping documents like line history sheets. As built and mechanical Clearance.
Review of (P&ID) general (GA) drawing & isometrics for construction purpose.
Execution of commissioning activities all piping.
Completion of project schedule as per client requirement.
Piping& Support material storage and preservation.
Tie in activities lines.
PE & Roto Piping & Pipe line erection and alignment on-plot & off-plot.
Tie in activities lines.
24.07.2015 to 14.07.2016.
Working with Alpha beta construction PVT LTD. In India(Surat) as a Mechanical Engineer with Site in charge .
Major Responsibilities:-
Manage/ Supervise or discipline Construction activities and ensure that all works are completed according on schedule and to appropriate levels of quality & HSE and also manage the pre commissioning activities in safe manner.
Preparation for bill of material and material transits order by review of Approved for Construction drawing
Execution of platform, pipe supports fit-up welding shifting at site blasting and Painting installation as per -drawing.
Coordination with client & sub-contractor for daily progress reports daily construction Activities plan.
Analysis resources availability as a transpiration of manpower tools of equipment’s.
Looking after blasting and painting with technical safety data sheet for piping and structural materials.
Ensure of test packs & mechanical punch list and give mechanical clearance for hydro testing
Preparation of piping documents like line history sheets. As built and mechanical Clearance.
Review of (P&ID) general (GA) drawing & isometrics for construction purpose.
Execution of commissioning activities all piping.
Completion of project schedule as per client requirement.
Piping& Support material storage and preservation.
20.05.2012 to 24.12.2014.
Working with Wood Group-CCC (EMC PROJECT PDO) In Oman as a Mechanical Supervisor with Permit Applicant.
Major Responsibilities:-
Manage/ Supervise or discipline Construction activities and ensure that all works are completed according on schedule and to appropriate levels of quality & HSE and also manage the pre commissioning activities in safe manner.
Preparation for bill of material and material transits order by review of Approved for Construction (AFC) drawing
Preparation bill of quantity for piping activities such as no’s of joints .no’s of Supports. no’s of supports welding. Nondestructive test (NDT)
Execution of platform, pipe supports fit-up welding shifting at site blasting and Painting installation as per AFC-drawing.
Coordination with client & sub-contractor for daily progress reports daily construction Activities plan.
Analysis resources availability as a transpiration of manpower tools of equipment’s.
Looking after blasting and painting with technical safety data sheet for piping and structural materials.
Ensure of test packs & mechanical punch list and give mechanical clearance for hydro testing
Preparation of piping documents like line history sheets. As built and mechanical Clearance.
Review of (P&ID) general (GA) drawing & isometrics for construction purpose.
Execution of commissioning activities all piping.
Completion of project schedule as per client requirement.
Piping& Support material storage and preservation.
Tie in activities lines.
PE & Roto Piping & Pipe line erection and alignment on-plot & off-plot.
Tie in activities lines.
Installation of steel structure for rotary type high pressure and injection gas compressors air cross flow heat exchangers.
Fallow Cooled cutting of (24’’to1”) pipes.
Prepared the As belt as per site condition.
20.03.2010 to 20.03.2012.
Working with Arabian Industries Project LLC. Amal Stem Project (PDO).Five major Project (ORPC) Sohar. Pige-trape Project (OGC) Sohar in Oman as a Mechanical Supervisor
Major Responsibilities:-
Manage/ Supervise or discipline Construction activities and ensure that all works are completed according on schedule and to appropriate levels of quality & HSE and also manage the pre commissioning activities in safe manner.
In directly involve Orpc .Oman Refinery and petrochemical looking after overall execution of CRS On plot piping and piping supporting and gas separator and water bath heater and instrument gases vessel etc.
Materials and Materials transit order by review of client drawings.
Also looking after technical specification of piping materials
Procured for the project as per the approved technical documents.
Execution of piping activity such as fit up, welding
Also fabrication and installations piping supports as per supports standard drawing
Ensure of punch list and given mechanical clearance for hydro tasting
Project schedule completions as per client requirement
Piping &Support fabrication, fit up, welding, erection and alignment
Piping &Support material storage and preservation.
Test packs, line checking and punch points closing.
Knowledge of Hydro/Pneumatic Test.
Piping & Pipe line section replacement on-plot
Piping & Pipe line section replacement off-plot
Skid erection and alignment.
PCV Replacement
PSV Replacement.
Pige-trape erection and alignment.
Installation of steel structure for injection Skid & heat exchangers.
08.05.2008 to09.08.2009.
Worked with Technical Scorce. Hyundai. Saudi Arave. As a Mechanical Forman at Marafiq. IWPP. Project.
Major Responsibilities:-
Piping &Support fabrication, fit up, welding, erection and alignment.
Piping &Support material storage and preservation.
Ensure of punch list and given mechanical clearance for hydro tasting.
Test packs, line checking and punch points closing.
Knowledge of Hydro/Pneumatic Test.
Piping & Pipe line section replacement on-plot
Piping & Pipe line section replacement off-plot
Skid erection and alignment.
Executed overall piping activities for valve stations and scrapper recover Stations & scrapper recover- launcher station.
Installation of cooling fans for rotary type high pressure and injection gas compressors.
05.07.2007 to.05.01.2008.
Worked with Consolidated Contractors Company. Kuwait. As a Mechanical Forman at W.L.L.0L2K Ethylene Project.
Major Responsibilities:-
Piping &Support fabrication, fit up, welding, erection and alignment.
Piping &Support material storage and preservation.
Knowledge of Hydro Test.
Punch killing.
Installation of all type of valves.
02.11.2005 to 27.06.2007.
Worked with Sabita Const.Pvt.Ltd,(Surat).India as a Supervisor at Reliance Cracer,Pta-3,Cpp Boiler no-8,9,10 & Cp-11 Project.
Major Responsibilities:
Piping &Support fabrication, fit up, welding, erection and alignment.
Piping &Support material storage and preservation.
Structure fabrication, fit up, welding, erection and alignment.
Ensure of punch list and given mechanical clearance for hydro tasting
Tie in activities lines.
Installation of all type of valves.
Punch killing.
Shutdown activity.
07.03.2005 to03.09.2005
Worked with Royal Construction Company, (Kolkata) .India as a Supervisor at Praxair Liquid Nitrogen& Oxygen Project.
Responsibilities:
Installation of steel structure for rotary type high pressure and injection gas compressors air cross flow heat exchangers.
Installation of cooling fans for rotary type high pressure and injection gas compressors.
Installation of suction knock out drums for rotary type high pressure and injection gas compressors.
Installation of nitrogen gas generator.
Grouting for compressors and steel structure columns Ep 150and Ep 300.
Installation of all type of valves.
Installation of piping spool.
Preparation of hydro test
02.06.2003 to 10.01.2005
Worked with Lensh Engineering Pvt Ltd, Gandhidham .India as a Supervisor at New power plant project.
Responsibilities:
Piping fabrication &erection of carbon steel spool.
Piping fabrication &erection of stainless steel spool.
Preparation of hydro test
Installation of all type of valves.
Installation of suction knock out drums for rotary type high pressure and injection gas compressors.
Ensure of punch list and given mechanical clearance for hydro tasting.
PCV Installation & Replacement
PSV Installation & Replacement
SKILL SETS:
Computer Knowledge : AUTO CAD, WINDOWS, MS-OFFICE,
Technical Qualification 1. : 1. ASNT Level II in Radiography Testing.
2. ASNT Level II Ultrasonic Testing.
3. ASNT Level II in Magnetic Particle Testing.
4. ASNT Level II in Penetrate Testing
Technical Qualification 2. : B.TECH (mechanical)
HSE TRANING:
I AM A PTW APPLICANT. HAVE A VALID PTW CARD.
H2S, Safety Training
HSE Induction Training – Petroleum Development Oman - Muscat, Oman.
SLS Training-Petroleum Development Oman -Muscat, Oman.
HTS Training-Petroleum Development Oman -Muscat, Oman.
CMC Training-Petroleum Development Oman -Muscat, Oman
GAS TEST Training-Petroleum Development Oman -Muscat, Oman.
FAIR Training-Petroleum Development Oman -Muscat, Oman.
PTW Training-Petroleum Development Oman -Muscat, Oman.
FIRST AID CPR AED Training-Petroleum Development Oman -Muscat, Oman.
Petroleum Development of Oman.
PERSONAL PROFILE:
Father’s Name : DEBASIS PANDA.
Date of Birth : 12.04.1985.
Sex : MALE.
Marital Status : SINGLE.
Nationality : INDIAN.
Languages Known : BENGALI, HINDI, AND ENGLISH.
Passport Number : N-8970810
DECLARATION
I hereby declare that the above furnished information is true to the best my knowledge.
Yours Truly,
PLACE:
DATE : (DIPTANGSU SEKHAR PANDA)
GSM NO: +91-959*******/973-***-****
Contact this candidate